Products in Resins & Binders: Steel

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

VINNAPAS® EP 6300 is a high-solids vinyl acetate-ethylene (VAE) copolymer dispersion with carboxylation. It has a glass transition temperature (Tg) of 0°C. This dispersion exhibits excellent adhesion to films and metals, and it also offers impressive cohesive film strength. Furthermore, it has the ability to be crosslinked.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

Dynasylan® SIVO 110 stands as a versatile, virtually VOC-free, water-borne sol-gel system. It integrates organofunctional silanes with nanoscale SiO2 particles. This product, available as an opaque to milky, colorless to slightly yellow, low-viscosity liquid, can be diluted in water and common organic solvents. Dynasylan® SIVO 110 features reactive silanol groups and Si-bonded epoxy-based organic functionalities.

Dynasylan® SIVO 160 presents a water-borne, storage-stable silane-based sol-gel system engineered for formulating inorganic surface treatment primers. A part of the SIVO® SOL Technology, it inherits the benefits of its established series counterparts by excluding heavy metals, fluorides, and solvents. Designed for minimal volatile organic content, its polymeric nature endows it with high reactivity. This is highlighted by its remarkably low curing temperature range of 20 to 80 °C, a significant advancement for water-borne sol-gel systems. Dynasylan® SIVO 160, appearing as a clear to slightly opaque, colorless to slightly yellow, low-viscosity liquid, offers versatile utility.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Acrylic Bead Resins TB-322 is a solid bead methacrylate copolymer intended for use in solvent-based coating systems where improved adhesion to difficult metals is important. TB-322 exhibits excellent outdoor durability. The resin may be used in adhesives and a variety of metal coatings applications such as transportation finishes in automotive, container and other marine coatings, and a variety of brass and aluminum coating applications.   *Acrylic Bead Resins is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

AGC Chemicals Americas, Inc. LUMIFLON® LF-916F is a low molecular weight resin that is used to create coatings with high crosslink density. This resin is made of alternating fluoroethylene and alkyl vinyl ether segments (FEVE) and comes in flake form to comply with regulations for VOC and HAPS. It can be dissolved in solvents that are exempt from these regulations, such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate. These resins are used to produce coatings that are highly resistant to weathering, and are commonly used in various industries like architecture, aerospace, automotive and industrial maintenance.

AGC Chemicals Americas, Inc. LUMIFLON® LF-200F is a moderate molecular weight, moderate hydroxyl number resin consisting of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). This product has been developed in flake form in order to enable formulators to meet VOC and HAPS regulations. This resin can be dissolved in VOC and HAPS exempt solvents such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate to meet the strictest air quality requirements. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-081 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE ZH-885B is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as hard coat, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2150 is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as low-melt ETFE, smooth surface, non-adhesive, semi-commercial coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-885C is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-521N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-8820X is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-520N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and 20% carbon fiber undercoat. Various powder grades are available for different processing methods and application needs.

Domopol 6115 is a solvent-free polyester and polyether polyol developed for use in the formulation of 2K coatings. With this resin the coatings are tough and flexible, hard-wearing and chemically resistant.Features & BenefitsSolvent-free2K coatingsHard-wearing and chemically resistant coatings

Domacryl 5196 60 SA is a hydroxy acrylic resin used for air and forced drying top coats with good lightfastness and chalking resistance. This resin is suitable for two-component ACE and high-grade industrial coatings.Features & BenefitsGood lightfastnessChalking resistance

Domopol 5193 70 X is a saturated polyester resin developed for automotive primer surfaces and metallic base coats. This resin can also be used for outdoor durable, non-yellowing one coat stamping and deep drawing coil-coating systems for aluminum, sheet steel and tin sheet.Features and Benefits :Automotive primer surfacesMetallic base coat

Domalkyd 0234 80 DMM is an alkyd resin, water reducible after neutralization, developed for use in water-borne two-component PUR coatings and stoving systems for industrial steel and aluminum application. The bio-based content is 62% (32% of the dry matter by the Carbon-14 method and an additional 30% via a biomass balance (BMB) approach as certified by the ISCC PLUS).Features & Benefits62% biobased on solid contentWater reducable after neutralizationGood resistance to chemicalsHigh glossGood hardness and elasticity properties

Domalkyd 9375 50 X is an acrylic and styrene modified alkyd resin developed for fast drying industrial primers and finishes for metal and radiator enamels.Features & BenefitsVery fast airdrying paintsHigh glossExcellent adhesion on aluminum and steelGood recoatabilityVery good moisture resistance

Domopol 5174 60 SAB/MPA ND is a saturated polyester resin developed for coil coating primers on steel and HDG. The bio-based content is 24% of the dry matter via a biomass balance (BMB) approach as certified by the ISCC PLUS.Features and Benefits :24% biobased on solid content HDG steel primers

Domalkyd 0545 40 Wa is a PU modified alkyd emulsion without organic solvents designed for yellowing-resistant top coats and onecoat paints for industrial application (air and forced drying) on wood, steel and aluminum with excellent gloss retention and elasticity. This resin contains no emulsifiers and may be thinned with water at all ratios. Coating systems based on Domalkyd 0545 40 Wa exhibit very rapid physical drying. The bio-based content is 60% (47% of the dry matter by the Carbon-14 method and an additional 13% via a biomass balance (BMB) approach as certified by the ISCC PLUS).Features & Benefits60% biobased on solid contentSolvent freeRapid air dryingHigh glossGood water and chemical resistance

Domopol 5200 75 BAc is a special purpose resin developed to improve adhesion of paints to various substrates. This resin is also suitable for high solids coatings formulations.Features & BenefitsImprove adhesion of paintsAdhesion improvement on aluminum, steel and galvanized steeSuitable for high solids coatings