Products in Other Resins & Binders: Solventborne Adhesive

SILRES® 64558 VP is a toluene-based, ready-to-use formulation based on polysiloxanes and silicone resins. The product is preferably used as a binder in highly flexible composite tapes or as an intermediate to manufacture silicone pressure-sensitive adhesive (PSA) formulations. In composite tapes, SILRES® 64558 VP contributes to the tapes' excellent electrical insulation properties and outstanding long-term heat resistance. Besides, composite tapes made with SILRES® 64558 VP are highly stable against environmental impacts such as moisture, pollutants, and UV light, allowing them to be exposed continuously to constantly changing climatic conditions or UV radiation.

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 10 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless. Typical applications for VINNAPAS® UW 10 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 4 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. Typical applications for VINNAPAS® UW 4 FS include fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

VINNAPAS® UW 25 FS is a solid, thermoplastic homopolymer. This clear and colorless resin is produced through the polymerization of vinyl acetate. It is tasteless and finds application in building and construction adhesives, as well as resin modification for composites. The product is available in the form of solid, colorless beads that are odorless and tasteless.

VINNAPAS® UW 2 FS is a solid, thermoplastic homopolymer. The resin is clear, colorless, and tasteless, and it is produced by polymerizing vinyl acetate. This versatile product finds typical applications in fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

DEHESIVE® PSA 11 AP is a solvent-free, reactive silane mixture. Applied with addition-crosslinking DEHESIVE® or DEHESIVE® PSA-systems, it increases the adhesion to the substrate. The rub-off resistance of the cured silicone coating is improved significantly. It provides improved anchorage to unprimed PET film.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flyprene SBS 791H is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flyprene SBS 792 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 40% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Trapylen® 186 X is a medium-chlorinated polypropylene dissolved in xylene. Characterized by a higher chlorine content compared to other grades, it exhibits relatively good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film produced by Trapylen® 186 X boasts high gloss and remarkable chemical and aging resistance. Its primary advantage lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, to a limited extent, polyethylene.

Trapylen® 186 S is a chlorinated polypropylene with a higher chlorine content compared to other Trapylen® grades. It demonstrates good compatibility with other resins and polymers, excellent pigment wetting, and forms a high-gloss, chemically resistant film. The primary merit of Trapylen® 186 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene.

Trapylen® 187 EAC is a chlorinated polypropylene dissolved in ethyl acetate. It possesses a slightly lower chlorine content compared to the similar Trapylen® 186 EAC but maintains good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 EAC lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Trapylen® 186 EAC is a chlorinated polypropylene dissolved in ethyl acetate. With a higher chlorine content compared to other Trapylen® grades, it exhibits good compatibility with other resins and polymers, excellent pigment wetting, and results in a high-gloss, chemically resistant film. The main advantage of Trapylen® 186 EAC is its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited.

Trapylen® 187 S is a chlorinated polypropylene characterized by a higher chlorine content compared to other Trapylen® grades. This feature results in good compatibility with other resins and polymers, coupled with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

FloraRez® HR is gum rosin that has been subjected to a high degree of hydrogenation. This results in a nearly colorless thermoplastic resin that has excellent thermal and oxidative stability characteristics, which are a result of the hydrogenation process. Compared to unmodified gum, wood, and tall oil rosins, FloraRez® HR offers the highest degree of color and solubility stability for its derivative products.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

FloraRez® 485 is a high-quality glycerol ester derived from partially hydrogenated gum rosin that has undergone purification to ensure exceptional taste and odor characteristics. It is meticulously protected from contaminants. This pale-colored thermoplastic resin possesses a low acid number. In numerous countries, it is considered suitable for incorporation into chewing gum bases as an ingredient. Additionally, it serves as a resin component in a wide range of applications, including adhesives, inks, coatings, and personal care formulations, where oxidative stability is needed.

FloraRez® G85 is the glycerol ester of gum rosin, which is also known as ester gum. It is a pale-colored thermoplastic resin that has a low odor and low acid number. FloraRez® G85 is commonly used as a resin component in various adhesives, inks, coatings, and personal care compositions.

Guangxi Zhongchang Resin RGM128W is a maleic modified glycerine ester of gum rosin. designed to provide aliphatic compatibility in ink or oil paint formulations. The good solubility makes it a good co-resin to adjust solubility parameters in a wide variety of lithographic ink and varnish applications. It is an excellent pigment wetting resin and is recommended for use in economical flushing varnishes for heatset and sheetfed flushes.

Pine Rosins PR 537.3 is a Non Crystallizing Gum Rosin that are natural resins which have been modified with formaldehyde to increase its resistance against crystallization and oxidation. This type of rosins is similar performance to natural gum rosin keeping the main characteristics in terms of solubility and compatibility. Main difference is its high resistance to crystallization and low VOC content.

NEVCHEM®240 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

Calprene 419 is a 70/30 butadiene/styrene thermoplastic copolymer, polymerized in solution and has a radial structure.This product is available in: - Calprene 419 porous crumb. - Calprene 419M powder form dusted with amorphous silica.

Hot polymerized SBR 1011AE elastomer is recommended for adhesives, pressure sensitive tape and label, and mechanical rubber goods applications where nonstaining and high tack is essential.

Guangxi Zhongchang Resin RPF100A series resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance.Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

Pine Rosins PR 537.1 is a Non Crystallizing Gum Rosin that are natural resins which have been modified with formaldehyde to increase its resistance against crystallization and oxidation. This type of rosins is similar performance to natural gum rosin keeping the main characteristics in terms of solubility and compatibility. Main difference is its high resistance to crystallization and low VOC content.

Guangxi Zhongchang Resin RPF90W series resin series are made from modified rosin with special process. Provide excellent dissolvability in low carbon alcohol, light color aging resistance and light resistance.Widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux.

Pine Rosins PR 537.2 is a Non Crystallizing Gum Rosin that are natural resins which have been modified with formaldehyde to increase its resistance against crystallization and oxidation. This type of rosins is similar performance to natural gum rosin keeping the main characteristics in terms of solubility and compatibility. Main difference is its high resistance to crystallization and low VOC content.

Calprene 501 is a 69/31 butadiene/styrene thermoplastic copolymer, polymerized in solution and having a linear structure.This product is available in: - Calprene 501 porous crumb. - Calprene 501C porous pellet. - Calprene 501M powder form dusted with amorphous silica.

NEVTAC® LT is a highly aliphatic petroleum based liquid tackifying resin with a low softening point designed for low temperature applications. This hydrocarbon tackifer is stabilized with 0.1% antioxidant.

Mangalam Organics Limited ESTER GUM (Penta) is an ester gum is produced by esterification of gum resin with Pentaerythritol.

Guangxi Zhongchang Resin RGM135 is a maleic modified glycerine ester of gum rosin. designed to provide aliphatic compatibility in ink or oil paint formulations. The good solubility makes it a good co-resin to adjust solubility parameters in a wide variety of lithographic ink and varnish applications. It is an excellent pigment wetting resin and is recommended for use in economical flushing varnishes for heatset and sheetfed flushes.

CUMAR® 130 is a thermoplastic low molecular weight, hydrocarbon resin produced by catalytic polymerization of predominantly indene and other aromatic monomers.