Products in Other Resins & Binders: 1K (1 component) Coating

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

SILRES® MSE 100 is the methyl ester of a mixture of different oligomeric methylsilicates. It is a methoxyfunctional methyl polysiloxane. SILRES® MSE 100 is specifically recommended as an ambient-temperature moisture-curing binder for heat-resistant paints. When combined with suitable catalysts, temperature-stable pigments, and fillers, SILRES® MSE 100 becomes the optimal binder for ambient-curing, heat-resistant paints.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

WACKER® Polymer FD 120 is a colorless, clear, and odorless liquid that is not miscible with water. It serves as a raw material for the production of RTV-1 silicone rubbers. This product is specifically used in the compounding of silicone sealants and is suitable for applications in sealants and silicone sealants.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

SILRES® BS 6920 is a silane-terminated binder that utilizes α-silane technology. It is specifically designed for the impregnation of mineral substrates or as a thin layer of coating on mineral surfaces. The formulations based on SILRES® BS 6920 are commonly used for stain-resistant impregnation and coating of various mineral substrates. These substrates can include polished or non-polished concrete floors, paving stones, clinker, bricks, and natural stone. By applying SILRES® BS 6920, the mineral surfaces become more resistant to stains and discoloration, helping to maintain their appearance and durability over time. The binder provides a protective barrier that enhances the performance and longevity of the treated mineral substrates.

WACKER® Polymer AL 08 is a polydimethylsiloxane with dimethoxysilyl end groups. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 08 is used as a reactive polymer in formulations of moisture-reactive sealants, adhesives, and coatings (RTV-1 silicones). Applications include special raw materials for silicone compounding.

WACKER® Polymer AL 110 is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 110 is used as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers. Applications include sealants and silicone sealants.

WACKER® Polymer AL 100 is a polydimethylsiloxane with dimethoxysilyl end groups. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 100 is used as a reactive polymer in formulations of moisture-reactive sealants and adhesives (RTV-1 silicones). Applications include sealants, silicone sealants, and special raw materials for silicone sealant compounding.

WACKER® Polymer AL 60 is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear liquid and is not miscible with water. WACKER® Polymer AL 60 is used as a raw material for the production of alkoxy-cured RTV-1 silicone rubbers. Applications include sealants, silicone sealants, and special raw materials for silicone sealant compounding.

VINNAPAS® 5048 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS, renders and plasters, and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to the basic properties of adhesion and flexibility.

WACKER® Polymer AL 55 M is a polydimethylsiloxane with functional groups and alcoxysilanes. It is a colorless to yellowish, clear to slightly cloudy liquid that is immiscible with water. WACKER® Polymer AL 55 M is used as a raw material for the production of alkoxy crosslinking RTV-1 silicone rubbers.

PerformaSil™ 100 SWBE provides superior application, clean-up, functionality, and a sustainability factor that the entire formulation and manufacturing pipeline benefits from, including additive manufacturers, coating manufacturers, coating application contractors, end-users, and ultimately the environment. This product can be used in the formulation of ambient cure or bake coatings for a wide range of substrates such as masonry, glass, leather, fabric, textiles, and metals. It exhibits outstanding weather, water, and solvent resistance making it an excellent candidate for exterior coatings in harsh weather conditions.

AGC Chemicals Americas, Inc. LUMIFLON® LF-810 Resin is a high molecular weight, low OH number fluoropolymer resin. This product is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with it include architectural, industrial maintenance, and bridge coatings. LUMIFLON® polymers consist of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites.

AGC Chemicals Americas, Inc. LUMIFLON® LF-600X consists of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets. LUMIFLON LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is also being used in ambient cure applications where high coating flexibility is required, for example, in coatings for plastics.

AGC Chemicals Americas, Inc. LUMIFLON® FE-45000 is a water emulsion product developed to enable formulators to meet VOC and HAPS regulations on many solvents in the US. This product has low hydroxyl functionality and is designed for use in single-component coatings. Like other LUMIFLON® resins, it is used to produce coatings with high gloss and excellent weatherability. This product can also be used in blends with standard acrylic resins to substantially improve weathering of these conventional products. LUMIFLON® polymers consist of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. These resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

AGC Chemicals Americas, Inc. LUMIFLON® LF810Y - FEVE Solvent-borne Resin is a solvent-borne fluoroethylene vinyl ether resin that is designed for weather-resistant coatings. It has a high molecular weight, making it suitable for use in high-performance, one-component formulations. Coatings made with LF810Y exhibit high gloss and excellent durability. This general-purpose resin is commonly used in architectural air dry and light-duty industrial applications.

AGC Chemicals Americas, Inc. LUMIFLON® FE-4400 Isocyanate is a water emulsion developed to meet VOC and HAPS regulations on some solvents in the US. It is a hydroxyl functional compound that can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, this product is used to produce coatings with high gloss and excellent durability. LUMIFLON® polymers consist of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. These resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.

BarrierPro 4550 is a general purpose styrene-butadiene emulsion polymer of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as water proofing membranes, specialty paints and sealants.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

BLUEPUR 2937 is an aliphatic coalescent free polyurethane dispersion formulated forparquet coatings. The special chemical structure of BLUEPUR 2937 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems.

BLUEPUR 3037 is an aliphatic coalescent free polyurethane dispersion.The special chemical structure of BLUEPUR 3037 helps the self-crosslinking of the resin and improves the performances even when used in one-component systems. It is suitable for the formulations of sealers and top coat with high flexibility and for all those substrates that undergo post-forming after painting.

Replacol® 277 is butylated phenolic resins.

BLUEPUR 3080 is an aliphatic coalescent free polyurethane dispersion.Thanks to the special chemical structure, BLUEPUR 3080 doesn't require the use of any coalescence into the formulation. This product is for high-elasticity 1K and 2K coatings.

Betolin P 35 is a highly stabilized, highly concentrated and odorless solution of potassium silicate.

Replacol® 260 is alkyl phenol formaldehyde resins.