Products in Other Resins & Binders: Lacquers

Joncryl® HSL 9012, a high-performance member of the Acrylics & Acrylates chemical family, takes the spotlight within CASE Ingredients. Specifically categorized under Resins & Binders in the realm of Other Resins & Binders, this liquid formulation is designed for a range of applications. With a particular focus on printing and packaging, Joncryl® HSL 9012 proves ideal for packaging coatings, primers, and lacquers. In its liquid form, this product ensures ease of use and efficiency in diverse formulations. Trust in the reliability and high performance of Joncryl® HSL 9012 to elevate the quality of your packaging coatings and lacquers.

Joncryl® HSL 9010 is a liquid product with end uses in waterborne ink and lacquers. Recognized for its high performance, it finds applications in the markets of paints and coatings, printing, and packaging. With its liquid physical form, it serves as a coating for primers and lacquers.

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

VINNOL® H 30/48 M is a terpolymer consisting of approximately 70 wt.% vinyl chloride (VC), 29 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It contains carboxylate groups within its structure. This product is primarily employed as a binder for surface coating compounds and printing inks. VINNOL® H 30/48 M acts as a thermoplastic, physically drying binder that forms a film upon evaporation of the solvent in the formulation.

VINNOL® H 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It is primarily employed as a binder in surface coating compounds and printing inks. VINNOL® H 15/45 M functions as a thermoplastic, physically drying binder that undergoes film formation as the solvent within the formulation evaporates.

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

VINNOL® H 15/42 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic and physically drying binder undergoes film formation as the solvent present in the formulation evaporates.

VINNAPAS® B 100/20 VLE is an approximately 50% solution of a vinyl acetate/vinyl laurate copolymer in ethyl acetate. VINNAPAS® B 100/20 VLE can be diluted with esters, ketones, aromatic solvents, and chlorinated hydrocarbons. The solution's compatibility with alcohol is limited. VINNAPAS® B 100/20 VLE is not compatible with aliphatic compounds.

VINNOL® H 15/50 is a copolymer comprising approximately 85 wt.% vinyl chloride (VC) and 15 wt.% vinyl acetate (VAc). It serves as a binder for surface coating compounds and printing inks. As a thermoplastic and physically drying binder, VINNOL® H 15/50 creates a film as the solvent in the formulation evaporates.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

VINNOL® H 14/36 is a copolymer consisting of approximately 86 wt.% vinyl chloride (VC) and 14 wt.% vinyl acetate (VAc). Its primary application is as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physical drying process, forming a film as the solvent contained in the formulation evaporates.

VINNAPAS® EP 8010 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers. This dispersion offers high adhesion on surfaces that are typically difficult to bond, such as polystyrene and polyester, as well as UV lacquers and others. Additionally, it provides an excellent balance between high adhesion and heat resistance in the glue line.

VINNAPAS® B 60 FG is a solid, thermoplastic homopolymer. The clear and colorless resin is prepared by the polymerization of vinyl acetate. VINNAPAS® B 60 FG is tasteless. Applications include building and construction adhesives, composites and molding, do-it-yourself, industrial adhesives, industrial coatings, and resin modification.

Nail Polisher

Casamid™ 831 is a co-solvent thermoplastic polyamide resin designed for use in gravure inks and lacquers. CASAMID 831 is the highest viscosity grade of the standard range of CASAMID non- reactive polyamide resins. The composition of CASAMID 831 is similar to that approved under FDA 175.320-"Resinous and polymeric coatings for polyolefin films."

LumiSetTM LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241P should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241P is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. Adding cellulosic film formers to this neat polyurethane resin increases the tack free dry time to acceptable nail lacquer dry times of two minutes or less.

FloraRez® 785 is a glycerol ester derived from highly hydrogenated gum rosin. This thermoplastic resin exhibits a very pale color and demonstrates remarkable resistance to oxidation and color degradation. It serves as a valuable tackifying resin component in diverse applications such as adhesives, inks, coatings, and personal care formulations, particularly in scenarios where oxidative stability is essential.

Nail Polisher

FloraRez® DR115 polymerized rosin is produced by the partial dimerization of gum rosin. This catalytic polymerization process results in an elevated softening point while maintaining the acid functionality of rosin. This resin is pale, thermoplastic, crystallization-resistant, and less prone to oxidation than unmodified rosin. The high acid functionality promotes specific adhesion to a variety of substrates.

POLYCHEM® 7563-V-60 is a vinyl toluene copolymer designed for use in primers, enamels, aerosols, and sanding sealers where lacquer type dry is required. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP). It's applications lie in areas like equipment enamels and floor seals.

LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance, gloss, and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, gloss, and hydrophobicity offers formulators an alternative to reachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241 should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241 is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators.

FloraRez® 485 is a high-quality glycerol ester derived from partially hydrogenated gum rosin that has undergone purification to ensure exceptional taste and odor characteristics. It is meticulously protected from contaminants. This pale-colored thermoplastic resin possesses a low acid number. In numerous countries, it is considered suitable for incorporation into chewing gum bases as an ingredient. Additionally, it serves as a resin component in a wide range of applications, including adhesives, inks, coatings, and personal care formulations, where oxidative stability is needed.

Casamid™ 833 is a co-solvent thermoplastic polyamide resin designed for use in packaging inks and lacquers. Compared to Casamid™ 831, Casamid™ 833 has much improved solubility characteristics, compatibility with nitrocellulose and greater tolerance to alcohol and polar solvents.

Casamid™ 843W is an alcohol reducible thermoplastic resin containing wax for specialist applications.

FloraRez® DR95 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with an elevated softening point while still maintaining the acid functionality of rosin. FloraRez® DR95 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to various substrates.

Linseed Oil is obtained from the mature seeds of the flax plant, which belongs to the Linaceae family.

FloraRez® DR140 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with a high dimeric acid content and a very high softening point, while still maintaining the acid functionality of rosin. FloraRez® DR140 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to a wide range of substrates.

LumiSet TM LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. A non-reactive alternative version of LSR-141 is available as LSR-141N.

PROPOLDER™ FPP4060 is polypropylene (PP) homopolymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ homopolymer PP materials are pure polypropylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements.

Casamid™ 872 is a medium viscosity alcohol soluble polyamide resin for use in flexographic inks and lacquers, where water resistance is less important.

FloraRez® G85 is the glycerol ester of gum rosin, which is also known as ester gum. It is a pale-colored thermoplastic resin that has a low odor and low acid number. FloraRez® G85 is commonly used as a resin component in various adhesives, inks, coatings, and personal care compositions.

POLYTONE™ AP 108 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

Guangxi Zhongchang Resin RGM128W is a maleic modified glycerine ester of gum rosin. designed to provide aliphatic compatibility in ink or oil paint formulations. The good solubility makes it a good co-resin to adjust solubility parameters in a wide variety of lithographic ink and varnish applications. It is an excellent pigment wetting resin and is recommended for use in economical flushing varnishes for heatset and sheetfed flushes.

Dromide® 933 is a co-solvent soluble polyamide resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints.