Products in Other Resins & Binders: Asphalt

Rovene 4310 is a medium soft carboxylated styrene-butadiene emulsion designed for formulation of general purpose labels and construction adhesives. It is used in the formulation of general purpose labels and construction adhesives which provide excellent adhesion to a variety of substrates. Rovene 4310 has compatibility with a wide variety of commercial tackifier resins and has excellent filler tolerance.

Rovene 4220 is a non-carboxylated styrene-butadiene emulsion recommended for use in formulations directed at contact or cold seal applications. Rovene 4220 can also be used in architectural adhesives including many types of flooring adhesives and special contact adhesives. Rovene 4220 can be used as a polychloroprene and natural latex extender if properly formulated. When working with Rovene 4220, it is important to remember that it may be tackified, thickened and blended with other non- carboxylated and carboxylated emulsions. This flexibility allows for the formulation of a wide variety of adhesives with custom performance properties.

Rovene 4125 is a styrene-butadiene emulsion polymer recommended for applications where a primer-sealer that provides adhesion between asphalt and other various surface treatments is needed. Rovene 4125 has been used in recreational surface applications such as tennis court and running track coatings.

Rovene 5044 is a very soft carboxylated styrene-butadiene emulsion designed for formulation of permanent label and construction adhesives. It is used in the formulation of permanent label and construction adhesives which are high in peel and tack, and thus require a minimum amount of tackifier. Rovene 5044 was designed to give excellent performance and compatibility with a wide variety of tackifiers.

Rovene 4180 is a low VOC styrene-butadiene emulsion polymer that provides the ability to compound at high solids and in multiple application areas. It is recommended for use in automobile underbody and protective coatings, landscaping mulch coatings, paper saturation, laminations, water resistance coatings, and specialty nonwoven/textile applications.

BarrierPro 4551 is a carboxylated styrene-butadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro 4551 is also a good base polymer for blending with other BarrierPro products to allow a membrane to be custom tailored to a specific strength and/or flexibility need.

BarrierPro 4550 is a general purpose styrene-butadiene emulsion polymer of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as water proofing membranes, specialty paints and sealants.

BarrierPro 4555 is a styrene-butadiene emulsion polymer of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for water proofing where films must remain flexible at below-freezing temperatures. Features: Highly stable Cured films are tough and flexible below freezing temperatures Cured films have good water resistance Hydrolysis resistant Filler compatible

Norst® PB-500 is Particulate for thermoplastic applications. It is odorless and highly stable.

Fushun Huaxing Petroleum Chemical HX-C9 120 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

Fushun Huaxing Petroleum Chemical HX-C9 140 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

HIGREE™ CL1104 C5 hydrocarbon resin is a low molecular weight, narrow molecular distribution, light color thermoplastic resin produced from aliphatic petroleum-derived monomers .With good infinity with a wild range of polymers. Due to its good tack and cohesive ,it is a good tackifier for hot melt adhesives and pressure sensitive tapes.

Tirecycle™ MBS-800 is Particulate for thermoplastic applications. An upcycled, rejuvenated crumb rubber. It is impermeable to water or oxygen. It has good tensile strength, excellent aging/weather resistance, low stain, low electrical conductivity. It is odorless and highly stable.

HIGREE™ CL1102 is an aliphatic hydrocarbon resin specially designed as a binder for thermoplastic road marking formulations. It is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha.This grade of resin shows outstanding affinity with pigments and good flow-ablity and weatherability in thermoplastic road marking application.

Fushun Huaxing Petroleum Chemical HX-C9 100 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

Fushun Huaxing Petroleum Chemical HX-C9 110 is produced through the process of fractionation, thermal polymerization, flash evaporation and molding with the carbon nine as the raw material from ethylene fragmentation. This product is light yellow-brown granules, flakes or bulk solids with better transparency, gloss, compatibility, dissolvability of water, insulation, and excellent solubility and stability to the acid-base chemicals, and good bond and good thermal conductivity and so on.

Norst® PB-800 is Particulate for thermoplastic applications. It is odorless and highly stable.

Norst® B-1620 is Particulate for thermoplastic applications. It is odorless and highly stable.

HIGREE™ CL100 hydrocarbon resin is a low molecular weight,light color thermoplastic resin produced from aliphatic petroleum-derived monomers .With good infinity with a wild range of fillers ,it is not only wildly used for tires but also road marking paint .Becaused of good tack and cohesive ,it is also a better choice for hot melt adhesive and pressure sensitive tape.