Products in Other Resins & Binders: Steel

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

VINNAPAS® EP 6300 is a high-solids vinyl acetate-ethylene (VAE) copolymer dispersion with carboxylation. It has a glass transition temperature (Tg) of 0°C. This dispersion exhibits excellent adhesion to films and metals, and it also offers impressive cohesive film strength. Furthermore, it has the ability to be crosslinked.

Dynasylan® SIVO 110 stands as a versatile, virtually VOC-free, water-borne sol-gel system. It integrates organofunctional silanes with nanoscale SiO2 particles. This product, available as an opaque to milky, colorless to slightly yellow, low-viscosity liquid, can be diluted in water and common organic solvents. Dynasylan® SIVO 110 features reactive silanol groups and Si-bonded epoxy-based organic functionalities.

Dynasylan® SIVO 160 presents a water-borne, storage-stable silane-based sol-gel system engineered for formulating inorganic surface treatment primers. A part of the SIVO® SOL Technology, it inherits the benefits of its established series counterparts by excluding heavy metals, fluorides, and solvents. Designed for minimal volatile organic content, its polymeric nature endows it with high reactivity. This is highlighted by its remarkably low curing temperature range of 20 to 80 °C, a significant advancement for water-borne sol-gel systems. Dynasylan® SIVO 160, appearing as a clear to slightly opaque, colorless to slightly yellow, low-viscosity liquid, offers versatile utility.

AGC Chemicals Americas, Inc. LUMIFLON® LF-200F is a moderate molecular weight, moderate hydroxyl number resin consisting of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). This product has been developed in flake form in order to enable formulators to meet VOC and HAPS regulations. This resin can be dissolved in VOC and HAPS exempt solvents such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate to meet the strictest air quality requirements. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

AGC Chemicals Americas, Inc. LUMIFLON® LF-916F is a low molecular weight resin that is used to create coatings with high crosslink density. This resin is made of alternating fluoroethylene and alkyl vinyl ether segments (FEVE) and comes in flake form to comply with regulations for VOC and HAPS. It can be dissolved in solvents that are exempt from these regulations, such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate. These resins are used to produce coatings that are highly resistant to weathering, and are commonly used in various industries like architecture, aerospace, automotive and industrial maintenance.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-081 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE ZH-885B is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as hard coat, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-521N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-885C is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2150 is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as low-melt ETFE, smooth surface, non-adhesive, semi-commercial coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-8820X is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-520N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and 20% carbon fiber undercoat. Various powder grades are available for different processing methods and application needs.

Yuron New Material Chlorinated Rubber(CR)-20 is a good resistance to chemicals and atmosphere and good compatibility with many resins and plasticizers. It finds applications in many industrial fields, such as anti-corrosive paint / marine paint / flame-retardant paint / road marking paint / adhesive. It is available in various viscosity grades. All grades are free from carbon tetrachloride (CTC).

Yuron New Material Chlorinated Rubber(CR)-400 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

SiliXan® W 220 is epoxy modified polymer based on nanoscaled silicon dioxide used as binder or as additive in epoxy, melamine resin or blocked isocyanate systems. Formulations based on SiliXan W 220 improve the abrasion resistance and protect against corrosion on steel or on aluminum.

Yuron New Material Chlorinated Rubber(CR)-90 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

Jiangsu Liside Chemical plant VC Copolymer MP15 resin is a chlorinated binder that is used for the manufacturer of physically drying coatings on iron and steel, non-ferrous metal, mineral substrates as well as road marking paints resistant to hydrolysis.

Yuron New Material Chlorinated Rubber(CR)-130 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

Puyang Ruicheng Chemical DCPD petroleum resin RC-D120 is the pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated dicyclopentadiene derived from a special process, at a certain temperature and pressure, formed by the polymerization of low molecular weight polymer. D120 has a good compatibility with ester and polyurethane solvents. In the ester solvent, it has a good compatibility with epoxy resin, furthermore it has a good curing speed with epoxy resin .It can be used as the modifier for the marine paints and some other special paint as well as the shrinkage force to the cement and steel, furthermore, it also can strengthen the wetting property to paint and improve the leveling property of paint film.

Chloride Vinyl Copolymer Resin CMP15 are copolymers of vinyl chloride and vinyl isobutyl ether. They can be used as base resin for air-drying paints or other physical drying paints.

SiliXan® W 300 is epoxy modified polymer based on nanoscaled silicon dioxide used as binder or as additive in epoxy, melamine resin or blocked isocyanate systems. Formulations based on SiliXan W 300 improve the abrasion resistance and protect against corrosion on steel or on aluminum.

SiliXan® U 310 E - 50/PM is urethane polymer with silicon ethoxy groups used as binder for the formulation of high quality UV stable clearcoats or pigmented coatings. The material shows good adhesion on metals like aluminum or stainless steel. For application on plastic like PC, PC-ABS or PMMA an adhesion primer is required.

Yuron New Material Chlorinated Rubber(CR)-22 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

x-bond® T 9027 is a condensed silane in alcohol based binder. Exhibits high temperature stability, good abrasion and corrosion resistance. It is a transparent, inorganic-organic sol-gel material which catalyzes the degradation of organic compounds at high temperatures. It is free of fluorine and other halogens. Applications in temperature stable easy-to-clean coatings and paint coatings. Typical substrates are stainless steel, aluminum, glass or ceramic. Also suitable for surfaces in food contact. Suited for formulation of spray, dip and brush-on paints as well as for coatings used in roller application.

Yuron New Material Chlorinated Rubber(CR)-40 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

Yuron New Material Chlorinated Rubber(CR)-170 can be used as an adhesive to bind many kinds of rubber (NR，IR，IIR, SBR, EPDM, CR, NBR ,CM) with metals (steel, brass, aluminum). The most popular products for such applications are YURON CR-130 and YURON CR-170 which are available in various viscosity grades which are free from carbon tetrachloride (CTC).

x-bond® T 9070 is a condensed silane in alcohol based binder. Exhibits high temperature stability, good abrasion and corrosion resistance. It is a transparent, inorganic-organic sol-gel material which catalyzes the degradation of organic compounds at high temperatures. It is free of fluorine and other halogens. Applications in temperature stable catalytic coatings and tarnish protection. Typical substrates are stainless steel, aluminum, glass or ceramic. Also suitable for surfaces in food contact. Suited for formulation of spray, dip and brush-on paints as well as for coatings used in roller application.

Jiangsu Liside Chemical plant VC Copolymer MP35 resin is a chlorinated binder that is used for the manufacturer of physically drying coatings on iron and steel, non-ferrous metal, mineral substrates as well as road marking paints resistant to hydrolysis.

SiliXan® W 120 is epoxy modified polymer based on nanoscaled silicon dioxide used as binder or as additive in epoxy, melamine resin or blocked isocyanate systems. Formulations based on SiliXan W 120 improve the abrasion resistance and protect against corrosion on steel or on aluminum.

Yuron New Material Chlorinated Rubber(CR)-10 is a good resistance to chemicals and atmosphere and good compatibility with many resins and plasticizers. It finds applications in many industrial fields, such as anti-corrosive paint / marine paint / flame-retardant paint / road marking paint / adhesive. It is available in various viscosity grades. All grades are free from carbon tetrachloride (CTC).

Yuron New Material Chlorinated Rubber(CR)-5 has a good resistance to chemicals and atmosphere and good compatibility with many resins and plasticizers. It finds applications in many industrial fields, such as anti-corrosive paint / marine paint / flame-retardant paint / road marking paint / adhesive. It is available in various viscosity grades. All grades are free from carbon tetrachloride (CTC).

Jiangsu Liside Chemical plant VC Copolymer MP25 resin is a chlorinated binder that is used for the manufacturer of physically drying coatings on iron and steel, non-ferrous metal, mineral substrates as well as road marking paints resistant to hydrolysis.

Jiangsu Liside Chemical plant VC Copolymer MP60 resin is a chlorinated binder that is used for the manufacturer of physically drying coatings on iron and steel, non-ferrous metal, mineral substrates as well as road marking paints resistant to hydrolysis.