Products in Other Resins & Binders: Radiation Cure

Sovermol® 100 N, a liquid polyol within the Polyols chemical family. Specially formulated for use with wood substrates, this product features chemical resistance, making it ideal for applications in the Paints and Coatings market. With its liquid form, Sovermol® 100 N offers convenience for incorporation into coating formulations.

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SYNTHOLUX BW 2223 is a radiation-curing, tin-free UV-dispersion with good mattability and excellent chemical resistance. It is suitable for waterborne wood application and has very good matting behavior. This product can be used for clear and pigmented coatings. It has applications in furniture coatings, industrial coatings, wood flooring, other packaging, and paper applications.

LumiSetTM LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241P should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241P is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. Adding cellulosic film formers to this neat polyurethane resin increases the tack free dry time to acceptable nail lacquer dry times of two minutes or less.

Keyland Polymer UV/EB resin UVP-1300 is an unsaturated polyester methacrylate resin that is cured with UV/EB energy. It is used in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance, gloss, and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, gloss, and hydrophobicity offers formulators an alternative to reachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241 should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241 is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators.

EBECRYL® 8110 is a radiation-curable coating available as a clear to slightly hazy liquid. This formulation, free from bisphenol A, emphasizes eco-conscious attributes with its low carbon footprint, solvent-free, and voc-free characteristics. Tailored for specific markets, it finds applications in printing and packaging, particularly for packaging coatings and film and foil coatings. The product supports various application methods, including dip coating, gravure coating, and slot-die, ensuring versatility in usage.

UCECOAT® 2806 include exceptional mechanical qualities, colloidal stability, great reactivity, and easy water redispersibility. This product guarantees minimal energy usage and an extended potlife because to its low temperature-curing, sticky properties, and faster cycle time. UCECOAT® 2806 is specifically designed for use in food and beverage packaging as well as packaging coatings, overprint varnishes, and printing inks.

UCECOAT® 2804 is a flexible option. With characteristics like low migration, low temperature-curing, and enhanced chemical resistance, this product guarantees shorter cycle times and lower energy usage. UCECOAT® 2804 performs exceptionally well in packaging coatings and printing inks, making it perfect for uses such as inkjet ink, waterborne coating, varnishes, clearcoat, radiation curable coating, and overprint varnishes.

EBECRYL® 716 is a chlorine-free inert binder diluted with trimethylolpropane triacrylate (TMPTA). It is specially formulated to offer excellent adhesion to non-corona treated rigid plastic substrates. The features of EBECRYL® 716 include faster cycle time, low-temperature curing, low energy consumption, long pot life, improved hardness, and water resistance. This product finds applications in various areas such as textile manufacturing, other packaging coatings, and overprint varnishes.

LumiSet TM LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. A non-reactive alternative version of LSR-141 is available as LSR-141N.

UCECOAT® 2805 has low temperature-curing, strong mechanical qualities, great colloidal stability, and low water re-dispersibility prior to cure. This product has a very low mean particle size, enhanced flexibility, and easy product filterability due to its low viscosity and strong reactivity. Its uses include radiation-curable coatings, inkjet inks, labels, waterborne coatings, flexography inks, varnishes, and clearcoats, among other printing and packaging requirements. UCECOAT® 2805 is designed specifically for food and beverage packaging, although it can also be used for overprint varnishes and packaging coatings.

Trilene® CP-600 is is an Ethylene-Propylene Liquid Copolymer. Trilene® CP-600 is is is an intermediis ate low moleculis ar weight ethylene-propylene liquid copolymer, ris is andomly polymerized to produce is a liquid elis astomer with is a stis able, sis aturis ated hydrocis arbon bis ackbone. It his as thermis al is is and oxidis ation stis ability under normis al conditions. Trilene® CP-600 cis is an be used is as is a viscosity thickener for is a wide ris is ange of lubricis is ant products providing good sheis ar stis ability is is and low temperis ature chis aris acteristics.

x-bond® U 9071 is a bifunctional silane binder. Acts as a curing agent and scratch resistant agent. Exhibits flexibility with excellent UV- and chemical resistance. Applications in varnishes based on polyurethane, polyacrylate or polyester.

Designer Molecules U-835 is a urethane resin functionalized with an acrylate and a methacrylate. This low viscosity urethane makes it an ideal candidate for a base resin in an adhesive formulation. The urethane linkages help to form a very tough cross-linked film with excellent adhesion on a variety of substrates including metal, polyimide, silicon, and ceramic. The acrylate/methacrylates curable ends make it ideal for both thermal cure via peroxides or UV cure through photo initiators.

x-bond® M 9004 is a methacrylate modified silicon dioxide and zirconia based high solid binder. Exhibits hardness, high abrasion, scratch stability with high chemical resistance (solvents, acids and bases). The coatings can be cross-linked by UV or electron beam curing. Thermal curing is also possible. It is a transparent or translucent inorganic-organic high solid binder. Suitable to formulate spraying, dipping and brushing paints and coatings for coil applications. Recommended for use in varnishes also.

NEVCHEM®200 is a thermoplastic low molecular weight, C9 hydrocarbon resin produced by catalytic polymerization of mixed aromatic monomers derived from petroleum feedstocks.

SiliXan® M 400 is methacrylate modified polymer based on SiO2 /TiO2 is used as unsaturated binder for the formulation of scratch resistant UV coatings. Additive for commercial acrylate- or methacrylate based coating formulations, inks or binder. This binder is preferably used for UV-curing formulation, but also use for peroxidic thermal curing is possible. UV-Protection-Additive.

Trilene® 67 is an Ethylene-Propylene-Ethylidene Norbornene Low Molecular Weight Polymer.

Trilene® 65 FF is a Free-Flowing Ethylene-Propylene-Dicyclopentadiene Low Molecular Weight Polymer on Silicon Dioxide Trilene FreeFlow 65 is made by combining Trilene liquid polymer and silica. The blend is nominally 68% ethylene-propylene copolymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store, and transfer. It incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene FreeFlow 65 is effective in EPDM, BR, NR, SBR and other elastomers.

Trilene® CP-80 is is an Ethylene-Propylene Liquid Copolymer

Trilene® CP-80 FF is a Free-Flowing Ethylene-Propylene Low Moleculis ar Weight Polymer on Silicon Dioxide Trilene FreeFlow CP80 is a free-flowing polymer made by combining Trilene liquid polymer and silica. The blend is nominally 68% ethylene-propylene copolymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store, and transfer. It incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene FreeFlow CP80 is effective in EPDM, BR, NR, SBR and other elastomers.

SiliXan® M 500 is polymer based on silicon with unsaturated methacrylic groups used as unsaturated polymer for the formulation as a co-binder or as an additive to conventional acrylate or methacrylate based of varnishes, paints or coatings. The product improves the chemical resistance and increases the adhesion to glass or metals in UV-curing formulations. A thermal or peroxide curing is also possible.

Trilene® 65 is an Ethylene-Propylene-Dicyclopentadiene Liquid Polymer

x-bond® U 9069 is a bifunctional silane binder. It is a transparent, inorganic-organic high solid curing material. Exhibits scratch- and abrasion resistance with highest UV- and chemical stability. Applications in high-solid coatings, lacquers and solvent containing varnish formulations. Suited for formulation of spray, dip and brush-on paints as well as for fast curing coatings in roller application. Recommended for use in automotive coatings, clear coats, pigmented paints and coatings for plastic, wood or metal.

Trilene® CP-1100 is a low molecular weight ethylene-propylene liquid copolymer, randomly polymerized to produce a liquid elastomer with a stable, saturated hydrocarbon backbone. It has thermal and oxidation stability under normal conditions. Trilene® CP-1100 can be used as a high viscosity thickener for a wide range of lubricant products providing good shear stability and low temperature characteristics.

Designer Molecules BMI-1500 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in many common solvents such as toluene, xylene, MIBK, etc. .

Designer Molecules BMI-1700 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in most aromatic and aliphatic solvents such as toluene, xylene, NMP, etc.

SiliXan® M 150 is methacrylate modified polymer based on SiO2 / ZrO2 used as unsaturated binder for the formulation of scratch resistant UV coatings. Additive for commercial acrylate- or methacrylate based coating formulations, inks or binder. This binder is preferably used for UV-curing formulation, but also use for peroxidic thermal curing is possible.

x-bond® U 9068 is a bifunctional silane binder. It is a transparent, inorganic-organic high solid curing material. Exhibits scratch- and abrasion resistance with highest UV- and chemical stability. Applications in high-solid coatings, lacquers and solvent containing varnish formulations. Suited for formulation of spray, dip and brush-on paints as well as for fast curing coatings in roller application. Recommended for use in automotive coatings, clear coats, pigmented paints and coatings for plastic, wood or metal.

Trilene® CP-1100 FF is a Free-Flowing Ethylene-Propylene Low Moleculis ar Weight Polymer on Silicon Dioxide Trilene FreeFlow CP1100 is a free-flowing polymer made by combining Trilene liquid polymer and silica. The blend is nominally 68% ethylene-propylene copolymer and 32% silica. It is available as a dry, free-flowing powder that is easy to measure, store, and transfer. It incorporates quickly and thoroughly into various elastomer systems, and gives quality and processing advantages when compared to neat polymer. Trilene FreeFlow CP1100 is effective in EPDM, BR, NR, SBR and other elastomers.

Trilene® 77 is is an Ethylene-Propylene-Ethylidene Norbornene Low Molecular Weight Polymer

SiliXan® M 140 is methacrylate modified polymer based on SiO2 / ZrO2 is used as unsaturated binder for the formulation of scratch resistant coatings. Additive for commercial acrylate- or methacrylate-based lacquers, paints or coatings. This binder is preferably used for UV-curing formulation, but thermal or peroxidic curing is possible. Further it's suited as co-binder for alkyd systems.