Products in Other Resins & Binders: Flexography Ink

InkRes® 33 is a film forming polysaccharide resin used for partial replacement of acrylic emulsion resins in water-based flexographic ink formulations to improve press resolubility and stability.

Casamid™ 873 is a general purpose low odor alcohol soluble polyamide resin for flexographic packaging inks. Optimum performance requires higher levels of nitro cellulose than Casamid™ 874.

Casamid™ 879 is a general purpose, alcohol soluble, thermoplastic polyamide resin for flexographic packaging inks.

Casamid™ 833 is a co-solvent thermoplastic polyamide resin designed for use in packaging inks and lacquers. Compared to Casamid™ 831, Casamid™ 833 has much improved solubility characteristics, compatibility with nitrocellulose and greater tolerance to alcohol and polar solvents.

Casamid™ 878 is an alcohol soluble resin with a higher than normal melting point and exceptionally low odor properties.

Casamid™ 872 is a medium viscosity alcohol soluble polyamide resin for use in flexographic inks and lacquers, where water resistance is less important.

UCECOAT® 2806 include exceptional mechanical qualities, colloidal stability, great reactivity, and easy water redispersibility. This product guarantees minimal energy usage and an extended potlife because to its low temperature-curing, sticky properties, and faster cycle time. UCECOAT® 2806 is specifically designed for use in food and beverage packaging as well as packaging coatings, overprint varnishes, and printing inks.

Casamid™ 1752 is a co-solvent thermoplastic polyamide resin. It is a high viscosity resin similar to our CASAMID 831 but has a slightly lower gel recovery temperature.

Casamid™ 876 is an alcohol soluble polyamide resin designed for use in general purpose flexographic and gravure printing inks. Modification with nitrocellulose is required for optimum performance.

Casamid™ 874 is a general purpose alcohol soluble polyamide resin for flexographic packaging inks. Lower levels of nitro cellulose are required for optimum performance than with Casamid™ 873.

UCECOAT® 2805 has low temperature-curing, strong mechanical qualities, great colloidal stability, and low water re-dispersibility prior to cure. This product has a very low mean particle size, enhanced flexibility, and easy product filterability due to its low viscosity and strong reactivity. Its uses include radiation-curable coatings, inkjet inks, labels, waterborne coatings, flexography inks, varnishes, and clearcoats, among other printing and packaging requirements. UCECOAT® 2805 is designed specifically for food and beverage packaging, although it can also be used for overprint varnishes and packaging coatings.

Disvipol 252 is used in deep freeze, oil resistant, flexo/gravure inks, spirit varnishes, flexographic inks for food wrappers, aniline inks, rust preventive lacquers, road marking & petrol resistant paints and adhesives based on neoprene rubber solution.

Nitrocellulose DLX 5/8 by Nobel NC is a film forming resin having low nitrogen content. It is based on dice wood pulp. Applicable for wood coating including film coatings, primers and spray lacquer and aqueous leather coatings. Nitrocellulose DLX 5/8 is also used in flexographic and gravure inks.

Nitrocellulose DHX 30/50 is a dice wood pulp-based film forming resin by Nobel NC. Possesses good flexibility and high nitrogen content. Provides high tolerance for aromatic diluents. Nitrocellulose DHX 30/50 shows superior compatibility with a wide range of resins. Designed for cardboard & wrapping paper coatings and aqueous, base coats and top coats for leather coating.

Disvimol 102 is used in N. C. lacquers & putty, in vinyl lacquers for gloss & flexo inks.

POLYTONE™ P 141 is a high melting modified Phenolic resin suitable for manufacture of offset printing inks where low body is required.

Dromide® 940 is a co-solvent soluble polyamide resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints.

EcoResin® 5401 is a maleic modified glycerol ester of gum rosin.

UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.

POLYTONE™ P 142 is a high melting modified Phenolic resin suitable for manufacture of letterpress inks, offset printing inks with excellent water repellant properties.

Hydro-Rez™ 5614 A is a fumarated rosin ester that is soluble in alcohol and can be dispersed in water using ammonia or morpholine. The high melting point promotes fast solvent release and good leveling properties, and is compatible with shellac and Manila copal resins. Hydro-Rez 5614 A is recommended for use in solvent or water-based flexographic inks. This resin is also recommended for use in mineral spirit varnishes.

UNI-REZ 2940 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2940 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.

Finomide 1135 is a polyamide resin co-solvent soluble which is high-molecular-weight polymers which feature amide linkages along the molecular chain. It is a solid thermoplastic resin and non-reactive type.

Nitrocellulose DHX 3/5 is a flexible, film forming resin by Nobel NC having high nitrogen content. Provides high tolerance for aromatic diluents. It is based on dice wood pulp. Designed for cardboard & wrapping paper coatings and aqueous, base coats and top coats for leather coating. Nitrocellulose DHX 3/5 shows superior compatibility with a wide range of resins.

POLYTONETM K-97 HH is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

POLYTONE™ PA 351 is an alcohol soluble non reactive polyamide resin in solid form suitable for flexographic printing inks.

POLYTONE™ PA 303 is a polymeric fatty acid based co-solvent grade non reactive polyamide resin in solid form suitable for flexographic and gravure printing inks.

UNI-REZ 147 polyamide resin is an alcohol soluble / co-solvent type resin offering low temperature gel resistance and good compatibility with modifying resins. UNI-REZ 147 polyamide resin offers better blocking and gloss properties than other modified co-solvent types. It has good solvent compatibility, alcohol reducibility and compatibility to nitrocellulose.

Finomide 1130 is a polyamide resin co-solvent soluble which is high-molecular-weight polymers which feature amide linkages along the molecular chain. It is a solid thermoplastic resin and non-reactive type.

POLYTONE™ K-94 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability

Dromide® 933 is a co-solvent soluble polyamide resin suitable for flexographic and gravure printing inks and over printing lacquers, this resin provides good glossy sharp prints.

Tigerlac 5056 are flaked shellacs that are dewaxed and physically decolorized natural resins. The single products differ in the degree of decolorization and yield transparent solutions of different color shade in various solvent systems. Ready for use solutions of the product are available. The Tigerlac 5056 are Flaked Shellac manufacturing process guarantees careful treatment of the natural raw materials (seedlac) upon refining. The final products are high quality materials with excellent binding and film forming properties. They are physiologically harmless and biodegradable.

Finoket 1100 are a Condensation product of cyclohexanone and aldehyde. They are hard resin typically used for improving gloss in flexo and gravure inks, automotive paints, high gloss lacquers, paper inks, wood primers & nail varnishes.

Finganox 4314 is a stabilized and light color rosin-modified unsaturated acid esters, designed for use in .E. type gravure and flexographic inks. It is compatible with nitrocellulose, polyketone resins, shellac and other modifiers commonly used in alcohol based printing inks. Finganox 4314 is also soluble in aqueous ammonia and amines making it suitable for use in water-based flexographic and gravure inks.

POLYTONETM K-96 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability.

Tigerlac 5058 are flaked shellacs that are dewaxed and physically decolorized natural resins. The single products differ in the degree of decolorization and yield transparent solutions of different color shade in various solvent systems. Ready for use solutions of the product are available. The Tigerlac 5058 are Flaked Shellac manufacturing process guarantees careful treatment of the natural raw materials (seedlac) upon refining. The final products are high quality materials with excellent binding and film forming properties. They are physiologically harmless and biodegradable.