Products in Other Resins & Binders: Screen Printing Ink

Trapylen® 187 EAC is a chlorinated polypropylene dissolved in ethyl acetate. It possesses a slightly lower chlorine content compared to the similar Trapylen® 186 EAC but maintains good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 EAC lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Trapylen® 186 X is a medium-chlorinated polypropylene dissolved in xylene. Characterized by a higher chlorine content compared to other grades, it exhibits relatively good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film produced by Trapylen® 186 X boasts high gloss and remarkable chemical and aging resistance. Its primary advantage lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, to a limited extent, polyethylene.

Trapylen® 186 S is a chlorinated polypropylene with a higher chlorine content compared to other Trapylen® grades. It demonstrates good compatibility with other resins and polymers, excellent pigment wetting, and forms a high-gloss, chemically resistant film. The primary merit of Trapylen® 186 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene.

Trapylen® 186 EAC is a chlorinated polypropylene dissolved in ethyl acetate. With a higher chlorine content compared to other Trapylen® grades, it exhibits good compatibility with other resins and polymers, excellent pigment wetting, and results in a high-gloss, chemically resistant film. The main advantage of Trapylen® 186 EAC is its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited.

Trapylen® 187 S is a chlorinated polypropylene characterized by a higher chlorine content compared to other Trapylen® grades. This feature results in good compatibility with other resins and polymers, coupled with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 S lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70 micron, D100 = 150 micron.

BREMAPAL 3000 is applied in flexo, special and screen inks, lacquers, epoxy systems.

NKX-201 NMP FREE presents excellent chemical resistance, resistance and abrasion due to the highest strength of polycarbonates. NKX 201 presents possibilities for wide use, considering its high-brightness and transparency properties as synthetic substrates such as high-gloss topcoats, leather finish, wood coating or printing screen masses and metal applications.

BREMAPAL 3002 has features such as reduced AV, high resistance.

BREMAPAL 2025 is a combination resin for sheet fed-offset with very low varnish viscosity and excellent pigment wetting, hard resin for oil- and alkyd resin based lacquers and screen inks, also suitable for systems "free of aromatic" and pigment pastes. BREMAPAL 2025 a combination resin, very good wetting, extremely low viscous.

BREMAPAL 3005 has a feature of higher melting point.

BREMAPAL 3007 has features such as , higher resistance, offset+security inks.