Products in Acrylics, Acrylates & Methacrylates: Inks

Bomar®BR-930D is a trifunctional, urethane acrylate oligomer which offers high heat distortion temperatures. This product also offers high abrasion resistance, solvent resistance,and durability. BR-930D is perfect for 3D printing applications usingSLA, 3D inkjet,and DLP printers.

Bomar®BR-970H is a low viscosity, difunctional, aliphatic urethane acrylate. BR-970H has high modulus and doesn’t necessarily need to be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970H offers rapid cure and non-yellowing properties where premium performance is required. This oligomer is perfect for 2D and 3D inkjet applications as well for use in Graphic Arts application. This oligomer canalsobe used in electronics, and automotive applications

BR-741D is a low-molecular—weight, difunctional, aliphatic polyester urethane acrylate that can be effectively formulated for adhesion to cold rolled steel, glass, PMMA, PET, PC, and stainless steel. The resulting hard and tough film makes an effective protective glossy coating which will be nonyellowing, abrasion resistant, and have good weatherability. This is the low-viscosity version of BR-741.

BRC-843SD1 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, nonyellowing, protective single-coating that extends the substrates use-life. BRC-843SD1 is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, and medical device.

BOMAR™ BR-970BT is a low molecular weight, difunctional, aliphatic urethane acrylate. BR-970BT can be blended with other oligomers to achieve a balance of toughness and flexibility. BR-970BT offers rapid cure and low yellowing properties where premium performance is required. This material has low skin sensitivity for dental and cosmetic applications.

MechT E35A is a stable dispersion of discrete functionalized carbon nanotubes in urethane dimethacrylate [UDMA], BR-952. The Masterbatch can be used in rigid, high tensile strength SLA, DLP, or jettable resins to provide conductivity and decreased resistivity. When compared to FDM-printed ESD parts, ESD resins produced with MechT E35A can achieve fully isotropic conductivity with high resolution and isotropic mechanical properties.

BR-7432GB, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications such as thermoforming resistant coatings where toughness and flexibility are required. BR-7432GB provides excellent balance of weathering, solvent resistance, tensile strength, and adhesion properties.BR-7432GB is an incredibly tough, elastomeric material with similar mechanical performance to cast urethanes, and can provide excellent impact resistance and weatherability to formulations. BR-7432GB also has low MeHQ for nail gel polish applications.

BR-5541M is a flexible polyether urethane methacrylate oligomer diluted in 20% IBOA with a low modulus, good adhesion to a variety of substrates, and excellent elasticity. The high molecular weight of the backbone structure offers improved elasticity and rebound versus similar high elongation materials. The low modulus of the material allows for a high degree of flexibility comparable to silicone-based materials such as BRS-14320S, but with improved compatibility and surface cure. The compressibility of the material also offers potential usage in gasket and sealing applications.

BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resinswith excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications

BR-7432GI30, an aliphatic polyester urethane diacrylate, formulates into applications requiring adhesion to various substrates and applications where excellent toughness and flexibility are required. The BR-7432GI30 backbone performs very well in extended weatherability studies. Itis an excellent choice for impact and bend resistant coatings, and can act as an impact modifier for composite applications

BR-952 is an aliphatic urethane dimethacrylate. The low viscosity allows for ease of use in coating applications for the nail care and 3D printing industries. BR-952 can be used to provide a high gloss, tough coating or 3D printed part. This material is also used in coatings for construction applications when improved toughness is desired for excellent durability. BR-952 provides an inherently high HDT of 143°C and a Tg of 159°C, and is inherently tin-free

Bomar™ BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired, and can be used as an additive for impact resistance. Resins with less than 1000 cps can be formulated with this material when monomer levels are above 50%.

BR-441BI20 is a fast-curing, high tensile strength, low molecular weight aliphatic polyester urethane acrylate with low color, high hardness, and excellent adhesion to plastic substrates. BR-441BI20 can be considered for use in high tensile strength overprint varnishes, high tensile strength 3D printing resins, and non-yellowing coatings.

BRC-842MB is a difunctional, hydrophobic urethane methacrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. Its ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications.

BR-771F is a low molecular weight oligomer with a good balance of high tensile strength and moderate elongation with an excellent cure speed. BR-771F exhibits excellent adhesion to plastic substrates, particularly polycarbonate. Formulations made with BR-771F can exhibit superior toughness properties with a high Tg. Its inherently low color and aliphatic backbone make BR-771F an excellent candidate for polycarbonate coatings and adhesives

BR-541MB is a difunctional aliphatic polyether urethane methacrylate. BR-541MB is used for its desirable balance of toughness and flexibility and its ability to adhere to a variety of substrates. This oligomer is an excellent candidate to consider for use in impact-resistant coatings on various substrates when used with BR-543MB. This material has low skin sensitivity and is INCI registered for compliance in cosmetic applications

BR-371MS, a low molecular weight, difunctional, aliphatic polyether urethane methacrylate oligomer, is a great fit for coatings that require high tensile strength, extremely low color, superior hardness, scratch resistance, and weathering resistance. BR-371MS provdes very low color and a high viscosity, ideal for hard gel nail coatings, and offers reduced heat generation vs other high tensile strength materials.

bossin® W-102 has a high UV curing activity with no solvents and dilute with 15%TMPTA.

bossin® W-153 has an high UV curing activity with no solvents.

BAMM ISO-BUTYL ACRYLATE is used in the production of coatings, elastomers, adhesives, thickeners, surfactants, fibers, plastics, textiles and inks.

BAMM 2-ETHYLHEXYL ACRYLATE is used in the production of coatings and inks, adhesives, sealants, plastics and elastomers.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

bossin® W-123 has a high UV curing activity with no solvents and dilute with 20%TPGDA.

BAMM METHYL ACRYLATE is a colorless liquid with an acrid odor. It is used in the production of coatings, elastomers, adhesives, thickeners, surfactants, fibers, plastics, textiles and inks.

bossin® W-21 improves the curing rate the formula and decrease the dosage of photoinitiator in color formula.

bossin® W-100 has a high UV curing activity with no solvents.

bossin® W-02 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic.

BAMM ETHYL ACRYLATE is used in the production of coatings and inks, adhesives, sealants, plastics and elastomers.

bossin® W-100M has a high UV curing activity with no solvents.

bossin® W-39 is a mono- functional, existence of rigid rod structure urethane groups and flexible carbon chain. Compare with other mono-functional monomer, the features have low viscosity, good flexibility, curing fast and low volatility.

bossin® W-106 is a suitable pigment for dispersion, flexibility and biological degradation.

BAMM N-BUTYL ACRYLATE is a colorless volatile liquid with an acrid odor. It is used in the production of coatings, elastomers, adhesives, thickeners, surfactants, fibers, plastics, textiles and inks.

bossin® W-33 has excellent properties in curing, fast, heat resistance, low shrinkage and low irritation.

BAMM TERT-BUTYL ACRYLATE is used in the production of coatings, adhesives, fibers, plastics, textiles and inks.

bossin® W-21Cimproves the curing rate the formula and decrease the dosage of photoinitiator in color formula.