Products in Monomers & Oligomers: Polyurethane Foams

Eternal Materials 2040M is polyester for polyurethane foam.

Sehotech SP-240P is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

EXAFLEX 3056 is a propylene oxide and ethylene oxide based trifunctional polyol, with an ethylene oxide end capping. It is made to be used to produce flexible PU slabstock foam on continuous line as well as on batch block.

AFEX™ TG23C is a base drying Oil called as Tung having three conjugated double bonds.

WJESPOL 2301 is used for general purpose (Panel, Spray etc)

EXAPOL SU 461 B is high functionality sucrose – glycerin based polyether polyol. Due to it’s high viscosity, it can be formulated to give very one cell structure rigid polyurethane foam of higher compressive strength. It is designed to give improved cyclopentane solubility.

PolyGreen Chemicals F7020 is for the use in Polyurethane applications. F7020 preferred to use in low density foams with high hardness, depending on formulation may save on TDI consumption.

Rokopol® M5020 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-38 mgKOH/g, and dynamic viscosity within the range of 700-1000 mPas at temp. 25°C

WJESPOL 1201 is used to improve adhesion

BioPolyol TT is a bio based polyol mainly for rigid polyurethane foam production. For rigid foam production this polyol is used in mixture with cross-linking polyols whose functionality is at least five. Our suggested ratio between Bio Polyol TT and cross-linking polyol is approx. 80:20 by mass. Polyol is synthesized from tall oil. It contains primary hydroxyl functional groups and tertiary amine groups. This polyol is catalytically more active and can be used for spraying PUR formulations. Polyol is difunctional and Natural Oil Based with estimated bio carbon content ~ 70 %.

Rokopol® M5000 is a polyether polyol produced in the KOH technology. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 33-35 mgKOH/g and dynamic viscosity within the range of 700-960 mPas at temp. 25°C.

Rokopol® iCan 4100 is a specialized, base polyether polyol dedicated to production of winter, assembly one-component foams (OCF). It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 150-165 mgKOH/g, and dynamic viscosity within the range of 200-350 mPas at temp. 25°C.

AFEX™ CR20C is a base drying oil called as Corn having no double bond.

Sehotech SP-200 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

EXAPOL SU 440 N/1 is sucrose – glycerine based polyether polyol of moderate functionality and low viscosity.

CA - 4020U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

CA - 4010U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

Sehotech SP-150 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

WJESPOL 1100 is used improve adhesion

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

EXAPOL G 375 is a glycerin based trifunctional polyol of low viscosity and low hydroxyl value.

AFEX™ CN20C is a base drying oil called as Canola having no double bond.

PETOL® 400-3 is a propoxylated glycerol, low viscosity polyether polyol triol with an average molecular weight of 440.

CA - 4030U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

EXAPOL SU 280 is sucrose sorbitol – glycerin based polyether polyol of high functionality but low hydroxyl value and low viscosity.

CA - 5010 U is Applied In PU Foam, Intergral Skin, TPU.

WJESPOL 1200 is adhesive for EPS Panel

EXAPOL SU 465 is a medium viscosity and moderate functionality sucrose – glycerin based polyether polyol. This is a general purpose polyol

AFEX™ SB20C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

PETOL® 250-3 is a propoxylated glycerol, polyether polyol triol with an average molecular weight of 670.

PETOL® 250-2 is a high purity polyoxypropylene glycol, homopolymer diol with an average molecular weight of 450, non-acidified quality.

CA - 2430 U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

AFEX™ CN30C is a base drying oil called as Canola having no double bond.