Products in Monomers & Oligomers: Acrylics & Acrylates

CE CRYL 800T is a 80% Epoxy Acrylate Oligomer with 20% monomer (TPGDA) .

Photomer® 4361 is an ethoxylated analog of 1,6-hexanediol diacrylate (Photomer® 4017). It is a very low irritation monomer which can be substituted for HDDA due to its comparable solvency characteristics. This monomer can be used as a high performance diluent in UV/EB energy curable coatings and inks.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

bossin® W-106 is a suitable pigment for dispersion, flexibility and biological degradation.

BAMM N-BUTYL ACRYLATE is a colorless volatile liquid with an acrid odor. It is used in the production of coatings, elastomers, adhesives, thickeners, surfactants, fibers, plastics, textiles and inks.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

PHOTOMER® 4142 (THFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. It is typically used in UVand EB curable applications. Photomer 4142 offers good flexibility and toughness, low Tg and excellent solvency.

MM-304 is a liquid mono-functional methacrylate monomer. It has similar properties as Isobornyl Methacrylate (IBOMA) when polymerized but with lower weight loss on cure. It has a mild, pleasant odor. MM-304 has good resistance to hydrolysis.

Guangzhou Chemical 2-Hydroxy Propyl Acrylate can be used in a variety of ways to produce resins that are useful in high performance coating applications. Using typical methods for the polymerization of ethylenically unsaturated monomers, hydroxypropyl acrylate (HPA) can be used to attach hydroxyl groups to an acrylic polymer backbone. The pendant hydroxyl groups can then act as sites for reaction with a variety of cross-linking agents. HPA allows faster curing cycles and/or reduced baking temperatures, compared with hydroxyalkyl methacrylates. Also HPA can be formulated at higher solids in coating applications.

Photomer® 4158 is a high molecular weight analog of ethoxylated TMPTA (Photomer® 4149). Because of its increased ethoxylate content, Photomer® 4158 exhibits greater hydrophilic characteristics than unmodified acrylate polyols and will provide an excellent starting point for developing water dispersible UV/EB curable inks and coatings.

bossin® W-39 is a mono- functional, existence of rigid rod structure urethane groups and flexible carbon chain. Compare with other mono-functional monomer, the features have low viscosity, good flexibility, curing fast and low volatility.

CE CRYL 1000 is a 100% Epoxy Acrylate Oligomer.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

PHOTOMER® 4141 (CTFA) is a low viscosity mono-functional acrylated monomer which can be polymerised in the presence of free radicals. This Cyclic Trimethylolpropane Formal Acrylate (CTFA) is typically used in UV and EB curable applications. PHOTOMER® 4141 offers good solvency and very good adhesion properties on metals and plastics.

PHOTOMER® 4356 is a tri-functional acrylated monomer which can be polymerised in the presence of free radicals. This monomer is typically designed for use in UV- and EB curable applications. PHOTOMER® 4356 offers high reactivity, high cross linking density and excellent scratch, abrasion water and chemical resistance and good heat resistance combined with low shrinkage properties and none yellowing properties

UVP 0102 99 is a clear liquid with low viscosity and good solvency.

CE CRYL DPGDA is a Dipropylene Glycol Diacrylate Monomer.

PL-3230 Tricyclodecane dimethanol diacrylate is a difunctional monomer that provides low shrinkage and excellent hardness.

PHOTOMER® 4050 is an aliphatic difunctional acrylate of low viscosity, low volatility, good flexibility and reactivity. It is an effective reactive diluent with good viscosity reducing and solvency characteristics for a wide range of radiation curable acrylated oligomers and prepolymers.

UVP 0104 99 is a clear liquid with low viscosity and good solvency.

bossin® W-33 has excellent properties in curing, fast, heat resistance, low shrinkage and low irritation.

Photomer® 4071 is a low viscosity and low odor diluent for UV and EB radiation curable varnishes and pigmented coatings like inks as well as for UV inkjet applications.

PHOTOMER® 4808 is a low viscosity, monofunctional acrylated monomer/reactive diluent, for use in radical initiated UV radiation cured coatings, inks and adhesives. PHOTOMER® 4808 has a hydrophobic backbone and exhibits good flexibility and excellent adhesion on non-polar substrates.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

CE CRYL HDDA is a Hexane-diol Diacrylate Monomer.

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

CE CRYL 800 is a 80% Epoxy Acrylate Oligomer with 20% monomer (DPGDA).

Photomer® 4035 is a monofunctional aromatic acrylate of low viscosity, moderate odor and good cure speed. Due to the Monofunctional character of its backbone, it has been found useful as a flexibilizer and as an adhesion promoter. Photomer® 4035 is recommended for use in UV/EB curable screen, flexographic inks, clear coatings and lacquers.

FONTAINE SHAN Dipentaerythritol Hexaacrylate DPHA is a product of di-pentaerythritol acrylated with high functionality about 5. DPHA is used with very high crosslink density and high reactivity and it is widely used in formulation for performance with tough requirements of hardness and scratch resisitance. As it has relatively high viscosity, DPHA could be use as an oligomer in formulation instead of a monomer.

PHOTOMER® 4600 is a medium viscosity mixture of penta-acrylate and hexa-acrylate monomer for UV/EB curable coatings and inks on paper, foil, wood and plastic substrates. It imparts excellent abrasion and scratch resistance as well as fast cure response when formulated into UV/EB curable applications.

PHOTOMER® 4810 is used as mono functional monomer used as a flexibilizing agent in UV Radcure coatings and inks.

BAMM TERT-BUTYL ACRYLATE is used in the production of coatings, adhesives, fibers, plastics, textiles and inks.

bossin® W-21Cimproves the curing rate the formula and decrease the dosage of photoinitiator in color formula.

PHOTOMER® 4017 TF (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

FONTAINE SHAN Cyclic Trimethylolpropane Formal Acrylate CTFA is a low viscosity monofunctional acrylate monomer that is used in a variety of UV/EB-cured applications, including inks, wood coatings, stereolithography, and photopolymer printing plates.

Photomer® 4028 exhibits moderately low viscosity, low odor, excellent cure speed and low irritancy. It contributes towards good adhesion, scuff and abrasion resistance properties in UV and EB curable formulations.