Products in Monomers & Oligomers: Polyols

Fujifilm Sucrose is a white crystalline powder, or lustrous colorless or white crystals.

Merginol 908 is a polyol based on vegetable oil with primary and secondary hydroxyl groups. The renewable content is very high.

CA - 2430 is Applied In Adhesives, PU Resins,Elastomer, PU Elastomer Fiber.

ELAPOL 5508 A by Elachem is an aliphatic, saturated polyester polyol. It contains 1,4-butanediol and mono-ethylene glycol.

Sehotech SH-526 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in freezer and internal insulation.

Sehotech SP-150 is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in PIR/PUR.

CA - 4010U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

Girnar Industries Blown Castor Oil is a honey-golden vicious liquid derived after oxidative polymerization and due to this fact, it is also known as oxidized castor oil or polymerized castor oil. It is prepared by blowing air or oxygen into castor oil at various temperatures of 80-1300C.

Swisloyd Pale Pressed Grade SL-co-pp is a vegetable oil obtained from the castor bean (technically castor seed as the castor plant, Ricinus communis, is not a member of the bean family.

PETOL® 400-3 is a propoxylated glycerol, low viscosity polyether polyol triol with an average molecular weight of 440.

Korea PTG PTMEG-1400 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

Swisloyd Linseed Stand Oil is obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The Linseed is broken and heated up to 70 C. With this temperature the oil can be crushed more easily out of the seed and the best quality oil for technical purpose can be reached. It is Drying oil with polymer-forming properties.

CA - 4030U is Applied In PU Foam, Intergral Skin, TPU, Shoe Sole.

Rokopol® F3600 is a polyether polyol, a block/statistical copolymer of ethylene oxide and propylene oxide based on glycerine. It exists in the form of homogeneous, clear liquid. It contains antioxidants (excluding BHT). It has hydroxyl value within the range of 45–50 mgKOH/g, and dynamic viscosity within the range of 540-620 mPas.

Korea PTG PTMEG-650 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

Changshu Yitong Polyurethane Product YT-2030 is regid blend polyether polyols which are used in doors against burglary, open holes and sound absorbing fomas.

PETOL® 250-3 is a propoxylated glycerol, polyether polyol triol with an average molecular weight of 670.

EXAPOL SU 280 is sucrose sorbitol – glycerin based polyether polyol of high functionality but low hydroxyl value and low viscosity.

WJESPOL 1100 is used improve adhesion

AFEX™ SB20C is a base semi-drying Oil called as Saybean having one conjugated double bonds.

WJESPOL 1200 is adhesive for EPS Panel

EXAPOL SU 465 is a medium viscosity and moderate functionality sucrose – glycerin based polyether polyol. This is a general purpose polyol

Sehotech SH-510W is mainly used in sandwich panel, refrigerator, spray foam and insulation. It is also applied in water-blown flexible foam.

CA - 5010 U is Applied In PU Foam, Intergral Skin, TPU.

Korea PTG PTMEG-1800 consistently produces high quality PTMEG products in continuous process. As a compound of THF, it is transparent liquid with viscosity at a temperature higher than ambient temperature. The PTMEG is mainly used as a raw material of polyurethane, elastomer, polyester elastomer and spandex fabric.

ELAPOL 5020 A by Elachem is an aliphatic, 1,4-butanediol based saturated polyester polyol.

Pentaerythritol 95 gradeis used to produce Alkyd resin, paint, ink, rosin, tall oil, dry oil, explosives, plasticizer, stabilizer, cosmetics.

Polioles S.A. de C.V. DB-9939 is a hyperbranched amine polyol.

ELAPOL 9020 A is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aliphatic acid and 1,4 butanediol and neopentyl glycol.

Sehotech SP-330AP is mainly applied in metal panels, spray foams, appliances and pour-in-place. It also has characteristics that improves green strength and thermal resistance.

ELAPOL 6510 B by Elachem is a linear, saturated polyester polyol. It contains aliphatic acid, 1,6-hexanediol and (NPG) neo-pentyl glycol.

ELAPOL 5030 A by Elachem is an aliphatic saturated polyester polyol. It contains 1,4-butanediol.

ELAPOL 9010 A is a linear, saturated polyester polyol by Elachem. It is manufactured with synthetic aliphatic acid and 1,4 butanediol and neopentyl glycol.

PETOL® 250-2 is a high purity polyoxypropylene glycol, homopolymer diol with an average molecular weight of 450, non-acidified quality.

Pentaerythritol 86 grade is used to produce Alkyd resin, paint, ink, rosin, tall oil, dry oil, explosives, plasticizer, stabilizer, cosmetics.