Products in Emulsifiers & Demulsifiers: Synthetic

Lutensol® ON 30 is a nonionic surfactant and 100% active alkyl polyethylene glycol ether made from a saturated synthetic short-chain fatty alcohol with approximately 3 moles of ethylene oxide. It is a high-performance surfactant with low toxicity and great emulsification, dispersion, wetting, and compatibilizing properties.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Lutensol® XL 89 is an efficient and easy-to-handle wetting agent with a C10 guerbet alcohol alkoxylate POE (8) composition and 80% active content. It is synthetically derived and readily degradable. This product can provide improved performance compared to NP-9 in various in-can and tank mix applications. Lutensol® XL 89 is suitable for a wide range of formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, wettable granules, and wettable powders.

Ethylan 1005 is a nonionic surfactant based on a synthetic primary alcohol.

Cola®Mid AL is a premium 100% active, liquid "super" amide. It is highly recommended for use in all types of shampoos, cleansers, bubble baths, and liquid detergents formulations where quality performance, extreme mildness and maximum ease of handling are required. This product is an outstanding solubilizer and coupler for essential oils and other additives, and offers excellent stability in systems ranging from pH 4 to 11.

Colonial AOS-40 is a pale yellow to light amber aqueous solution of sodium C14-16 alpha olefin sulfonate. Colonial AOS-40 combines the advantages of high foaming power, good emulsification, mildness to the skin, and excellent lime soap dispersion to give the formulator maximum flexibility in the preparation of light and heavy-duty cleaners. It is also suitable for use in acidic formulations such as those containing alpha hydroxyl acids or salicylic acid.

iSURF DEA is light yellow or amber transparent liquid. It has quite strong capability in spumescence, soakage, decontamination and antirust. Moreover, it has better capability in dispersancy, steadying froth and adding mucosity.

Silsurf® CR 1115 is a high molecular weight water and alcohol soluble silicone polyether. It is used as a wetting agent, surface tension depressant and emulsifier in various personal care and industrial chemical formulations.

LAN-AQUA-SOL 75:50 aids solubilization of water-insoluble Lanolin derivatives, perfume, vegetable oil and mineral oil to form clear aqueous and hydroalcoholic systems

Mosselman PEG 400 Monooleate P (9004-96-0) Polyethyleneglycol esters are the products obtained by the esterification of polyethyleneglycols with natural fatty acids. Depending the molecular weight of the polyethyleneglycol used and the mono- and diesters content, non-ionic esters with different HLB values are obtained. Polyethyleneglycol es-ters are mainly used as emulsifiers for oil in water emulsions. They find also application in lubricants, textiles, pesticides etc.

Silsurf®A108 is a silicone glycol copolymer. It is used as wetting agent, surface tension depressant and emulsifier in various personal care and industrial chemical formulations.

Coco diethanolamide 90%

KALCOL® 6850 is a Cetearyl Alcohol (C1618:50/50 approx.) used as co-emulsifier and thickener.

FINDET® ARH/52 is a non-ionic surfactant - PEG-40 hydrogenated castor oil- is recommended for solubilizing hydrophobic additives like fragrances and special extracts.

KALCOL® 8670 is a raw material for surfactants, conditioners, disinfectants, and plasticizers; Oil base for lubricants of synthetic resin and emulsifiers of emulsion polymerization. It can be used as raw material for creams/ointment, metal rolling oil and in cosmetics, plastic lubricants, hand and body skin care, anti-oxidants, deodorants.

AMIDET® N is a high concentrated liquid surfactant - PEG-4 Rapeseedamide - which shows very good solubilizing and emulsifying properties. It presents better performance in terms of thickening and foaming than Cocamide DEA.

The ALKEST® CSO 400H is composed of surfactants resulting from the reaction of castor oil with ethylene oxide (EO). By increasing the degree of ethoxylation, the hydrophilic character of the molecule is increased (higher HLB), which represents increasing water solubility, cloud points and pour points. This product can be used as emulsifier, antistatic agent, lubricant and solubilizer in various markets and product applications.

The ALKEST® CSO product line is composed of surfactants resulting from the reaction of castor oil with ethylene oxide (EO). Depending on the number of ethylene oxide units (degree of ethoxylation), products with various values of HLB (hydrophilic-lipophilic balance) are obtained,allowing these products to be used in a wide range of applications.

The ULTRAPEG® product line is made up of ethylene oxide polymers. It is represented by the following general formula: HO(CH2CH2O)nH According to the degree of ethoxylation(n), products with different molecular weights and melting points can be obtained, which allows the use of these products in various applications. The hydrophilicity of the polyoxyethylene chain from the ULTRAPEG® product line allows for the obtention of a hygroscopic polymer which is highly water soluble. By varying the molecular weight, liquid or solid products may be obtained, covering a wide range of viscosities and consistencies.

KALCOL® 6870P is a Cetearyl Alcohol (C1618:70/30 approx.) used as co-emulsifier and thickener.

Sodium lauryl ether (2)sulfate 28%

Sodium lauryl ether (2)sulfate 70%

The ALKEST® SP line is made up of sorbitan esters derived from the reaction of sorbitol with fatty acids. Products from the ALKEST® SP line are lipophilic, having low HLB values. The lipophilic nature makes these products soluble or dispersible in oil, favoring their use in water-in-oil (W/O) emulsions and as low HLB emulsifiers used in combination with high HLB emulsifiers in oil-in-water (O/W) emulsions. ALKEST® SP 60 and ALKEST® SP 80, when used in combination with ALKEST® TW 60 or 80, are excellent emulsifiers for beeswax, paraffin, carnauba and their mixtures, promoting stability and homogeneity of formulations. To prepare cosmetic creams and lotions, the selection of fatty acids and degrees of ethoxylation allow many combinations between the ALKEST® SP and ALKEST® TW products to obtain the right balance of emulsifiers for optimum performance and stability.

Sodium lauryl sulfate 30%

ALKEST® CSO 400 has excellent emulsifying and solubilizing properties, especially useful for fragrance solubilization in transparent shampoos and alcohol-free colognes. ALKEST® CSO 400 is a concentrated product with high content of actives and preservative free.

The ALKEST® CSO product line is composed of surfactants resulting from the reaction of castor oil with ethylene oxide (EO). Depending on the number of ethylene oxide units (degree of ethoxylation), products with various values of HLB (hydrophilic-lipophilic balance) are obtained,allowing these products to be used in a wide range of applications.

KALCOL® 8685 is used as a raw material for surfactants, conditioners, disinfectants, and plasticizers, oil base for lubricants of synthetic resin and emulsifiers of emulsion polymerization. It finds applications as raw material for creams/ointment, metal rolling oil, cosmetics, plastic lubricants, hand and body skin care, anti-oxidants, deodorants.

ALKEST® TW 80 is made up of ethoxylated sorbitan esters,Depending on the starting fatty acid and the degree of ethoxylation,with a wide range of HLB (Hydrophilic-Lipophilic Balance) values are obtained, which provides the formulator with a versatile set of emulsifiers to choose from.

KALCOL® 6098 is a Cetyl Alcohol (100% a.m.) used as co-emulsifier and thickener.

KALCOL® 8098 is a Stearyl Alcohol (100% a.m.) used as co-emulsifier and thickener.

ALKEST® TW 60 is made up of ethoxylated sorbitan esters,Depending on the starting fatty acid and the degree of ethoxylation,with a wide range of HLB (Hydrophilic-Lipophilic Balance) values are obtained, which provides the formulator with a versatile set of emulsifiers to choose from.

The ALKEST® TW 80 K is made up of ethoxylated sorbitan esters. The products in the ALKEST® TW line are hydrophilic, having high HLB values. The presence of the polyoxyethylene chain makes the products in the ALKEST® TW line soluble or dispersible in water, which favors their application in oil-in-water (O/W) emulsions, as dispersants/solubilizers of oils and fragrances, and as co-surfactants and humectants in shampoos, hand soaps, and body washes. ALKEST® SP 60 and ALKEST® SP 80, when used in combination with ALKEST® TW 60 or 80, are excellent emulsifiers for beeswax, paraffin, carnauba and their mixtures, promoting stability and homogeneity of formulations.

ALKEST® TW 20 is made up of ethoxylated sorbitan esters,Depending on the starting fatty acid and the degree of ethoxylation,with a wide range of HLB (Hydrophilic-Lipophilic Balance) values are obtained, which provides the formulator with a versatile set of emulsifiers to choose from.