Products in Soaps & Surfactants: Synthetic

Lutensol® XL 70 is a 100% active product with very fast dynamics and excellent detergency on oily soils. It has a lower tendency to form a gel compared to longer-chain alcohol ethoxylates due to its fast-acting nature, which is attributed to its superior wetting profile.

Lutensol® XP 30 is a dynamic wetting agent with a C10 Guerbet Alcohol Ethoxylate POE (3) composition and 100% active content. It is synthetically derived and readily degradable. This product is suitable for various formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Lutensol® XP 80 is a 100% active product with very fast wetting and effective cleaning. It is readily biodegradable and has a lower tendency to form gels compared to longer-chain alcohol ethoxylates. Additionally, it is listed on the EPA’s Safer Chemical Ingredients List. The final surfactant choice would be formulation-dependent.

Lutensol® XP 90 is a 100% active nonionic surfactant that enhances the wetting and degreasing power of foam cleaners. With its fast dynamics and excellent detergency on oily soils, it finds application in various fields, including dishwashing, laundry, hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial and institutional laundry, and industrial cleaning.

Lutensol® XP 50 is an excellent wetting agent composed of C10 Guerbet Alcohol Ethoxylate POE (5) with 100% active content. It is a highly effective substitute for NP-6. The product is synthetically derived and readily degradable. Lutensol® XP 50 is suitable for a wide range of formulation types, including emulsifier concentrates, oil-in-water and water-in-oil emulsions, microemulsions, suspension concentrates, suspo-emulsions, soluble liquids, and wettable powders.

Lutensol® XL 40 is available as a 100% active product and is suitable for machine floor cleaning as a foam controlling and degreasing agent. The level of residual alcohol is comparatively very low when compared to regular alcohol ethoxylates with the same degree of ethoxylation. It has a HLB value of 10.5 and is listed on the Safer Choice label. The final surfactant choice will be dependent on the formulation.

Lutensol® XP 40 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is a cloudy liquid at room temperature and tends to form sediment. The numeric code in the product name indicates the general degree of ethoxylation.

Lutensol® XP 89 is a nonionic surfactant manufactured by causing a C10-alcohol to react with ethylene oxide in stoichiometric proportions. It is an alkyl polyethylene glycol ether based on C10-guerbet alcohol and ethylene oxide and is a clear liquid at room temperature. The numeric code in the product name indicates the general degree of ethoxylation.

Lutensol® XL 50 is a 100% active product with a comparatively lower level of residual alcohol than regular alcohol ethoxylates with the same degree of ethoxylation. It is suitable for use as a foam control and degreasing agent in machine floor cleaning.

Lutensol® XL 90 is a 100% active nonionic surfactant that enhances the wetting and degreasing power of foam cleaners. With its fast dynamics and excellent detergency on oily soils, it finds application in various fields, including dishwashing, laundry, hard surface cleaning, food and beverage processing, food service and kitchen hygiene, commercial and institutional laundry, and industrial cleaning.

Lutensol® XL 80 is a 100% active product. It has very fast dynamics and excellent detergency on oily soils. Even when used at low levels, it can boost the degreasing power of the detergent without reducing the foam. It has a lower tendency to form gel compared to longer-chain alcohol ethoxylates.

Lutensol® XP 79 is capable of producing very high initial foam, making it ideal for institutional cleaning and sanitation. It is available in both 85% active product and 85% aqueous solution forms. In solid form, it is slightly yellow, while in liquid form, it is slightly pasty. The product contains no preservatives and is recommended for use with Glucopon® surfactants to synergistically reduce skin irritation in food service and kitchen hygiene applications.

Lutensol® ON 30 is a nonionic surfactant and 100% active alkyl polyethylene glycol ether made from a saturated synthetic short-chain fatty alcohol with approximately 3 moles of ethylene oxide. It is a high-performance surfactant with low toxicity and great emulsification, dispersion, wetting, and compatibilizing properties.

Ethylan 1005 is a nonionic surfactant based on a synthetic primary alcohol.

MASPHATE® SLS 94 N is produced from natural fatty alcohols. These highly concentrated dry surfactants offer formulators efficient and low carbon alternatives to traditional liquid surfactants. Given their excellent foaming property, Masphate® Sodium Lauryl Sulfate (SLS) is often used in various personal and home products such as toothpaste, hand soaps, body wash, detergents, and dishwashing liquids. It is also commonly used in industrial applications including emulsion polymerization and gypsum board manufacturing, and in agricultural formulations as a wetting agent. Free of 1,4 dioxane; Masphate® SLS provides formulators with a valued ingredient option in their pursuit of regulatory-compliant, efficient, and effective cleaning formulations. Masphate® SLS is offered in three product forms including needles, granules, and powder.

Cola®Carb TDC is a mild anionic surfactant with good hard water tolerance. It thus improves the storage stability of amphoteric formulations, and can be used in combination with all ionic classes of surfactants. This product has applications in personal care and industrial formulations.

NEWPOL PE-61 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-64 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-62 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-78 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-71 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-68 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

NEWPOL PE-108 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

I-PEG 400ML is a water-soluble non-ionic surfactant derived from synthetic and plant-based raw materials. I-PEG 400ML is suitable for use in a wide range of HI&I, personal care, and industrial formulations.

I-PEG 400 MO is a Polyethylene Glycol 400 Monooleate and they are non-ionic surfactants made via the esterification of polyethylene glycols and fatty acids derived from plant sources. PEG Esters reduce surface tension of agricultural sprays and can also help stabilize other components of your agricultural spray formulation.

It is a standard anionic surfactant. It is widely used as foam builder, wetting agent, surfactant, and dispersing agent in many applications. It is a highly concentrated sodium lauryl ether sulfate derived from natural fatty alcohols. Due to its high content of washing active substance, It is particularly suited for highly concentrated end products, or if raw materials with a lower water content are required.

iSURF BETAINE is used as a foam booster in shampoos. It is a medium strength surfactant also used in bath products like hand soaps. It is also used in cosmetics as an emulsifying agent and thickener, and to reduce irritation purely ionic surfactants would cause. It also serves as an antistatic agent in hair conditioners.

Mosselman PEG 400 Monooleate P (9004-96-0) Polyethyleneglycol esters are the products obtained by the esterification of polyethyleneglycols with natural fatty acids. Depending the molecular weight of the polyethyleneglycol used and the mono- and diesters content, non-ionic esters with different HLB values are obtained. Polyethyleneglycol es-ters are mainly used as emulsifiers for oil in water emulsions. They find also application in lubricants, textiles, pesticides etc.

LAN-AQUA-SOL 75:50 aids solubilization of water-insoluble Lanolin derivatives, perfume, vegetable oil and mineral oil to form clear aqueous and hydroalcoholic systems

The ALKEST® CSO 540 is composed of surfactants resulting from the reaction of castor oil with ethylene oxide (EO). By increasing the degree of ethoxylation, the hydrophilic character of the molecule is increased (higher HLB), which represents increasing water solubility, cloud points and pour points. This product can be used as emulsifier, antistatic agent, lubricant and solubilizer in various markets and product applications.

AMIDET® B-112 is a non ionic surfactant - cocamide DEA - used as viscosity enhancing and foam stabilizer agent.

FINDET® ARH/52 is a non-ionic surfactant - PEG-40 hydrogenated castor oil- is recommended for solubilizing hydrophobic additives like fragrances and special extracts.