Products in Additives: Hand Lay-up

MITO® E-GO™ is a graphene-based additive that delivers multi-functional improvements in composite materials at extremely low concentrations. It has been designed with versatility, realistic solutions, and accessibility in mind. This hybridized graphene oxide/POSS additive reactively disperses while resisting agglomeration, thus unlocking the properties of graphene for various industries by utilizing both thermoset and thermoplastic polymer composites.https://mitomaterials.com/products/mito-e-go

ALBIDUR® VE 3940 is a concentrated dispersion, comprising 40% high-performance elastomer within a Bisphenol A epoxy vinyl ester resin. This product serves the essential purpose of enhancing the toughness of vinyl ester resins that would otherwise be brittle. The elastomeric component in use is a specialized silicone rubber, meticulously distributed within the liquid resin as a finely dispersed second phase.

AFCONA 7202 is mainly recommended for UPE resin systems. It is considered to be a moderately strong defoamer, so it is not suitable for unpigmented or clear systems. Adding AFCONA - 7202 to resin may result in in-can haziness, but this will have a minimal effect on the final gloss and will not affect the other properties of the system.

EPOTUF® 37-630 is an accelerated amido-amine curing agent for room temperature curing of EPOTUF® epoxy resins.

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.

EPOTUF® 37-680 is an amine-functional emulsion which can be used to formulate two-component, waterborne epoxy systems with properties that approach conventional solvent-based two-component epoxy coatings.

MoldX® A400 is a third generation optimized Alumina Trihydrate (ATH) product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.MoldX® A400 optimized ATH is particularly well-suited for SMC, and it can also provide low cost flame retardancy and smoke suppression in other thermoset processes such as: epoxy potting, wet-mat, spray-up, hand lay-up, and bulk molding compounds (BMC) that contain reinforcing fibers (patent pending).

MoldX® A110 is a second generation optimized Alumina Trihydrate (ATH) product that gives improved processing viscosities at very high loadings from 250 phr to greater than 350 phr.MoldX® A110 can provide low cost flame retardancy and smoke suppression in a variety of other color sensitive thermoset processes such as: BMC, spray-up and hand lay-up, wet mat molding and epoxy potting