Products in Fillers & Extenders

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

GRANUCOL® SIG/SIL colored quartz sands are suitable for high-strength worktops and kitchen sinks. The superior mechanical stability ensures an attractive appearance, even after years. Using chemically extremely stable inorganic pigments GRANUCOL® SIG / SIL is characterized by a high color fastness and UV-stability.

GRANUCOL® HSAP is the all-rounder within the GRANUCOL® H series and a good alternative to Solid Surface (ATH). Its benefits really come to the fore in sanitaryware: the ultra-fine mineral fillers are workable post-production and can be polished as desired, achieving finishes ranging from matte to high-gloss. And besides excellent formability, Granucol HSAP also lends every composite extra durability.

Dragonite™ -XR is a halloysite-­‐based aluminosilicate clay exhibiting a rare, naturally occurring hollow tubular structure. Through its unique morphology and ideally-­‐suited chemistry, it enhances the properties of wide range of thermoset resins to meet the requirements of demanding applications. Dragonite™-XR is an untreated product grade with slightly lower reactivity and acidity due to 2% iron oxide content. It is recommended at loadings of 30 - 60 wt%.

Corro Therm CT-334 Ceramically Bonded Aluminum is a unique water-based, ceramically bonded inorganic compound. It is used successfully by casting manufacturers and powder coaters. CT-334 fills voids, porosity and other surface defects and can help avoid costly repairs or replacement. Once it is cured it can be ground, machined or over coated.

Performax™ HT are manufactured from a blend of 100% virgin polyolefin resins. PERFORMAXTM HT Synthetic Macro Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

The filler GRANUCOL® Black+ convince through the high-quality surface and at the same time extremely hard and thus extremely resistant to all influences of the everyday life. Due to its low shrinkage it facilitates the manufacturing process and thus able to meet all the requirements of designers and manufacturers.

PLEXUS™ 44F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

Performance Minerals Corporation (PMC) PMC is a dihydrous calcium sulfates are ground fillers/extenders. Particle sizing is computer controlled with air classifiers, thereby increasing the uniformity of the particulate. Our unique processing technique insures that no oversize particles enter the product stream. This allows for higher filler loading and/or lower working viscosities. Consistent product uniformity, low moisture content, and economical pricing are inherent to all of PMC's products.

GRANUCOL® DURA/SIL combines the best properties of GRANUCOL® SIG/ SIL and GRANUCOL® FFB/SIL for high-strength worktops and kitchen sinks. The colored quartz sands are available in a wide range of colors and – besides numerous design options – offer a high resistance to mechanical and chemical stress, as well as good anti-shock properties.

Pulpro PP-8 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

Pulpro PP-3 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

PERFORMAX™ Synthetic Macro Fibers are manufactured from a blend of 100% virgin polyolefin resins. PERFORMAX™ Synthetic Macro Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Glass Microspheres HGT40 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

Glass Microspheres HGT60 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

GRANUCOL® HGHW fillers have a high color diversity as well as an attractive and a lively structure Unlimited design options for shower trays, countertops and wall panels. The extremely high scratch resistance ensures stable surfaces for years.

SPECTER™ HP Synthetic Micro Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ HP Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.

Glass Microspheres HGT25 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

SPECTER™ Monofilament Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.

GENESIS™ Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Granucol® HG is the ideal filler when it matters! Shower trays, washstands and countertops impress with their extremely high scratch resistance and hardness. A high dimensional accuracy of the castings and a high degree of filling offer ideal conditions for economical production processes.

GRANUCOL® FFB/SIL offers a consistently high strength under mechanical and chemical stress. The product is characterized by a high UV-stability and good anti-shock properties. The inorganic binder ensures an optimal connection of the pigments with the quartz. The product offers economical advantages due to reduced binder consumption.

SPECTER™ 3.5 Synthetic Micro Fibers are manufactured from 100% virgin homopolymer polypropylene resins. SPECTER™ 3.5 Fibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete” and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement.

Glass Microspheres HGT30 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

GENESIS™ XF Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

GRANUCOL® Effect Mix is a new colored quartz mixture that enables particularly attractive surface designs thanks to its depth effect and color fastness. It is based on the proven GRANUCOL® fillers especiallyfor kitchen sinks and sanitary products. In addition, there is an effect pigment that is firmly integrated into the mixture in an innovative coating process. The result: A surface with metallic shimmering effects with excellent contrast and color brilliance – and high stability at the same time.

Pulpro PP-10 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

PLEXUS™ 54F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

Glass Microspheres HGT46 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

Eeonomer 500F are a new class of thermally stable, pH neutral and electrically conductive composites made by in situ deposition of polyaniline or polypyrrole on carbon black. Eeonomers are more stable (up to 300 C) than doped intrinsically conductive polymers and more easily processed with thermoplastics than carbon black. For static dissipative and antistatic composites, coatings, elastomers and adhesives.

GRANUCOL® HSAS offers exceptional scratch hardness and a high filling degree. The optimum grinding and bonding properties makes it an ideal base for bathtubs, washbasins and countertops.

The filler Granucol® White+ convince through the high-quality surface and at the same time extremely hard and thus extremely resistant to all influences of the everyday life. Due to its low shrinkage it facilitates the manufacturing process and thus able to meet all the requirements of designers and manufacturers.

Pulpro PP-20 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

CLiQSMART® N-1 is a highly efficient amine based neutraliser for aqueous systems. The low odor additive shows also excellent wetting properties as co-dispersant.

Glass Microspheres HGT36 are hollow spheres of glass manufactured for a wide variety of uses in consumer goods, medicine, research and numerous industries from Aerospace to Automotive. Hollow glass microspheres from Ceno Technologies, sometimes termed microballoons or glass bubbles, have diameters sized in micrometers (microns).

GRANUCOL® HSL doesn't take it so heavy, the mineral filler offers the easy alternative - through itslow density, the final product is 30% lighter. A particularly low shrinkage, as well as a very high scratch resistance, makes it an ideal basis for bathtubs, shower trays, washbasins and wall panels.