Products in Core Materials: Side Panels

Thermo-Cor™ FR 10.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® Xi 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® LRC 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Thermo-Cor™ FR 5.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Lantor Soric® XF 2 is a flexible honeycomb foam mat used to add structure and thickness to composite laminates. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one. Unlike standard cell honeycomb, Aero-Mat is very flexible and will conform to compound shapes. The pressure resistant cells create thickness in the laminate without the added weight of extra fabric layers. It is ideally suited for reinforcing curved laminations where additional stiffness is needed.

Thermo-Cor™ FR 7.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Soric® LRC 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® XM 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® XF 4 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® SF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 10 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Thermo-Cor™ FR 2.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Soric® TF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Lantor Soric® LRC 2 is a flexible, low resin consumption honeycomb foam mat used to add structure and thickness to composite laminates. It absorbs approximately 20% less resin compared to the “Lantor Soric XF” 2MM Aero Mat resulting in a lighter finished product. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one.

Soric® LRC 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Thermo-Cor™ FR 20.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Soric® XF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Thermo-Cor™ FR 15.0 phenolic foam is a rigid, semi-closed celled, foam that comes in a full range of densities from 2.0 pcf to 40.0 pcf.Thermo-Cor FR has a higher compression strength ratio than competing phenolic foams of the same density. Its superior structural strength makes it well suited for stand-alone panels and stress skins used either as thermal or acoustical insulation for commercial applications, especially in hospitals, nursing homes and other public places where low smoke and toxicity are important.

Coremat® Xi 5 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® Xi 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® TF 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® TF 3 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 6 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Coremat® Xi 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Coremat® XM 10 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process.

Coremat® XM 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.