Products in Core Materials: Other Core Types

emc® sensitive was originally developed for use in hospitals. The antibacterial additives integrated in the foam deprive the bacteria of their reproductive basis and are therefore particularly suitable for allergy sufferers (ie house dust mites). emc® sensitive stands for healthy textile products that are tested and certified according to Ökotex Standard 100.

Cellpur R 5060 opens up a new dimension in hygiene and comfort. For the first time, Tencel® powder with its sensational climate properties is successfully incorporated into foam. This improves the foam's absorption potential for moisture.

CELLOMER® FOAM S-2110 is a general purpose foamed board that is geared for thermoforming and post-processed.

Cellpur R 5045 opens up a new dimension in hygiene and comfort. For the first time, Tencel® powder with its sensational climate properties is successfully incorporated into foam. This improves the foam's absorption potential for moisture.

Lantor Soric® XF 2 is a flexible honeycomb foam mat used to add structure and thickness to composite laminates. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one. Unlike standard cell honeycomb, Aero-Mat is very flexible and will conform to compound shapes. The pressure resistant cells create thickness in the laminate without the added weight of extra fabric layers. It is ideally suited for reinforcing curved laminations where additional stiffness is needed.

CELLAMP® FOAM M5010 is a foamed board with outstanding Damping Properties that is geared for thermoforming and post-processed.

CELLOMER® FOAM S-2110D is a general purpose foamed board that is geared for thermoforming and post-processed.

Cellpur R 5035 opens up a new dimension in hygiene and comfort. For the first time, Tencel® powder with its sensational climate properties is successfully incorporated into foam. This improves the foam's absorption potential for moisture.

emc® classic brand fully meets the requirements for an optimal combination of ergonomics and comfort, and ideally combines the advantages of all known sleeping materials.

CELLIFF® FOAM F7010 is a foamed board with tough and rigid that is geared for thermoforming and post-processes.

Atlas F65 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

CFOAM® 25 are non-combustible coal-based carbon foams, all of which exhibit excellent mechanical and thermal properties. CFOAM® carbon foam has proved to be an excellent engineering material for many high end applications including aerospace tooling, fireproof wall core material, energy absorbing structures, blast protection systems, exhaust systems, and hot structures. CFOAM® carbon foam can also be tailored for use in thermal protection systems and as structural panels for EMI shielding and RADAR-absorbing applications. Please review the Applications section for detailed descriptions of CFOAM® carbon foam applications. CFOAM® carbon foam products are enabling technologies for a host of next-generation material systems and components. CFOAM® carbon foam can replace conventional materials in existing systems to increase product life cycle and to provide enhanced product performance properties.

Cellpur R V5020 opens up a new dimension in hygiene and comfort. For the first time, Tencel® powder with its sensational climate properties is successfully incorporated into foam. This improves the foam's absorption potential for moisture.

Atlas F80 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

CELLAMP® FOAM M5110 is a foamed board with outstanding Damping Properties that is geared for thermoforming and post-processed.

CELLIFF® FOAM F-1020ST is a foamed board with tough and rigid that is geared for thermoforming and post-processes.

deflammo ff combines standardized fire safety and first-class comfort in a high-tech product. Parts made from Eurofoam deflammo FF are certified in accordance with ÖNORM A3800 B1 (flame-retardant) and Q1 (low-smoke). At the same time, deflammo fulfills the most important European and international fire standards such as ÖNORM A3800 B1, Q1, BS 5852 Crib 5 or MVSS 302 (DIN 75200.

Lantor Soric® LRC 2 is a flexible, low resin consumption honeycomb foam mat used to add structure and thickness to composite laminates. It absorbs approximately 20% less resin compared to the “Lantor Soric XF” 2MM Aero Mat resulting in a lighter finished product. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one.

Ultracor UCF-180-3/8-3.5 is available as a honeycomb core with distinctive cell geometry. UltraFlex provides similar or higher mechanical properties than comparable hexagonal cores of equivalent density.

CELLOMER® FOAM S-2140 is a general purpose foamed board that is geared for thermoforming and post-processed.

Atlas F60 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

CFOAM® 35 HTC graphite foam is a graphitized, lightweight, highly-oriented and open-cell carbon foam produced from mesophase pitch feedstock. CFOAM® 35 HTC graphite foam has exceptionally high thermal conductivity comparable to that of copper and aluminum with significant weight savings. In addition to its high thermal conductivity, CFOAM® 35 HTC also demonstrates high electrical conductivity, high strength and a low coefficient of thermal expansion. CFOAM® 35 HTC is also easily machinable, chemically inert, corrosion free, resistant to harsh environments, and resistive to oxidation up to 400°C.

CELLAMP® FOAM M5130 is a foamed board with outstanding Damping Properties that is geared for thermoforming and post-processed.

CFOAM® 20 are non-combustible coal-based carbon foams, all of which exhibit excellent mechanical and thermal properties. CFOAM® carbon foam has proved to be an excellent engineering material for many high end applications including aerospace tooling, fireproof wall core material, energy absorbing structures, blast protection systems, exhaust systems, and hot structures. CFOAM® carbon foam can also be tailored for use in thermal protection systems and as structural panels for EMI shielding and RADAR-absorbing applications. Please review the Applications section for detailed descriptions of CFOAM® carbon foam applications. CFOAM® carbon foam products are enabling technologies for a host of next-generation material systems and components. CFOAM® carbon foam can replace conventional materials in existing systems to increase product life cycle and to provide enhanced product performance properties.

Cellpur R 5025 opens up a new dimension in hygiene and comfort. For the first time, Tencel® powder with its sensational climate properties is successfully incorporated into foam. This improves the foam's absorption potential for moisture.

CFOAM® 30 are non-combustible coal-based carbon foams, all of which exhibit excellent mechanical and thermal properties. CFOAM® carbon foam has proved to be an excellent engineering material for many high end applications including aerospace tooling, fireproof wall core material, energy absorbing structures, blast protection systems, exhaust systems, and hot structures. CFOAM® carbon foam can also be tailored for use in thermal protection systems and as structural panels for EMI shielding and RADAR-absorbing applications. Please review the Applications section for detailed descriptions of CFOAM® carbon foam applications. CFOAM® carbon foam products are enabling technologies for a host of next-generation material systems and components. CFOAM® carbon foam can replace conventional materials in existing systems to increase product life cycle and to provide enhanced product performance properties.

Ultracor UCF-204F-3/8-3.5 is available as a honeycomb core with distinctive cell geometry. UltraFlex provides similar or higher mechanical properties than comparable hexagonal cores of equivalent density.

Atlas F100 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.