Products in Honeycomb

Ultracor UCF-204F-3/8-3.5 is available as a honeycomb core with distinctive cell geometry. UltraFlex provides similar or higher mechanical properties than comparable hexagonal cores of equivalent density.

Tubus Bauer GmbH PC 2,5-110 is a tubus core made with Polycarbonate.

Nidaplast 8 in polypropylene used as the core of structural sandwich panels. Nidaplast 8 is the standard product in the range. It is suitable for use by contact or projection stratification. The surface coating (polyester non-woven) allows practically all types of materials to be laminated or bonded, for applications in many fields: building, transport, water sports, industrial equipment, sport, leisure. The Nidaplast 8 product has the " Naval Approval Certificate " issued by DNV. Germanischer Lloyd certificate.

Tricel Honeycomb (1/4 - 60 - 60 -15%) is a kraft paper product fabricated to form a continuous series of triangular cells, similar in appearance to the cross-section view of corrugated board.

Alkar Technology Standard Honeycomb Aramid-Nomex / Phenolic is Widely used in all industrial sectors, the 'Nomex' honeycomb is available in a multitude of cell diameters, from 1/16 to 1 inch, several densities and 3 cell geometries depending on the desired deformability.

Atlas F100 has a very good honeycomb structure and special chemical properties, which can be effectively used in all standard industries and processing industries, such as hand lay-up, vacuum infusion, RTM and other processes. It is a globally applicable material, widely used in fields such as wind turbine cabin covers, ships and non-structural parts.

Nomex® AHN 7800-3/16-2.0 is an Commercial Grade Nomex® honeycomb particularly suited for use where resistance to corrosive attack and moisture are important. This material exhibits good strength characteristics and is fire resistant. It is available in a variety of cell sizes and densities to suit most purposes. Typical applications include lightweight non-structural bulkheads for ships, joiner panels, shelters, antennas, and auto body panels. This material is not intended for aircraft or aerospace applications. This material also exhibits good thermal insulation properties and also has good dielectric properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding.

PAA-SFH® PAA-SFH® (Phosphoric Acid Anodized-Showa Flexible Honeycomb) 3.1-5052-19 is an aerospace grade 5052 aluminum honeycomb materials produced from phosphoric acid anodized aluminum sheets. Phosphoric acid anodize gives an excellent corrosion resistance to aluminum alloy, and the surface treatment system with a corrosion prohibited primer provide the greatest bondability and fatigue strength under critical conditions such as hot & wet condition.

Toray Advanced Composites’ aluminum commercial (AAC) grade honeycomb core is manufactured from corrosionresistant 3003 alloy foil. Designed to offer industrial users and designers high strength-to-weight properties at relatively low cost, aluminum honeycomb is particularly suitable as a shear carrying core in adhesively bonded sandwich panel assemblies.

Non-metallic honeycombs are manufactured from high temperature resistant aramid paper formed into a honeycomb structure, and coated with a phenolic resin. The combination of aramid paper and phenolic resin gives types A1 and A10 their superior strength, toughness and chemical resistance. The honeycomb cell shape is normally hexagonal for optimum mechanical properties. It can also be overexpanded to produce a rectangular cell shape and provide improved drapeability for the production of curved parts.

Teccore® TG90 creates additional stiffness in advanced composite panels at lower weight and cost. A panel density of 0.9 g/cm2 can be achieved. By replacing carbon (prepreg) content, Lantor Teccore reduces the environmental impact of carbon composites up to 40% CO2 eq. emission and energy used. Teccore has a nonwoven base made from recycled bottles and resin bonded microspheres to build up low weight volume. Lantor Teccore helps to reduce the fiber print in composite parts and makes painting much easier.

Tubus Bauer GmbH PEI 4,0-48C is a tubus core made with Polyetherimide.

Coremat® XM 10 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process.

Corrosion resistant HexWeb® Rigicell™ is manufactured by bonding together corrugated sheets of treated 5052 aluminum. This process allows fabrications of much higher density honeycomb than is possible by the expansion process. The node bond adhesive is a thermosetting type. Slices are cut from the corrugated block to specified thickness, length, and width.

Tubus Bauer GmbH PEI 4,0-64C is a tubus core made with Polyetherimide.

Nomex® AHN-4120-3/16-4.0 is an Aerospace Grade Nomex® Honeycomb which exhibits high strength and toughness in a small cell, low density, non-metallic honeycomb. It is particularly noted for its corrosion resistance. This material is fire resistant and is typically used in transport aircraft construction where low O.S.U., smoke, and toxicity characteristics are a necessity. This material also exhibits good thermal insulation properties and also has good dielectic properties. This honeycomb is easily machined, formed, and shaped and well suited to adhesive bonding.

5052 and 5056 expanded aerospace grade aluminum honeycomb materials are available in a wide selection of cell sizes and foil gages. The HexWeb® CR III coating has been developed to offer superior protection for aluminum honeycomb exposed to corrosive environments. The HexWeb® CR III system offers a clear protective film that interacts with the aluminum surface forming a stable, tightly adherent bond. The coating is primarily an organometallic polymer type that differs from the normal conversion-type corrosion protective coatings.

Non-metallic honeycombs are manufactured from high temperature resistant aramid paper formed into a honeycomb structure, and coated with a phenolic resin. The combination of aramid paper and phenolic resin gives types A1 and A10 their superior strength, toughness and chemical resistance. The honeycomb cell shape is normally hexagonal for optimum mechanical properties. It can also be overexpanded to produce a rectangular cell shape and provide improved drapeability for the production of curved parts.

Coremat® XM 2 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

CORMASTER NOMEX® INDUSTRIAL Hexagonal C2 - 9,5 is a high performance lightweight material for industrial applications and non metallic structures made from NOMEX® T722 paper sheets bonded together and coated with a phenolic resin.

Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Tubus Bauer GmbH PEI 4,0-75C is a tubus core made with Polyetherimide.