Products in Parts & Shapes: Epoxy Resins & Compounds

NP511 consists of a woven glass fabric combined with high temperature epoxy resin system. NP511 has excellent mechanical strength and electrical properties from cryogenic to elevated temperatures. Continuous operating temperature is 175°C. This material meets NEMA G-11, MIL-I-24768/3, Type GEB and IEC-60893-3-2 EP GC 203.

MC511SN, StatNot™, is a static dissipative epoxy, woven glass based material with excellent control of the static dissipative properties. This material is used where static dissipation is required from surfaces to surface of the composite, in the x, y and z directions.

NP130HF is a woven glass fabric composite combined with epoxy resin system, which is engineered to provide better physical properties than standard NEMA FR-4. It is significantly more dimensionally stable than NP130 or NP510A because of its low resin content. The main application for NP130HF is for “bed-of-nails” probe boards used for printed circuit board testing, and other structural applications. Certification to IEC-60893-3-2 EP GC 202

NP511EM is constructed of a woven glass fabric combined with a high temperature, easy machining epoxy resin. It has excellent mechanical strength and electrical properties at elevated temperatures. The continuous operating temperature is 190°C, in mechanical applications. This material meets NEMA G-11 and MIL-I-24768/3, Type GEB.

NP500A is constructed of a woven glass fabric combined with easy-machining, non-brominated epoxy resin. It is engineered to provide NEMA grade G-10 properties, but is easier to machine and more cost effective in many applications. Applications for NP500A include; low temperature thermal insulation, structural applications and various other mechanical, and electrical applications at low to moderately high temperatures. NP500A meets or exceeds the requirements of MIL-I-24768/2.

NP510A is a woven glass fabric composite combined with epoxy resin system. It is engineered to provide NEMA grade FR-4 properties. This material contains bromine on the epoxy resin backbone. NP510A is certifiable to MIL-I-24768/27, Type GEE-F.

NP130 is a woven glass fabric combined with halogenated epoxy resin system. NP130 is produced to printed circuit board quality standards. It is flame retardant, and meets the requirements of MIL-I-24768/27, Type GEE-F and IEC-60893-3-2 EP GC 202.

NP500CR (commonly referred to as G10 CR) consists of a glass fabric with an epoxy resin system resulting in excellent electrical characteristics and superior physical properties at cryogenic temperatures (-270 °C to 135 °C operating temperature range). Previously designated as Westinghouse/International Paper Micarta Cryogenic Grade 56 G12, it has low thermal conductivity and utilizes chemistry specifically designed for cryogenic applications.

RT571 is similar to RT511 using a heavy weave glass fabric substrate meeting all of the requirements of NEMA G-10. Like RT511, RT571 has excellent strength at elevated temperatures but has been formulated to facilitate the production of thick walled tubes (up to 4 times thicker than RT511). RT571 also complies with MIL-I-24768/2, Type GEE. Certification to IEC standard is pending.

Grade RT130 meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130 has excellent machining characteristics. RT130 complies with IEC 61212-3-1 EP GC 23.

The RT500X has excellent electrical properties under humid conditions and very good heat resistance and mechanical properties. RT500X is used when NEMA recognition is needed and fine machining is required. This version is made with an extra-fine weave fabric. RT500X also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-10. Certification to IEC standard is pending.

Grade RT130X meets all of the property requirements of NEMA FR-4, with the added feature of being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130X is manufactured with an extra fine glass fabric and has excellent machining characteristics. RT130X also complies with IEC 61212-3-1 EP GC 23.

The RT500F has good electrical properties under humid conditions, excellent heat resistance and mechanical properties. RT500F is made with a fine weave woven glass fabric, for better machining and a smoother surface finish. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-10. Certification to IEC standard is pending.

RT500M is composed of a medium weight glass fabric combined with an epoxy resin system. RT500M combines excellent electrical characteristics with very good physical properties. Electrical properties maintained in high humidity conditions. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-10. RT500M is not flame resistant. Certification to IEC standard is pending.

Grade RT130M meets all of the property requirements of NEMA FR-4, with the added feature being flame resistant, UL94 V-0. Typical applications include bushings, spacers and other structural parts. RT130M has excellent machining characteristics. Certification to IEC standard is pending.

The RT500 series has good electrical properties under humid conditions, excellent heat resistance and mechanical properties. RT500 grades are available in medium or fine weave fabrics. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-10. Certification to IEC standard is pending.

Cecence Limited 12K twill x 1P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

POLYDET® LiteFloor is a fiber glass reinforced composite in coils and sheets with extremely high glass content for outstanding mechanical properties.

Cecence Limited 3K plain x 3P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Durostone® EPC 203 is a fiber reinforced plastic whose glass reinforcement is based on tissue. It is characterized by good mechanical and electrical properties and meets the thermal class F.

Cecence Limited 60K 50mm POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Fiberglass Epoxy Tubing (CL) Commercial Carbon is constructed of fiber reinforced thermoset epoxy resin, fiberglass epoxy tubing (CL) is a lightweight, high strength, corrosion resistant material that can replace carbon steel, chromed steel, stainless steel, aluminum or brass in a variety of applications. General Purpose Fiberglass Epoxy Tubing.

Cecence Limited 60K 50mm PRE PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Cecence Limited 12K twill x 3P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Fiberglass Epoxy Tubing (CL) High Modulus Carbon is constructed of fiber reinforced thermoset epoxy resin, fiberglass epoxy tubing (CL) is a lightweight, high strength, corrosion resistant material that can replace carbon steel, chromed steel, stainless steel, aluminum or brass in a variety of applications. General Purpose Fiberglass Epoxy Tubing.

Cecence Limited 12K twill x 1P PRE PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Cecence Limited 60K 25mm PRE PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Cecence Limited 60K 25mm POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low, and allows for reforming after it has set. Lightweight, non rusting, high compression strength. Penetration, acid & alkali resistant.

Fiberglass Epoxy Tubing (CL) E-glass is constructed of fiber reinforced thermoset epoxy resin, fiberglass epoxy tubing (CL) is a lightweight, high strength, corrosion resistant material that can replace carbon steel, chromed steel, stainless steel, aluminum or brass in a variety of applications. General Purpose Fiberglass Epoxy Tubing.

Cecence Limited 3K plain x 1P POST PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Cecence Limited 3K plain x 1P PRE PRESS is a thermoformable epoxy resin system which has excellent shock resistance and durability. Molding temperature is low resulting in ease of deformation & thermal deformation is possible after hardening. Lightweight, non rusting, Acid & alkali resistant. Self Extinguishing.

Durostone® EPC 205 is a fiber-reinforced plastic, which has exceptionally high mechanical strength. The gain is achieved by glass roving fabric and the burning behavior is defined.

Durostone® EPM 203 is a fiber-reinforced plastic for mechanical and electrical applications. This epoxy-resin plastic offers high mechanical strength at elevated temperature. The fiber reinforcement is carried out with a glass mat (GRP).