Products in Polymers & Resins: Floors

LRBG Chemicals USA MUF400 is a resin binder used for flooring in hot press or high-frequency systems. It meets the commercial standard spec. SC253-63 and has a fast cure and low electrical arcing. It is used extensively by laminated truck flooring and container flooring manufacturers worldwide.

Paceline ECO-Extreme Resin is a Non-Hazmat laminating resin that offers unmatched strength and ease of use. Laminates using this resin show a significant increase in flexural strength over those fabricated with industry standard resins. ECO Extreme Resin is designed to achieve a high modulus allowing the fabrication of thin and rigid laminates.

KPR 6620 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6620 is suitable for processing by pultrusion. Recommended for FRP composites.

Letoxit® LFX 162 is applied for production of laminated segments reinforced with glass, carbon or kevlar fibers. Used in - parts of airplanes, sailplanes, sport boats, carriage body etc.

KPR 6420 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6420 is suitable for processing by pultrusion. Recommended for FRP composites.

Havel Composites CZ sro Epoxy resin LH 1000 is suitable for adhesion, casting, and when it is wormed up to 35°C it is suitable for lamination and spraying into hot molds. Suitable hardeners: 133-138 (100:35 - weight), pot life 15-20min.; H 10 extra clear (100:45-50 weight), pot life 20-25min.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

ORTHOPHTHALATES OP1004 is a Cultured Marble.

AOC's Vipel F013 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F013 series is ideally suited for use in hand lay-up, spray-up, filament winding and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F013 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistantVipel F013 highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Paceline Nano-Res Resin exhibits higher strength and rigidity than competing epoxy acrylic resins, and provides superior fiber wet out and working characteristics. It is excellent for use with Carbon Fiber, and other new age composite materials such as Kevlar, Spectra, Synthex, Basalt, etc.

Paceline Composite Matrix Resin is effortless to work with, and finishing edges is easy and smooth.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Letoxit® LFX 023 is applied for production of laminated segments reinforced with glass, carbon or kevlar fibers. Usage - parts of airplanes, sailplanes, sport boats, carriage body.

Paceline ECO Resin is a 2nd generation Non-Hazmat resin that offers high performance, and ease of use.

Paceline EAR1 Resin has an optimized molecular weight which gives a lower viscosity and decreased surface tension providing a superior fiber wet out.

Epoxy resin in the form of foil is designed for patent Letoxit Foil Technology (LF Technology).LF Technology is a dry lamination technique, which is suitable especially for production oflaminate structures with exactly defined reinforcement and resin content. If it is necessary toincrease the amount of resin in a certain place, it is also possible to combine epoxy resinLetoxit Foil with prepregs.Letoxit® LFX 062 is designed especially for production of composite structures with exactlydefined reinforcement and resin content, where very good mechanical properties togetherwith fire resistance and thermal resistance up to 80°C are required. The Letoxit foil isparticularly suitable for interiors of busses, trains and aircrafts. The sandwich made of Letoxit® LFX 062, glass fabric and nomex honeycomb used for train interior panels was tested accordingto DIN 5510-2 (S4,SR2, ST2).