Products in Polymers & Resins: FRP Boats

KPR 6115 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6115 is used in gel coats.

Aekyung Chemical LSD-450 is a DCPD type UPR.

KPR 6100 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6100 is used in laminations.

Lerpol RS 10 FRN is a filled resins, tixo, preaccelerated suitable fo HLU. It is specifically designed for civil transportation ships interior parts.

Lerpol 3633 is a high quality OrthoPhtalic resin, RINA approved for boatbuilding. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Fiberglass (A/Asia) Sales Pty 342S VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. 342S Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

Lerpol Cristal 025 is a clear casting resin. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

KPR 6300 by Kemrock Industries and Exports is a superior general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6300 is used in FRP composites.

Lerpol 312 is a IsoPhtalic resin for infusion. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

Lerpol R 813 VEFR is Vinylester flame retardant resins, preaccelerated, unfilled. In combination with Lavecoat FT, this resin enables the manufacturing of parts compliant with norm EN 45545, requirements R1 and R17.

Fiberglass (A/Asia) Sales Pty 6060 LSE Resin is a promoted orthophthalic laminating resin exhibiting low styrene emission. This grade shows excellent glass fiber wet out and is designed for use in general spray depositing and hand lay up. Long green time, low exotherm and low color in thick sections make this resin ideal for large structures or multiple laminates. 6060 LSE contains an ingredient which reduces styrene emission during lamination and in the period prior to gelation. Low styrene emission resins alone will not enable the molder to comply with the recommended atmospheric styrene levels, but with appropriate ventilation, these resins may assist in reducing the level of styrene in the workshop to which workers are exposed. Tests carried out to TP 261.2 (Interlaminar adhesion) show no loss in adhesion after one day delayed lay-up.

Lerpol 902 is a Pure Vinylester. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Lerpol 512 is a VinylEstyer resin for infusion. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

Lerpol 653 is a orthophtalic resin for casting. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

Fiberglass (A/Asia) Sales Pty 268 BQTN Laminating Resin is a thixatropic, quick-curing unsaturated polyester resin of orthophthalic grade for general laminating purposes. It is pre-accelerated, and suitable for both hand lay-up and gun spray-up. It is available in Australia either as 268 BQTN LSE waxed, or 268BQTN unwaxed. This resin is used for making a variety of glass fiber reinforced plastic products such as boats and canoes, bus shelters, telephone booths, stadium seating, bath tubs, water and storage tanks, cooling towers, plant and flowers pots, bath units, models, containers, dust bins, safety helmets, water and oil pipes, ash trays, septic tanks, car body parts, sporting equipment, concrete framings, chairs and tables, and other household as well as industrial articles. Glass reinforced laminates made with this resin possess excellent mechanical strength along with good rigidity and outstanding durability. The SHCP 268BQT resin and its variants are approved by Lloyd’s Register of Shipping for boat construction.

Lerpol 4633 is a DCDP medium HDT. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

KPR 6600 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6600 is used in laminations and marine applications. Approved by Lloyd’s Register of Shipping.

KPR 6430 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6430 is suitable for processing by sheet and dough molding (SMC/DMC). Recommended for FRP composites.

Lerpol 4388 is a DCPD high HDT. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

Lerpol 384 is a Orthophtalic resins for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

Lerpol 302 is a ISO-NPG high performance resin. They are formulated for rapid impregnation of fibers, no sagging on vertical surfaces and excellent throughcure. Various formulations are available, suitable for different thicknesses and different operating conditions. They are also available in low styrene emission version.

KPR 6200 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6200 is used in boats and marine applications. Approved by Lloyd’s Register of Shipping.

Lerpol 712 is a DCPD resin for infusion. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

Fiberglass (A/Asia) Sales Pty 901 Swancor VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. Swancor 901 Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

KPR 6615 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6615 is used in gel coats and marine applications. Approved by Lloyd’s Register of Shipping.

Lerpol 383 is a DCPD resin for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

Lerpol 385 is a DCPD filled resin for RTM. They are formulated with and without mineral fillers. Characterized by easy flow, good curing and excellent surface quality.

KPR 6625 by Kemrock Industries and Exports is an isophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6625 is used in NPG gel coats and marine applications. Approved by Lloyd’s Register of Shipping.