Products in Polymers & Resins: Vacuum Assisted Resin Transfer Moldin...

Crestafire® P1-3002PA is a pre-accelerated polyester resin with fire retardant properties, which make it suitable for applications where fire resistance is a major consideration. It is suitable for RTM (resin transfer molding) and RTM light applications. It requires only the addition of a catalyst to start the curing reaction.

Crystic® Polyester Resin 702PAX is a pre-accelerated orthophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crystic® Polyester Resin 703PA is a pre-accelerated dicyclopentadiene (DCPD)-based polyester resin primarily designed for vacuum injection. With its low viscosity and controlled exotherm characteristics, it is particularly suited for large vacuum injections, although other techniques can be used. This resin is approved by Lloyd’s Register of Shipping and has excellent impact resistance, especially due to its compatibility with most reinforcement types. Because of this, it is suitable for a number of heavy-duty applications within the marine, building and construction, and transportation industries. The curing reaction requires only the addition of a catalyst to begin and should be carried out at workshop temperature. The resin, mold, and workshop should all be allowed to reach at least 15°C before the process is carried out. This resin is not ideally suited for the addition of fillers or pigments, and you should get in touch with one of our technical experts before using any additives.

TC-1622 A/B is an unfilled laminating resin for high temperature mold and part fabricationformulated to provide superior wet-out and adhesion to a variety of substrates. It is agreat material for Vacuum Assisted Resin Transfer Molding (VARTM) as well as other wet lay-up methods due to its low viscosity and long working time. When properly cured TC-1622 A/B can be used up to350°F (177°C).

AOC's Vipel K010-TB series are promoted bisphenol A, epoxy-based vinyl ester resins dissolved in styrene and methyl methacrylate. Flame and smoke resistance is obtained by incorporating at least 60 parts of alumina trihydrate per 100 parts of resin.Vipel K010-TB series are ideally suited for use in hand lay-up, spray-up and filament winding processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel K010-TB series is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.Vipel K010-TB series resins are highly resistant to several chemical environments.

Havel Composites CZ sro Epoxy resin LH 289 with an extremely low viscosity. When curing offers high-quality application properties such as optimum mechanical properties, good chemical resistance, excellent thermal properties etc. It is suitable for the production of composites as well as a top coat of artificial stone. At normal storage temperatures, crystallize does not occur.

Havel Composites CZ sro Epoxy resin LH 288 with an extremely low viscosity. When curing amines or polyamines offers high-quality application characteristics such as high mechanical properties, good chemical resistance, excellent thermal properties etc. It is a low viscosity resin based on bisphenol A. Viscosity: 500 to 900 mPas / 25 ° C. At normal storage temperatures, does not occur crystallized. The advantage of mixtures of resin and hardener is recommended its clarity.