Products in Polymers & Resins: Epoxy Resins & Compounds

MITO® E-GO™ RES-1 is a laminating epoxy resin powered with our flagship product MITO® E-GO, a modified graphene oxide additive that makes graphene easy to use and accessible to all.   Designed for Compression molding applications for high-performance sporting goods, it boosts the performance of fiber-reinforced applications, resulting in significantly improved durability while maintaining a lighter weight. Secondary properties such as damping, thermal conductivity, and resistivity are also expected.   This product is sold as a kit consisting of 1 gallon of Resin loaded with 1% of MITO® E-GO® and 1 quart of MITO® standard accompanying hardener. Graphene Council Mito Materials provides in-resin graphene additive for composites Mito Materials provides in-resin graphene additive for composites

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications. FeaturesPolymer-type epoxy resin with epoxy functional groups at the both endsHigh molecular weightHigh softening points Good adhesionApplicationsPCM, CAN and other coatingsPaintThermoplastics Printed electronics Plastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

FILCO® 7885 is an epoxy resin available in non-ionic water dispersion. It appears as a milky liquid and is presented in a liquid physical form. Notably, this product holds a labeling claim of being non-flammable.

FILCO® 8006 is a product which is characterized as a modified epoxy resin available in a non-ionic water emulsion, presenting as a milky liquid. FILCO® 8006 physical state is liquid, boasting material attributes such as flexibility, excellent thermal stability, and a non-tacky surface.

FILCO® 8002 appears as a milky liquid and belongs to the category of modified epoxy resins within non-ionic water emulsions. Its physical form is liquid, and it offers a range of material features, including flexibility, good thermal stability, toughness, a high molecular weight, and a non-tacky surface.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

Rhino Linings USA, Inc. 1314 Resin is a Marine Laminating, Low Viscosity Epoxy Resin/ Offsets:West 105. Used for marine applications such as laminates, adhesives, sealers and fairing compounds. Also used where a low viscosity, quick curing epoxy system is desired. Very low mixed viscosities quickly wet thick reinforcements. Exhibits very low exudation, allowing secondary bonding with minimal preparation.

Havel Composites CZ sro Epoxy resin LH 289 with an extremely low viscosity. When curing offers high-quality application properties such as optimum mechanical properties, good chemical resistance, excellent thermal properties etc. It is suitable for the production of composites as well as a top coat of artificial stone. At normal storage temperatures, crystallize does not occur.

LAM-125 / LAM-237 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

G-Etronax® EP 11 is the composite material that does it all. G-Etronax® EP 11 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® EP 11 suitable for countless applications.

LAM-125 / LAM-224 has Low viscosity for quick wet out of synthetic composite fabrics; especially effective with Kevlar® and carbon fiber.

Biresin® CR141 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

Sicomin SR GreenPoxy 28 / SD 3304 is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. SR GreenPoxy 28 Epoxy resin is produced with 28% of carbon originating from biomass. The combination of SR GreenPoxy 28 with SD 3304 hardener yields a low viscosity epoxy resin system of medium reactivity, with outstanding wetting-out properties on glass, carbon and aramid fibers. Due to its excellent impregnation properties, it is a preferred resin for the production of highly resilient composite fiber structures using filament winding technique, hand lay-up or pultrusion.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

Letoxit® LFX 162 is applied for production of laminated segments reinforced with glass, carbon or kevlar fibers. Used in - parts of airplanes, sailplanes, sport boats, carriage body etc.

SWANCOR 2596 is a hot-melt epoxy resin, without Diuron and volatile ingredients in the formula. It is special-purpose high-rigidity and toughening product, which has better toughening properties than 2556 with light weight, excellent mechanical strength, heat resistance and corrosion resistance, etc.

Rhino Linings USA, Inc. 1310T Resin is a Thixotropic (non-draining) Epoxy for Laminating and Tooling. Thixotropic version of 1310L-6 used for vertical laminates, tooling or where a nondraining epoxy system is desired.

CHS-EPOXY 525 is a BPA type.

HexFlow® VRM37 is a 350°F curing, two-part, mid-toughened epoxy resin, specifically developed to meet the demanding requirements of structural aerospace resin transfer molding (RTM) and vacuum assisted resin transfer molding (VARTM) applications. This epoxy system supports service temperatures up to 250°F. HexFlow® VRM37 Part A is a light amber color; HexFlow® VRM37 Part B is a dark purple color.

G-Etronax® EP 10 is the composite material that does it all. G-Etronax® EP 10 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® EP 10 suitable for countless applications.

HexFlow® RTM6-2 resin is the bi-component version of HexFlow® RTM6 resin. Delivered as two different components, HexFlow® RTM6-2 resin provides several benefits over HexFlow® RTM6: air shipment is allowed, storage at 23± 3°C for 12 months, and bigger packages are possible (up to 378 kg). HexFlow® RTM6-2 resin is chemically the same as RTM6 resin and has the same high performance after mixing Part A and Part B. Their mixing ratio in weight is Part A : Part B (100 : 68.1). After mixing Part A and Part B, service temperatures from -60°C up to 120°C and cycle processing flexibility make HexFlow® RTM6 resin ideal for primary & secondary aerospace structures. Due to the low viscosity of HexFlow® RTM6 resin, there are long injection windows to facilitate large-parts manufacturing. Mixed HexFlow® RTM6-2 resin can be used with a wide range of HexForce®, HiTape® and HiMax™ reinforcements. If needed, binders are also available and fully compatible with HexFlow® RTM6-2 resin. They provide dimensional stability to the reinforcement and ease preforming processes. Mixed HexFlow® RTM6-2 resin, when combined with HiTape® & HiMax™ reinforcements, has comparable mechanical properties to the latest generation prepregs.

Biresin® CR83 is an epoxy resin system with extremely low viscosity designed specifi cally for the infusion process for the production of high performance fiber reinforced composites parts and molds. The system has thermal properties up to 80°C. Biresin® CR83 epoxy resin has a low tendency to crystallize.

Biresin® CR132 is an epoxy resin system suitable for the production of high performance fiber reinforced composite parts and molds with thermal properties up to 130°C