Products in Thermoset Resins: Filament Winding

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Vinylester Resin VE673 is a low-viscosity, non-accelerated, non-thixotropic, high-HDT epoxy novalac vinyl ester resin with outstanding chemical resistance to a wide range of substances at room temperature and elevated temperatures. This product is suitable for laminating and filament winding. It has a 16-minute gel time and can be used for chemical resistance, building and construction, and industrial applications.

Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

espol™ 39.00 is a novalac-based epoxy vinyl ester resin designed to provide exceptional mechanical and chemical resistance properties at high operating temperatures. Its novolac-based backbone imparts it with excellent resistance to aggressive chemicals and oxidizing environments. It brings in enhanced durability, showing excellent long-term retention of strength and toughness at elevated temperatures.

Crystic® Polyester Resin 197M is a medium-reactivity, orthophthalic, unsaturated polyester resin with very high mechanical properties. It is suitable for pipe and tank manufacture. This product has an 18-minute gel time and functions as a resin, binder, and matrix material.

Crystic® Resin 3454.4T AC01 has been designed for filament winding application but can also be used by hand layup or spray techniques. Its medium-to-high reactivity allows for a fast curing time, even on thin laminates. This resin is suitable for the production of glass-reinforced laminates when heat distortion resistance is required. Its high performance makes it particularly suitable for the production of oil tanks and pipes.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® High Performance Resin 3642.3 can be used by spray, filament winding, or hand layup. This resin can be used in many applications, but its high performance makes it particularly suitable for the production of oil tanks. Additionally, it can also be used for direct bonding on sanitary acrylic.

ISO112 is an isophthalic unsaturated polyester resin type 1140 according to DIN 16946-2. ISO112 is particular indicated in outdoor application.

Eagle Chemicals USP-EAGLE (PIP40-62) has ortho-based, very good mechanical properties, low viscosity, medium reactivity and good rigidity. Filament winding and hand lay up in pipe manufacturing

USP-EAGLE (PIP50-60) is an Isophthalic based Unsaturated Polyester resin with high mechanical & chemical resistance.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

DISTITRON® 411 V4 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

Ilkalem AS IR-100T is ISO thixotropic unsaturated polyester resin for GRP applications.

EPOLAM 8064 is a Low viscosity amine-cured laminating epoxy system showing excellent flexibility and high reactivity.

EPOVIA OPTIMUM® KRF 1051 - Novolac Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through filament winding,hand lay up and spray up,pultrusion method.

Lattice Composites LCWR250-TT is highly toughened, single component, long shelf life winding resin.

AOC's Vipel K010-TB series are promoted bisphenol A, epoxy-based vinyl ester resins dissolved in styrene and methyl methacrylate. Flame and smoke resistance is obtained by incorporating at least 60 parts of alumina trihydrate per 100 parts of resin.Vipel K010-TB series are ideally suited for use in hand lay-up, spray-up and filament winding processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel K010-TB series is suitable for moldings that are subjected to particularly high static or dynamic loads. Vinyl ester resins have excellent resistance to sustained heat.Vipel K010-TB series resins are highly resistant to several chemical environments.

ORTHOPHTHALATES OP1O27 is a Filament Winding.

Sicomin SR 8500 / SD 860x is a laminating epoxy systems developed by Sicomin and adapted for the production of high performance composites. It is Germanischer Llyod's certified, this multi-purpose epoxy system is recommended for the construction of large components.

PRF Composite Materials RS-L285 has very low mixed viscosity, ensuring a fast and complete impregnation of reinforcement fibers without drainage on vertical surfaces. The addition of fillers such as colloidal silica, microballoons, metal powder etc., is also acceptable to obtain special properties. The RS-L285 epoxy resin system exhibits good mechanical properties after curing at room temperature. If high temperature strength (≥ +60°C) or aircraft approval is not required, finished products made with the selection of hardener RS-H285 may be used without further heat treatment. Post curing (heat treatment) will further enhance the mechanical properties and will also increase the high temperature strength, up to 100°C being achievable depending on the selected hardener and post cure cycle used. The properties indicated in this document may only be achieved by curing/post-curing above 50°C.

Ilkalem AS PV-200 is Bisphenol-A epoxy vinylester resin for GRP applications.

Ilkalem AS P-192 is ortho unsaturated polyester resin for GRP applications.

Ilkalem AS P-1017 ETPS is ortho thixotropic low styrene emission GRP type resin.

Biresin® CR132 is an epoxy resin system suitable for the production of high performance fiber reinforced composite parts and molds with thermal properties up to 130°C

NORSODYNE® H 44173 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats,pipes and tanks through centrifugal casting,filament winding,hand lay up and spray up,injection molding,rtm,press and vacuum molding,pultrusion method.

DISTITRON® VE 100 - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce reinforced plastics,general purpose,profiles,pipes and tanks through filament winding,pultrusion method.

AOC's Vipel F737 Series is a resilient isophthalic polyester resin with excellent mechanical properties. Vipel F737 resins are used extensively in grating and in the construction of large diameter water pipes for transporting water to and from power stations. Vipel F737 Series resins can be adapted for a variety of fabrication processes.BENEFITSInternationally RecognizedVipel F737 series resins have been used in many corrosion resistant applications such as grating and water pipes, etc.Corrosion ResistanceThis resin provides excellent corrosion resistance when used in contact with inorganic and organic acids. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.VersatileSuitable for various fabricating methods such as hand lay-up, spray-up, filament winding, etc.

Norsodyne® HN-3420BHN - preaccelerated, terephthalic resin for filament winding. It is generally used in industrial sector applicatons.

Attshield 47 is a novolac epoxy vinyl ester resin that resists corrosion in a wide range of solvent, acidic, and slightly alkaline environments. This tough, high-strength resin is used to make fiberglass-reinforced laminates with high impact strength and resistance to a variety of mechanical stresses. This resin is ideal for filament winding and the production of products that require resistance to harsh environments and temperature changes. This resin has excellent wettability and curing properties as well.

NORSODYNE® F 16207 AEL - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in filament winding,injection molding,rtm method.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

Lattice Composites LCWR-1.5 is highly toughened, higher Tg version of LCWR-1.