Products in Prepregs & Molding Compounds: Compression Molding

menzolit® SMC 0160 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

SIMPREX® M940-200 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M940-200 has a medium tack. It can be cured at lower temperature (205°F) and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

Quantum Composites QC-8560 is a vinyl ester chopped E-glass fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density.

Deltapreg DT140RS is a Automotive with Interior Application.

Urochem Molding Compound 371 by BI-QEM is a urea formaldehyde resin reinforced with highly refined cellulose and modified with special purpose additives, pigments, cure regulators and lubricants. It exhibits high apparent density and very good melt-flow. It provides glossy surface, high hardness, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. Urochem Molding Compound 371 is designed for processing by compression molding. It is suitable for electrical accessories, sanitary products, caps and closures. The molded products can be recycled and exhibits good UV stability with good moisture resistance. Its shelf life is of 6 months below 20°C.

EF 10 is highly toughened Mid Tg prepreg can be cured with autoclave and used in extreme applications in automotive industry and aviation industry.

SIMPREX® H425 is an advanced vinyl ester prepreg designed to provide excellent fire retardance properties (V-0 flammability rating). It is ideal for manufacturing sandwich structures, providing good adhesion to core materials such as Nomex® honeycomb, balsa and foams. SIMPREX® H425 is a great choice for many applications in the range of low to medium service temperature, where a high degree of fire retardance is required.

Lattice Composites LCMC-G2 is a high Tg version of LCMC-G1.

Park’s E-766B is a low tack, self adhesive epoxy resin system designed for honeycomb applications. E-766B displays excellent peel properties.

Park’s F-502 is a MIL-R-9299 phenolic resin system suitable for impregnation on any MIL-C-9084 fabric with a compatible finish. F-502 is used in the manufacture of ablative reinforcements in rocket nozzles, as well as ducting and secondary structures.

Deltapreg DT151RE is a Automotive, Sports and Leisure, Life innovation with Exterior and Interior Application.

HexPly® M76 is a versatile curing toughened epoxy resin that can be cured from 275ºF (135ºC) to 350ºF (177ºC), depending on service temperature requirements. HexPly® M76 is formulated for lower temperature autoclave or press mold processing. The recommended lay-up procedure for HexPly® M76 is HSP-L4. The recommended cure procedures are HSP-C5 (275ºF) or HSP-C1 (350ºF).

Toray MS-1A is a high performance carbon fiber/epoxy resin compression molding system based on high-modulus carbon fiber. MS-1A compression molding compound yields unparalleled stiffness and high strength. MS-1A is qualified for space Applicationss. 138°C (280°F) Cure High-Modulus Compression Molding System

Toray E760 is a highly toughened epoxy component prepreg with exceptional high temperature performance. It has been designed for use in mechanically demanding structural Applicationss exposed to elevated temperature environments, such as Formula 1 and high performance automotive. 180°C (350°F) Cure System Highly Toughened Epoxy Component Prepreg

menzolit® SMC 0200 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Quantum Composites QC 7810FR is a polyester ESC® molding compound designed for compression molding of components requiring high structural strength and flame resistance. It is suggested for applications subject to impacts of rough handling. This is a halogen free fire retardant system.

Toray Toray CFRT® TL-2100 consist of the same composition resin, carbon fiber, and laminate )concept of our proprietary sandwich construction. The carbon fiber (graphite) provides strength, stiffness, and durability. TL-2100 Semi-Flex, Semi-Rigid, Rigid, and Ultra differ only in terms of the volume of carbon fiber used and the thickness of the sheet material. TL-2100’s custom-designed weave provides high-strength carbon fiber in the longitudinal direction of an orthotic.

SIMPREX® H425-200 is an advanced vinyl ester prepreg designed to provide excellent fire retardance properties (V-0 flammability rating). It is ideal for manufacturing sandwich structures, providing good adhesion to core materials such as Nomex® honeycomb, balsa and foams. SIMPREX® H425-200 is a great choice for many applications in the range of low to medium service temperature, where a high degree of fire retardance is required.

Park’s E-761 is a versatile self-adhesive epoxy matrix for use in aerospace and commercial applications where ease of processing and cost are key considerations.

Toray RS-8HT is a BMI resin that provides excellent elevated temperature properties and processability. RS-8HT has been evaluated and qualified in the areas of satellite and airframe/missile structures. RS-8HT is also available in several modified formulations including: RS-8M, a high service temperature controlled flow formulation. 204°C (400°F) Cure BMI Resin System

Resinoid 2020 is a fabric reinforced, two-step phenolic molding compound. It exhibits excellent moldability in transfer molding. It possesses excellent dimensional stability and impact strength properties. It is available in bulk form and is recommended for compression or transfer molding.

PRF Composite Materials RP442 is designed to give an initial cure at low temperatures with enhanced toughness and higher service temperature, giving great flexibility in component manufacture. The system also has a longer out life for a low temperature system: up to 30 days at 20°C. RP442 can be supplied on a variety of PRF’s high quality reinforcement fabrics.

Toray TC350-1 is a toughened matrix for structural advanced composite Applicationss. TC350-1 offers an excellent balance of toughness, mechanical property translation, and hot/wet performance. It is easily processed via out-ofautoclave or press curing operations. TC350-1 develops a 191°C (376°F) Tg after a 177°C (350°F) cure, which coupled with low moisture absorption translates into excellent hot/wet performance. TC350-1 is available with virtually all fiber reinforcements in uni-directional tape, slit uni-directional tape, woven, and non-woven prepreg formats. 177°C (350°F) Cure, Toughened Epoxy Prepreg.

StarPCS™ SBMC-601 is a discontinuous carbon fiber reinforced molding compound containing carbon fiber, a vinyl substituted polysiloxane resin, and refractory particulate. SBMC-601 cures at temperatures between 180-250o C and functions as a high temperature carbon fiber reinforced structure with a silicon oxycarbide ceramic. Curing produces a green fiber reinforced composite material. Further processing to 850o C (minimum) in inert gas results in an amorphous silicon oxycarbide matrix ceramic composite that can be used as a pre-form for use with different infiltration polymers or materials. Ideal infiltration polymers include Polyramic® SPR-688 or SPR-212 based slurries (SL-227, SL-480), and other Starfire® Systems polysiloxane products.

menzolit® SMC 0150 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

PREGNIT TP-PU is printable, suitable for backing splash, back-foaming, Deep drawing and thermoforming, high wear resistance.

Haysite Reinforced Plastics 14100 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

AMC® 8593HT is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

PREGNIT TP-PA has high strength, rigidity and toughness.

Renegade Materials Corporation RM-1100 Polyimide produces thousands of pounds of polyimide prepregs for flight hardware every month with a perfect quality and delivery record! Renegade Materials' high temperature prepregs and adhesives are powered by next generation polyimide resin technology. As the largest production supplier of polyimide composite materials in the world, we are the industry's most-trusted commercial source for AFR-PE-4 and other aerospace grade polyimide materials. Renegade Materials is the exclusive supplier of prepregs made with proprietary RM-1100 polyimide resin technology offering the highest temperature polymeric solution for commercial and military engine/aircraft applications up to 700°F. Renegade Materials is also the exclusive supplier of prepregs made with patented MVK-14M FreeFormTM, a polyimide prepreg used in global commercial aircraft applications up to 550°F.

Mar-Bal MB1000-15 is designed for powder coating and electrostatic painting applications.

SIMPREX® M850 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M850 has a medium to high tack and provides good adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

Resinoid 2101 is an organic fiber reinforced, two-step phenolic molding compound. It was specifically developed for molded parts requiring nominal mechanical strengths and excellent electrical properties. This material comes in pelletized form an d in grades suitable for injection, transfer or compression molding.

SIMPREX® M655-200 is an advanced vinyl ester prepreg designed to provide a high performance-to-cost ratio. SIMPREX® M655-200 has a medium to high tack. It can be cured at lower temperature (205-290°F) and provides excellent surface finish. It has high adhesion to core materials such as Nomex® honeycomb, balsa and polyurethane foam. It is a great choice for many applications in the range of low to medium service temperature.

Urochem Molding Compound 161 by BI-QEM is a highly refined cellulose reinforced urea formaldehyde resin. It is modified with special purpose additives, pigments, cure regulators and lubricants. It exhibits low shrinkage, low water absorption and high strength. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. It is designed for processing by compression molding. Urochem Molding Compound 161 is suitable for circuit breakers and electrical accessories. Its shelf life is of 12 months below 20°C. The molded products can be recycled and exhibits good UV stability with good moisture resistance.

menzolit® SMC 0430 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is a must to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.