Products in Reinforcements: Polypropylenes (PP)

G-TEX TM 200 is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. 200 denotes the fabric areal weight in gsm.

3B Fiberglass DS 2200-13P is a 13 μm filament dia-meter, 4 mm long chopped glass fiber designed for production of Polyolefin compounds.DS 2200-13P shows outstanding compatibility with Polypropylene. This is the material of choice for very high glass content (up to 50 %wt) compound grades that require good fiber dispersion as well as mechanical properties. DS 2200-13P is also desig-ned for parts weathering in prolonged contact with water, detergents and glycol. DS 2200-13P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-13P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation.DS 2200-13P’s sizing chemistry also requires reduced amount of coupling agents so that parts reach optimum mechanical performances.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

Woven fabrics made of FILAVA™ WF BSB3_0800.XXX.0127.T2/2.ISAA continuous filament for technical textiles and high-performance composites.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

362C Direct Roving is specifically designed for continuous fiber-glass reinforced thermoplastic (CFRT) application in modified PP/PE resin. CFRT materials are widely used in automotive, construction, sports, electric and electronic applications.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

Kamenny Vek BCF 13-150-KV42A direct is mainly recommended for pultrusion technology and for processing into woven fabrics, UD tapes, multiaxial fabrics, prepregs and other composite products. It is compatible with polyurethane and thermoplastic (polyamide, polypropylene, polyethylene etc.) resins.

Chopped strands or Chopped fibers made of FILAVA™ CS BSB3_011.06.IS65T.D fibers are designed to reinforce thermoplastics or thermoset composites and can be used for wet and dry fiber laying processes, compounding and injection molding (see ISOMATEX Sales department for more information).

SELCOM SRL Multiaxial Technology CBX200 is a non-crimped fabric reinforced with carbon fibers.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

Mafic Basalt Direct Roving 13 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

Fibres Recherche Developpement Fibra B2 is a collection of European (flax, hemp) and exotic (sisal, coco, kenaf...) fibers with mean lengths ranging from 1 to 20 mm. These fibers are intended for use in the reinforcement of thermoplastic, thermoset, and concrete materials..

SELCOM SRL Multiaxial Technology CBX50 is a non-crimped fabric reinforced with carbon fibers.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

Kamenny Vek BCS 13-1/4”-KV02M is mainly recommended for friction material production using phenolic resin and for production of compounds by extrusion process with polyamide, polypropylene, polyethylene or high density.

G-TEX TM SM45 is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. SM45 denotes Fiber type; it signifies Standard modulus with strength between 4-5GPa.is Nonwoven fabric made from recycled carbon fiber and mixed with thermoplastic fibers. SM45 denotes Fiber type; it signifies Standard modulus with strength between 4-5GPa.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

powerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weight

910 Assembled Roving for thermoplastic is coated with a silane-based sizing compatible with multiple resin systems such as PP, AS/ABS, especially reinforcing PA for good hydrolysis resistant. 910 is typically designed for twin-screw extrusion process to manufacture thermoplastic granules. Key applications include railway track fastening pieces, automotive parts, electrical & electronic applications.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Standard product for PE and PP, excellent white color. Applied in automobile, electric products, daily use and build. FDA approval and NPE free.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.