Products in Reinforcements: Polyurethanes (PU)

Mafic Basalt Direct Roving 13 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.

Ultra Fatigue was specifically developed for leaf springs in the passenger car and truck sectors. The unidirectional fabric saves up to 50% in weight compared to steel, boasts a longer service life and features outstanding fatigue properties. It is Processed using the RTM process, it can be used with epoxy and PU resins and is ideally suited for high volume production.

Polyrov DR is an E-CR single end direct roving specifically designed for use in Weaving, Pultrusion and Filament Winding processes. With a consistent unwinding tension, the direct rovings also offer superb processability with high productivity levels, low fuzz, low static and fast resin wet-out

Bemis Company SRT6000 is Waterproof SRT is a soft woven fabric that provides seam reinforcing strength coupled with waterproofing performance on light-medium weight 3-layer waterproof fabrics.

Kamenny Vek BCF 13-150-KV42A direct is mainly recommended for pultrusion technology and for processing into woven fabrics, UD tapes, multiaxial fabrics, prepregs and other composite products. It is compatible with polyurethane and thermoplastic (polyamide, polypropylene, polyethylene etc.) resins.

Bemis Company SRT4100 is a lightweight stretch knit face fabric and adhesive film backer offers extremely soft hand feel and good seam reinforcement on light weight stretch knit fabrics.

Bemis Company NSRT3900 is a narrow width elastic face fabric and adhesive film backer allows for optimal stretch and recovery.

SELCOM SRL Multiaxial Technology CBX150 is a non-crimped fabric reinforced with carbon fibers.

Polyrov SR is an E-CR glass assembled roving specifically designed for use in the Spray Up process, suitable for thick or thin laminates. The roving offers consistent chopping performance with an even spray pattern. Low static, good laydown and excellent strand separation also make it extremely easy to work with.

Texstrand® 110 rovings are texturized into single end entangled or bulked rovings. Texstrand® 110 is utilized to improve the shear strength of pultruded profiles, decrease resin richness and edge cracking in thin pultruded components and as a replacement for continuous strand mat in small and tubular profiles. Texstrand® is most often used in the production of window profiles, which typically have many thin cross sections. Texstrand® 110 is comprised of E-glass rovings, which have been air jet entangled or bulked to form a larger strand. Sizing is compatible with polyester, vinyl ester, epoxy, and polyurethane.

3B Fiberglass CM 1020 is a non-woven mat made out of E-CR glass filaments, consisting of continuous fibers randomly oriented in multiple layers. The glassfibre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CM 1020 family products contain an insoluble binder compatible with a large range of thermoset matrices like both unfilled or filled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) and polyurethane (PU) resin systems.The CM 1020 powder mat is ideally suited for polyurethane foaming pro-cesses for the reinforcement of foam panels. The excellent mechanical pro-perties provided by 3B CFM combined with the good opening and the easy expansion of the CM 1020 mat during foam expansion make those reinforced R-PUF panels ideal for applications like thermal insulation of liquefied natural gas carrier and onshore storage.

3B Fiberglass M8610 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

CWP200 is High performance fiber woven fabric. It is a kind of fabric woven from various high-performance fibers with surface treatment through different weaving processes such as plain weaving and twill weaving. Products are widely used in aerospace, military industry and national defense, infrastructure engineering, wind blades, sports and leisure and other fields.

Bemis Company SRT5000RC is Face Fabric made from 92% Recycled Polyester + 8% Spandex. Stretch woven face fabric for soft hand feel and strong seam reinforcement on stretch medium weight woven fabrics.

467W-2400 Twist‑free and alkali‑free direct yarn, suitable for weaving process, mainly used for PU Fan blades. Suitable for polyurethane resin ( PU ).

SELCOM SRL Multiaxial Technology CBX200 is a non-crimped fabric reinforced with carbon fibers.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

SELCOM SRL Multiaxial Technology CBX50 is a non-crimped fabric reinforced with carbon fibers.

Bemis Company RSRT3000 is a reflective coated knit face fabric and adhesive film backer provides added visibility while still providing reinforced strength and good stretch and recovery to move with the garment.

Mafic Basalt Direct Roving 9 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.

Polyknit Easyfit is a warp knitted 100% glass fabric offering excellent conformability and drape. This fabric is especially well suited to the SRIM process for the reinforcement of Polyurethane moldings.

HWP180CA is High performance fiber woven fabric. It is a kind of fabric woven from various high-performance fibers with surface treatment through different weaving processes such as plain weaving and twill weaving. Products are widely used in aerospace, military industry and national defense, infrastructure engineering, wind blades, sports and leisure and other fields.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

3B Fiberglass R25H consist of continuous glass filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures excellent resin-to-glass bonding.Corrosion resistant R25H Direct Rovings made of Advantex® glass are specifically designed for filament winding processes (continuous or discontinuous) for the manufacturing of composite pipes. The silane sizing of R25H is designed for excellent adhesion to thermoset resins and is also drinking water contact approved. Also, combination of high temperature resistance of E-CR Advantex® glass and easy texturisation of R25H Direct Rovings make them ideal for muffler filling.R25H Direct Rovings made of Advantex® glass are also used in pultrusion or weaving-knitting processes under specific conditions; contact us for further assistance.

3B Fiberglass CM 4020 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CFM products contain an insoluble binder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl, ester, epoxy and polyurethane resin systems. The CM 4020 mat is ideally suited for injection molding RTM and S-RIM processes. The CM 4020 mat has a high rigidity which helps to work with large CFM cuts without loosing _x005F_x001f_bres. The ex-cellent mechanical properties provided by CM 4020 combined with the good electrical properties of the resins make the molded parts attractive for applica-tions like the electrical apparatus (high voltage), transportation and automotive industries, infrastructures equipments.

3B Fiberglass SE 1043 consists of continuous glass filaments bonded into a single strand and wound onto a bobbin shape without twist. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. Corrosion resistant SE 1043 Fibreglassmade of E-CR glass is specifi-cally designed for the manufacturing of composites pipes and under-ground & chemicals tanks. SE 1043 is also used in pultrusion to manufacture profiles and in weaving-knitting processes. SE 1043 is tested in compliance with BS 14020 and IS 11320.

BWP200 is High performance fiber woven fabric. It is a kind of fabric woven from various high-performance fibers with surface treatment through different weaving processes such as plain weaving and twill weaving. Products are widely used in aerospace, military industry and national defense, infrastructure engineering, wind blades, sports and leisure and other fields.

Mafic Basalt Direct Roving 19 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.

Texstrand® 225 rovings are texturized into single end entangled or bulked rovings. Texstrand® 225 is utilized to improve the shear strength of pultruded profiles, decrease resin richness and edge cracking in thin pultruded components and as a replacement for continuous strand mat in small and tubular profiles. Texstrand® 225 is most often used in the production of window profiles, which typically have many thin cross sections. Texstrand® 225 is comprised of E-glass rovings, which have been air jet entangled or bulked to form a larger strand. Sizing is compatible with polyester, vinyl ester, epoxy, and polyurethane.

3B Fiberglass M8615 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

This reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and betier porosity.