Products in Reinforcements: Unsaturated Polyester (UPE)

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Owens Corning 495 multi-end roving represents a compelling solution for enhancing reinforcement when highly demanding mechanical performance are required, especially in pipe applications. 495 product is made from Advantex® glass strands. It is compatible with unsaturated polyester and vinyl ester resins.

622 Assembled Roving for Centrifugal Casting process is coated with a silane-based sizing, compatible with unsaturated polyester resins. 622 is a proprietary sizing formulation applied using a special manufacturing process which together result in an extremely fast wet-out speed and very low resin demand. These features enable maximum filler loading and therefore the lowest cost pipe manufacture. This roving is mainly used to manufacture centrifugal casting pipes of various specifications and some special spay-up processes.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

D1-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Polyrov DR is an E-CR single end direct roving specifically designed for use in Weaving, Pultrusion and Filament Winding processes. With a consistent unwinding tension, the direct rovings also offer superb processability with high productivity levels, low fuzz, low static and fast resin wet-out

D2-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

EWR270 is a plain type woven roving which are compatible with UP, VE, EP and PF resins. Woven rovings are a weight range of 260g/m -1,600 g/m and available with a width range of 50mm-3,000mm.

702 Direct Roving and Assembled Roving is coated with a silane-based sizing. Specially designed for texturizing and weaving of wet processes , it is suitable for use in texturized roving, texturized fiberglass loomstate, fiberglass tape, fiberglass rope and mesh, etc. It is widely used in smelting, power generation, shipbuilding, automobile, oil field filtration and other sealing insulation materials and construction, transportation, chemical, environmental protection, national defense and other thermal insulation materials.

SELCOM SRL Multiaxial Technology CBX200 is a non-crimped fabric reinforced with carbon fibers.

D3-440-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

D1-041-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Muehlmeier E-CR glass mat - powder bonded consists of cut and non-oriented E-CR glass strands which have silane size. The binding of the strands amongst each other happens by a powder mat binder on polyester base which is easily soluble in styrene. Working happens in the well-known contact- and continuous processes. The mat is suitable for UP, EP and vinyl ester resins. Compared to E-glass E-CR glass has excellent resistance against chemical and thermal influences and also a higher dielectric strength.

Muehlmeier Silanized roving fabric are flat glass fiber products made by weaving multiple roving strands together. They find their main use in large and high-strength fiber-glass products such as boats, railway carriages, storage tanks and architectural structures.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Owens Corning ME4040 is a multi-end, choppable roving, represents a compelling solution for the manufacture of translucent panels and preforms where high translucency and fast wet-out are most important. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with unsaturated polyester resins.

D1-073-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SELCOM SRL Multiaxial Technology CBX150 is a non-crimped fabric reinforced with carbon fibers.

D3-240-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Muehlmeier E-Glass - emulsion bonded E-CSM 225 consists of cut and non-oriented e-glass strands which have silane size. The binding of the strands amongst each other happens by a liquid mat binder on PVAc base which is easily soluble in styrene. Working happens in the well-known contact- or continuous processes. The mat is suitable for UP, EP and vinyl ester resins.

D4-220-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Polyrov SR is an E-CR glass assembled roving specifically designed for use in the Spray Up process, suitable for thick or thin laminates. The roving offers consistent chopping performance with an even spray pattern. Low static, good laydown and excellent strand separation also make it extremely easy to work with.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Muehlmeier E-glass mat E-CSM- emulsion bonded consists of cut and non-oriented E-CR glass strands, which have silane size. The binding of the strands amongst each other happens by a liquid mat binder on PVAc base which is easily soluble in styrene. Working happens in the well known contact- and continuous processes. The mat is suitable for UP, EP and vinyl ester resins. Compared to E-glass E-CR glass has excellent resistance against chemical and thermal influences and also a higher dielectric strength.

Polyknit Easyfit is a warp knitted 100% glass fabric offering excellent conformability and drape. This fabric is especially well suited to the SRIM process for the reinforcement of Polyurethane moldings.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

D1-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

SELCOM SRL Multiaxial Technology CBX50 is a non-crimped fabric reinforced with carbon fibers.

D3-200-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.