Products in Reinforcements: Brake Pads

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

Osaka Gas Chemicals S-246 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals S-243 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals S-247 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Zoltek has developed a new product and sizing chemistry for use in vinyl ester resin systems. Introducing Zoltek’s PX35 Vinyl Ester Compatible Tow product. This new product, based on our proprietary sizing chemistry, exhibits excellent adhesion to and compatibility with vinyl ester resin systems. Most carbon fiber products are used to reinforce epoxy resin systems. Recently, the demand has grown for a product and sizing chemistry that can be used in vinyl ester resins whether cured thermally or via room temperature infusion. When compared to Zoltek’s standard carbon fiber product, PX35 Epoxy Compatible Tow, the new vinyl ester compatible product has significantly higher interlaminar shear strength (ILSS) and transverse flexural strength TFS, which both measure and indicate fiber to resin matrix compatibility and adhesion, as well as, composite performance. Zoltek’s PX35 Vinyl Ester Compatible Continuous Carbon Fiber is manufactured from a polyacrylonitrile (PAN) precursor fiber. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user flexibility to design and manufacture composite materials.

ZOLTEK PX35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. ZOLTEK PX35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. ZOLTEK quality focuses on spool to spool consistency yielding low coefficients of variation.

Osaka Gas Chemicals S-2415 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals SC-2415 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Style 128 is 6.00 oz. per square yard (203 g/m2) plain weave fiberglass fabric.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

ZOLTEK PX30 Woven Carbon Fabrics tailorability results from controlling the yield on rovings and yarns, and allows for a variety of finished composite thicknesses. The spun yarns have many surface fibrils that protrude in various directions at various lengths from the surface. This fiber loft contributes to high cross-ply tensile and interlaminar shear strengths for 2-D composite materials. Contour conformation without wrinkling is another advantage of spun yarn fabrics. ZOLTEK PX30 materials undergo high temperature carbonization process, involving a long temperature soak time, resulting in a very thermally stable and chemically pure fabric with low oxidation rate.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

Kamenny Vek BCS 13-1/4”-KV02M is mainly recommended for friction material production using phenolic resin and for production of compounds by extrusion process with polyamide, polypropylene, polyethylene or high density.

Osaka Gas Chemicals S-249K is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

Goonvean Fibers TEC03CON410 are milled acrylic fibers, also known as random length or ground flocks, are polyacrylonitrile fibers that are widely used to improve the properties of a wide range of industrial products.

Goonvean Fibers TEC03CON412 are milled acrylic fibers, also known as random length or ground flocks, are polyacrylonitrile fibers that are widely used to improve the properties of a wide range of industrial products.

Osaka Gas Chemicals S-244 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals SC-243 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals SC-244 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

ZOLTEK PX30 Woven Carbon Fabrics tailorability results from controlling the yield on rovings and yarns, and allows for a variety of finished composite thicknesses. The spun yarns have many surface fibrils that protrude in various directions at various lengths from the surface. This fiber loft contributes to high cross-ply tensile and interlaminar shear strengths for 2-D composite materials. Contour conformation without wrinkling is another advantage of spun yarn fabrics. ZOLTEK PX30 materials undergo high temperature carbonization process, involving a long temperature soak time, resulting in a very thermally stable and chemically pure fabric with low oxidation rate.

Osaka Gas Chemicals S-241 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals SG-2404N is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Technobasalt® Fiber is a unique material that transfers the power of nature to new technologies!Basalt fiber is a piece of complex basalt fiber of fixed length. Depending on the customer’s requirements, basalt fiber can be supplied both in the form of crumbly monofilaments, and in the form of pieces of complex basalt fibers glued together.

Osaka Gas Chemicals S-344 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Goonvean Fibers TEC03CON411 are milled acrylic fibers, also known as random length or ground flocks, are polyacrylonitrile fibers that are widely used to improve the properties of a wide range of industrial products.

Style 220 is 3.22 oz. per square yard (109.18 g/m2) 4 harness satin (crowfoot) weave fiberglass fabric.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

Osaka Gas Chemicals S-242 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals S-2404N is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Osaka Gas Chemicals S-343 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

Style 120 is 3.16 oz. per square yard (107.4 g/m2) 4 harness satin (crowfoot) weave fiberglass fabric.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

ZOLTEK PXFT carbonized felts are produced from 100% ZOLTEK OX felts, being continuously carbonized and supplied in roll form. ZOLTEK PXFT carbonized felts can be used in many applications, including: stationary energy storage batteries, fire protective insulation, high temperature furnace linings, acid gas mist eliminators and in carbon composite materials. Customers can apply their own post treatments and the carbonized felt is easy to cut and process for specific enduse applications.

ZOLTEK PX30 Woven Carbon Fabrics tailorability results from controlling the yield on rovings and yarns, and allows for a variety of finished composite thicknesses. The spun yarns have many surface fibrils that protrude in various directions at various lengths from the surface. This fiber loft contributes to high cross-ply tensile and interlaminar shear strengths for 2-D composite materials. Contour conformation without wrinkling is another advantage of spun yarn fabrics. ZOLTEK PX30 materials undergo high temperature carbonization process, involving a long temperature soak time, resulting in a very thermally stable and chemically pure fabric with low oxidation rate.