Products in Reinforcements: Pipe Reinforcement

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

C-QX 2300 is a carbon fiber type.

E-2LTI 7200 is a E-Glass fiber type.

Owens Corning M130 chopped strand mat represents a general-purpose solution for open mold hand lay-up applications in a variety of industries. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of medium tex, chopped strands randomly dispersed and bonded together by a highly soluble polyester powder binder. Certified by Lloyd’s Register of Shipping (Pending).

3B Fiberglass SE 1043 consists of continuous glass filaments bonded into a single strand and wound onto a bobbin shape without twist. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. Corrosion resistant SE 1043 Fibreglassmade of E-CR glass is specifi-cally designed for the manufacturing of composites pipes and under-ground & chemicals tanks. SE 1043 is also used in pultrusion to manufacture profiles and in weaving-knitting processes. SE 1043 is tested in compliance with BS 14020 and IS 11320.

468T roving is used in filament winding applications in epoxide resin systems. The direct rovings can be used to manufacture pipes and gas cylinders.

E-QX 4800 is a E-Glass fiber type.

E-3LTI 10800 is a E-Glass fiber type.

C-LT 0900 is a carbon fiber type.

E-T 1200 is a E-Glass fiber type.

Owens Corning SE2348 roving is designed for applications demanding high strength, excellent fatigue life, and excellent processing in a variety of applications. • Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with epoxy and polyurethane resin systems.

E-LT 2900 is a E-Glass fiber type.

469H Roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture optic cable protective sleeves, pipes and pultruded profiles.

E-LT 1800 is a E-Glass fiber type.

Owens Corning 495 multi-end roving represents a compelling solution for enhancing reinforcement when highly demanding mechanical performance are required, especially in pipe applications. 495 product is made from Advantex® glass strands. It is compatible with unsaturated polyester and vinyl ester resins.

E-LT 3200 is a E-Glass fiber type.

E-T 1600 is a E-Glass fiber type.

C-LT 1100 is a carbon fiber type.

468HS roving is used in filament winding and pultrusion applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and gas cylinders.

C-L 0900 is a carbon fiber type.

C-LT 2200 is a carbon fiber type.

468A roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and other insulations.

C-LT 1800 is a carbon fiber type.

C-QX 1800 is a carbon fiber type.

E-LT 3600 is a E-Glass fiber type.

3B Fiberglass CR 6202 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

E-T 0900 is a E-Glass fiber type.

E-QX 3500 is a E-Glass fiber type.

468B-1103 is a Twist‑free and alkali‑free direct yarn, suitable for winding process, mainly used for high‑pressure epoxy pipes. Suitable for epoxy resin ( EP ).

3B Fiberglass 399 Direct Rovings consist of continuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding.Corrosion resistant 399 Direct Rovings made of Advantex® glassare specifically designed for pultrusion process and are compatible with thermosets resins. They are the materials of choice for the manufacturing of high quality profiles. 399 Direct Rovings made of Advantex® glass are also used in filament winding process under specific conditions; contact us for further assistance.

Twaron® filament yarn can be used in a very wide range of applications, including ballistic-protection products, composites, cut-protection products, elastomer reinforcements, heat-protection products, optical fiber cables, reinforced thermoplastic pipes, ropes and cables, and tires.

3B Fiberglass SE 4220 are corresponds to 3B’s portfolio of direct roving glassfi bre designed to rein-force polyolefi ns. Made out of E-CR glass, these direct roving fi bres consist of conti-nuous fi laments bonded together into a single strand and wound into a cylindrical shaped bobbin. SE 4220 (17μm) corresponds to an E-CR glass made direct roving whose strand consists of gathered 17μm diameter glass fi laments for reinforcing polyolefi ns. This 17μm fi lament diameter product offers the best compromise between mechanical performances and aptitude for knitting/weaving in the case of Continuous Fiber Thermoplastics manu-facturing. This is also the most common fi lament diameter in use for the production of LFT pellets or D-LFT parts. SE 4220 (17μm) is compatible with both polyethylene (PE) and polypropylene (PP).SE 4220 (17μm) direct roving is internal/inside pull and is available in 1200 tex and 2400 tex linear densities.

E-QX 1900 is a E-Glass fiber type.

E-LT 2400 is a E-Glass fiber type.

3B Fiberglass R25H consist of continuous glass filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures excellent resin-to-glass bonding.Corrosion resistant R25H Direct Rovings made of Advantex® glass are specifically designed for filament winding processes (continuous or discontinuous) for the manufacturing of composite pipes. The silane sizing of R25H is designed for excellent adhesion to thermoset resins and is also drinking water contact approved. Also, combination of high temperature resistance of E-CR Advantex® glass and easy texturisation of R25H Direct Rovings make them ideal for muffler filling.R25H Direct Rovings made of Advantex® glass are also used in pultrusion or weaving-knitting processes under specific conditions; contact us for further assistance.