Products in Reinforcements: Structural Reinforcement

ZERO® Uni-4.31M7 is a patented non-woven fabric with a relatively small percentage of binder material (less than 3%). The binder is applied to only one side of the fabric resulting in virtually no crimp in the reinforcement fibers.

PLEXUS™ 54F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

GENESIS™ XF Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

Superior Huntingdon Composites M8635 is this reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and better porosity.

ZERO® Uni-Q-22.3SM is a patented non-woven fabric with a relatively small percentage of binder material (less than 3%). The binder is applied to only one side of the fabric resulting in virtually no crimp in the reinforcement fibers.

Kamenny Vek BCS 13-1/4”-KV05/1 is a hydrophilic sizing. Basalt chopped strand of this series disperses by filaments in water media. It is mainly recommended for wet laid nonwoven mats and veils production, as well as for concrete reinforcement.

3B Fiberglass DS 1128-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA.When molded this product exhibits outstanding dry mechanical proper-ties, excellent hydrolysis/glycolysis resistance, high heat aging resis-tance and no sensitivity to mold release agents commonly used, such as calcium stearate. It can also reinforce and offer excellent perfor-mances in all impact modified and flame retardant polyamide formula-tions. An innovative manufacturing technology provides DS 1128-10N chopped strand with an excellent strand integrity and bulk density. As a result this product exhibits ex-cellent feeding properties with very low fuzz generation.The product is also designed for use in pneumatic conveying system and high throughput compounding line.

QISO® LIM-52 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® LIM-52 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

ZERO® Uni-4.0SM is a patented non-woven fabric with a relatively small percentage of binder material (less than 3%). The binder is applied to only one side of the fabric resulting in virtually no crimp in the reinforcement fibers.

StructureWrap™ V2 190 UC is a proprietary high tensile strength, stitch bonded, unidirectional carbon fiber fabriccertified by ICC-ES as meeting building code requirements. The material is combined in the field utilizingStructureWrap™ V2 200 Epoxy to form a carbon fiber reinforced polymer (CFRP) laminate used to strengthenand/or upgrade structural elements.

PLEXUS™ 44F Synthetic Macrofibers are high tensile fibers manufactured from a blend of 100% virgin polyolefin resins. FABPRO’s PLEXUS™ Macrofibers meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”.

QISO® MIM-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® MIM-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

QISO® M-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® M-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

Superior Huntingdon Composites M8635D1 is this reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and better porosity.

400gsm Plain and Twill Weave Glass Fabrics are compatible with polyester, vinyl ester and epoxy resin systems. An excellent heavyweight structural fabric and ideal for stiffening molds.

StructureWrap™ V2 280 UG is a proprietary high tensile strength, stitch bonded, unidirectional EGlass fiber fabric certified by ICC-ES as meeting building code requirements. The material iscombined in the field utilizing StructureWrap™ V2 200 Epoxy to form a glass fiber reinforced polymer(GFRP) laminate used to strengthen and/or upgrade structural elements.

Kamenny Vek BCS 13-1/4”-KV13 is a hydrophobic sizing. It is recommended for different technologies of concrete/cement reinforcement.

QISO® HW-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® HW-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

3B Fiberglass DS 1135-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA. The product has been developed in order to help reinforced plastics to meet the requirements of the most common food contact and drinkable water norms (FDA, EC 10/2011, BfR and ACS).Its chemistry presents an excellent compatibility with flame retardant additives and impact modifiers.The performance in hydrolysis/glycolysis resistance is also very good.Therefore, the fiber is enhancing dry-as-molded and long-term properties, in a large range of natural and colored formulations.Finally, DS1135-10N is a multi-compatible chopped strand PA, with excellent strand integrity and bulk density.

StructureWrap™ V2 090 UC is a proprietary high tensile strength, stitch bonded, unidirectionalcarbon fiber fabric certified by ICC-ES as meeting building code requirements. The material iscombined in the field utilizing StructureWrap™ V2 200 Epoxy to form a carbon fiber reinforcedpolymer (CFRP) laminate used to strengthen and/or upgrade structural elements.

Zoltek has developed a new product and sizing chemistry for use in vinyl ester resin systems. Introducing Zoltek’s PX35 Vinyl Ester Compatible Tow product. This new product, based on our proprietary sizing chemistry, exhibits excellent adhesion to and compatibility with vinyl ester resin systems. Most carbon fiber products are used to reinforce epoxy resin systems. Recently, the demand has grown for a product and sizing chemistry that can be used in vinyl ester resins whether cured thermally or via room temperature infusion. When compared to Zoltek’s standard carbon fiber product, PX35 Epoxy Compatible Tow, the new vinyl ester compatible product has significantly higher interlaminar shear strength (ILSS) and transverse flexural strength TFS, which both measure and indicate fiber to resin matrix compatibility and adhesion, as well as, composite performance. Zoltek’s PX35 Vinyl Ester Compatible Continuous Carbon Fiber is manufactured from a polyacrylonitrile (PAN) precursor fiber. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user flexibility to design and manufacture composite materials.

StructureWrap™ V2 140 UG is a proprietary high tensile strength, stitch bonded, unidirectional EGlass fiber fabric certified by ICC-ES as meeting building code requirements. The material iscombined in the field utilizing StructureWrap™ V2 200 Epoxy to form a glass fiber reinforced polymer(GFRP) laminate used to strengthen and/or upgrade structural elements.

ZOLTEK PX35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. ZOLTEK PX35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. ZOLTEK quality focuses on spool to spool consistency yielding low coefficients of variation.

ZERO® Uni-9.0SM is a patented non-woven fabric with a relatively small percentage of binder material (less than 3%). The binder is applied to only one side of the fabric resulting in virtually no crimp in the reinforcement fibers.

QISO® H-59 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® H-59 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

GENESIS™ Fibrillated Fibers are manufactured from virgin homopolymer polypropylene resins, and meet the requirements of ASTM C1116/C1116M “Standard Specification for Fiber-Reinforced Concrete”, ASTM D7508/D7508M “Standard Specification for Polyolefin Chopped Strands for use in Concrete”, and the requirements of ICC ES AC32 Section 3.1.1 for plastic shrinkage reinforcement and 3.1.2 for shrinkage and temperature reinforcement.

QISO® L-52 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® L-52 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

QISO® HH-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® HH-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

Sylramic™ SiCFiber, Tow is supplied on 3 inch diameter cardboard spools. Lengths up to 800 meters (145 grams) are available. Tow length may vary depending upon availability and customer requirements.

Technobasalt® Fiber is a unique material that transfers the power of nature to new technologies!Basalt fiber is a piece of complex basalt fiber of fixed length. Depending on the customer’s requirements, basalt fiber can be supplied both in the form of crumbly monofilaments, and in the form of pieces of complex basalt fibers glued together.

Sylramic™ SiC Fiber, Woven can be readily incorporated into a variety of weaves, woven tapes, braids, etc. A network of U.S. contractors exists to respond to your exact needs. Contact COI Ceramics to discuss specifics and receive further information.

500gsm Unidirectional Glass Fabric, also known as EUD, or simply UD, is compatible with polyester, vinyl ester and epoxy resin systems. This heavy UD glass is ideal for structural reinforcement of highly loaded composite beams. Available in 1.3m wide and slit into narrower tapes.

3B Fiberglass DS 1125-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA.When molded this product exhibits outstanding dry mechanical properties and no sensitivity to mold release agents commonly used, such as calcium stearate. Its sizing has been designed in order to offer excellent dispersion properties. It can also reinforce and offer excellent performances in all flame retardant and impact modified polyamide formulations. Thanks to its very light color, this product can be used in any natural grade compounds without impacting the color of the final part. An innovative manufacturing techno-logy provides DS 1125-10N chopped strand with an excellent strand integrity and bulk density. As a result this product exhibits excellent feeding properties with very low fuzz generation.

TX-45™ is delivered on carrier film to stabilize +/- 45° fabric. TX-45 is offered in custom areal weights, including 196 GSM.

QISO® H-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient. QISO® H-48 is a quasi-isotropic fabric that is balanced in a single layer of the braid. It is stronger, lighter, and more efficient.

Superior Huntingdon Composites M8635D2 is this reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and better porosity.