Products in Reinforcements: Wind Turbine Blades

Boron Nitride NanoBarb™ BNNB-P-90A1 uses a proprietary, catalyst-free process, to manufacture an enhanced boron nitride nanotube called the Boron Nitride NanoBarbTM, with properties enhanced beyond typical nanotubes further making the NanoBarbTM a strategic component for improving advanced materials.

Superior Huntingdon Composites M8635 is this reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and better porosity.

Saint-Gobain Vetrotex America EC14-300 TD44C is a Vetrotex Direct Roving is a splice free single end roving made of E-Glass and is suitable for use in various textile technologies.

Carbon-Core M111E600 is Chopped Strand Mat.

Polyform Qu Adaxial is a quadaxial fabric with fibers aligned in four different directions 0°, -45°, 90°, +45°. Due to the strategic fiber alignment this product is often used in boat building and wind turbine blades.

468G roving is used in filament winding and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture multi-axial fabrics.

TG-24-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

3B Fiberglass SE 2020 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 2020 Direct Rovings made of Advantex® glass are specifically designed for the production of Non Crimped Fabrics. The sizing of SE 2020 Direct Rovings is specifically designed for excellent adhesion with epoxy resin systems. SE 2020 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths. The SE 2020 Roving is approved by Germanischer Lloyd for the use in wind turbine rotor blades. SE 2020 Direct Rovings made of Advantex® glass can also be used in prepreg, filament winding processes.

This is a family of con�nuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling proper�es and good weight uniformity.

Polyknit Easyflow Knitted Core is a warp knitted polypropylene fabric offering excellent flow media properties for advanced composite fabrication technologies including resin infusion and transfer molding processes.

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.

Carbon-Core M110E150-1T is Chopped Strand Mat.

Technobasalt® Roving is a bundle of continuous unidirectional complex basalt fibers. Roving has high natural strength, resistance to aggressive environments, long service life and excellent electrical insulation properties. In terms of its technical characteristics, basalt roving surpasses S-glass and E-glass in many respects, and is not much inferior to carbon. Basalt roving is extremely heat-resistant: the temperature range for long-term use is from –260°C to +680°C. It can withstand temperatures up to 1000 °C for a short time.

Superior Huntingdon Composites M8612 is continuous Filament Mat Designed for Matched Metal Die Molding.

3B Fiberglass SE 3030 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 3030 Direct Rovings made of Advantex® glass are specifically desi-gned for multipurpose applications/processes such as the production of Non Crimped Fabrics, prepreg, filament winding, pultrusion, etc. The sizing of SE 3030 Direct Rovings is compatible with multiple resins: i.e. polyester, vinylester and epoxies. SE 3030 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths.

Mafic Basalt Direct Roving 13 µm is a diameter for reinforcement of thermoplastic and thermoset polymers.

TG-11-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

TC-09-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

Style 1161 is 3.87 oz. per square yard (131 g/m2 ) plain weave fiberglass fabric.

TC-05-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

467W-2400 Twist‑free and alkali‑free direct yarn, suitable for weaving process, mainly used for PU Fan blades. Suitable for polyurethane resin ( PU ).

Carbon-Core M111E225 is Chopped Strand Mat.

Zoltek has developed a new product and sizing chemistry for use in vinyl ester resin systems. Introducing Zoltek’s PX35 Vinyl Ester Compatible Tow product. This new product, based on our proprietary sizing chemistry, exhibits excellent adhesion to and compatibility with vinyl ester resin systems. Most carbon fiber products are used to reinforce epoxy resin systems. Recently, the demand has grown for a product and sizing chemistry that can be used in vinyl ester resins whether cured thermally or via room temperature infusion. When compared to Zoltek’s standard carbon fiber product, PX35 Epoxy Compatible Tow, the new vinyl ester compatible product has significantly higher interlaminar shear strength (ILSS) and transverse flexural strength TFS, which both measure and indicate fiber to resin matrix compatibility and adhesion, as well as, composite performance. Zoltek’s PX35 Vinyl Ester Compatible Continuous Carbon Fiber is manufactured from a polyacrylonitrile (PAN) precursor fiber. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user flexibility to design and manufacture composite materials.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

TA-05-P is a Aramid fiber have one of the highest strength to weight ratio compared to other commercially available fibers. Aramid fiber properties depend on the manufacturing process and can vary quite a lot depending on the intended end use.

ZOLTEK PX35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. ZOLTEK PX35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. ZOLTEK quality focuses on spool to spool consistency yielding low coefficients of variation.

L900 is Multi-axial stitch felt. It is made of glass fiber untwisted roving laid in warp (0º), weft (90º) or diagonal (±45º) directions, or evenly spread glass chopped layers, stitched by polyester stitching threads. The weight is 200~2000g/㎡, and the width is 50~2600mm. Products are widely used in wind energy, boats, auto parts, construction engineering, medical equipment, sports and leisure and other fields.

TC-06-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

Superior Huntingdon Composites M8610 is continuous filament Mat Designed for Matched Metal Die Molding.

Superior Huntingdon Composites M8615 is Continuous Filament Mat Designed for Matched Metal Die Molding.

TC-03-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

Superior Huntingdon Composites M8643X5 is this is a family of continuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling properties and good weight uniformity.

Kamenny Vek BCF 13-150-KV42 direct is the newest modification of the KV12 sizing with improved performance and increased alkali resistance. Basalt roving of this series is mainly recommended for pultrusion technology and for processing into woven fabrics, UD tapes, multiaxial fabrics, prepregs and other products based on phenolic and epoxy resins.

UX-04-P is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.

Superior Huntingdon Composites M8643X3 is this is a family of continuous filament reinforcing mats designed for pultrusion processes. They are treated with a suitable bonding resin and coupling agent and have good handling properties and good weight uniformity.

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.