Products in Reinforcements: Prepreg Processing

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

AKSACA™ 12K A-45 is a High Quality Carbon Fiber.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

AKSACA™ 24K A-49 is a High Quality Carbon Fiber.

HexTow® PV42/850 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion. The unique properties of HexTow® PV42/850 fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

AKSACA™ 3K A-38 is a High Quality Carbon Fiber.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

HexTow® AS4C carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 3,000 (3K), 6,000 (6K) and 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in weaving, prepregging, filament winding, braiding, and pultrusion.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

HexTow® IMA carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging. The unique properties of HexTow® IMA fiber, such as higher tensile strength and modulus, as well as good shear strength, allow structural designers to achieve both higher safety margins for both stiffness and strength critical applications.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

Angeloni Group CBX-200 is a multiaxial reinforcement used in marine, automotive, sport and leisure, light aircrafts and Infrastructures.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

3B Fiberglass SE 2020 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 2020 Direct Rovings made of Advantex® glass are specifically designed for the production of Non Crimped Fabrics. The sizing of SE 2020 Direct Rovings is specifically designed for excellent adhesion with epoxy resin systems. SE 2020 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths. The SE 2020 Roving is approved by Germanischer Lloyd for the use in wind turbine rotor blades. SE 2020 Direct Rovings made of Advantex® glass can also be used in prepreg, filament winding processes.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

AKSACA™ AC 4101 CHOPPED FIBER is a High Quality Chopped Carbon Fiber.

Angeloni Group CBX-150 is a multiaxial reinforcement used in marine, automotive, sport and leisure, light aircrafts and Infrastructures.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

HexTow® AS4A carbon fiber is a continuous, high strength, high strain, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties, and is suggested for use in prepregging, filament winding, braiding, and pultrusion.

Angeloni Group GG 201 P is a carbon balanced fabric and is used in automotive, sport and leisure, light aircrafts.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

3B Fiberglass SE 3030 consist of conti-nuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. SE 3030 Direct Rovings made of Advantex® glass are specifically desi-gned for multipurpose applications/processes such as the production of Non Crimped Fabrics, prepreg, filament winding, pultrusion, etc. The sizing of SE 3030 Direct Rovings is compatible with multiple resins: i.e. polyester, vinylester and epoxies. SE 3030 Direct Rovings present high level of fatigue performances, supe-rior interfibre and interlaminar shear strengths.

Angeloni Group GG 160 NTFX is a carbon balanced fabric and is used in Infrastructures.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

HexTow® IM8 carbon fiber is a continuous, high performance, intermediate modulus, PAN based fiber available in 12,000 (12K) filament count tows. This fiber has been surface treated and can be sized to improve its interlaminar shear properties, handling characteristics, and structural properties. It is suggested for use in prepregging, filament winding, braiding, and pultrusion where additional strength and modulus are required over IM7.