Products in Reinforcements: Resin Transfer Molding (RTM)

Angeloni Group CBX-400 is a multiaxial reinforcement used in marine, automotive, sport and leisure, light aircrafts and Infrastructures.

LINCORE® FF UD 250 is a 100% flax fabric made of untwisted rovings.The molding can be realized by Infusion, Resin Transfer Molding, Resin Film Infusion Lay upThese fabrics are also availble as resin-impregnated reinforcements for high strength, toughness ans structural performance at low weight.

E-Fiberglass Warp Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Longitudinal (Warp Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high longitudinal and shear strength and stiffness, and some transverse strength. Ideal for laterally loaded panels with aspect ratio from 1 .5 to ∞. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.

DIAGONAP™ DX 4001 is a biaxial glass fabric comprising of two stitched plies. It has a total weight of 828 gsm. This reinforcement is primarily used in the Marine industry.

ROVIMAT™ 320P/300 is a 628 gsm stitched multi-layer product, comprising a 320 gsm fabric and a 300 gsm glass mat.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

G-PLY™ BX300S C4 is a biaxial +45°/-45° 332 gsm stitched glass NCF. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.

Polymat Free Flow – PP250 is a mechanically stitch bonded 3-dimensional reinforcement fabric consisting of a polypropylene needle bonded core sandwiched between two layers of chopped strand E-glass fiber.

Ecotechnilin L-FLAXDRY-BL200-30m² is a balanced fabric - 200gr of flax/m².

Muehlmeier E-CR glass mat - powder bonded consists of cut and non-oriented E-CR glass strands which have silane size. The binding of the strands amongst each other happens by a powder mat binder on polyester base which is easily soluble in styrene. Working happens in the well-known contact- and continuous processes. The mat is suitable for UP, EP and vinyl ester resins. Compared to E-glass E-CR glass has excellent resistance against chemical and thermal influences and also a higher dielectric strength.

Angeloni Group CBX-200 is a multiaxial reinforcement used in marine, automotive, sport and leisure, light aircrafts and Infrastructures.

Chopped strands or Chopped fibers made of FILAVA™ CS BSB3_011.06.IS65T.D fibers are designed to reinforce thermoplastics or thermoset composites and can be used for wet and dry fiber laying processes, compounding and injection molding (see ISOMATEX Sales department for more information).

ampliTex™ 5009 is a Non-crimp unidirectional flax fabric with fibers oriented at 0°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact.

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.

E-Fiberglass Welf Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Transverse (Weft Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high transverse and shear strength and stiffness, and some longitudinal strength. The combination of straight, non-woven fibers and high glass volume fractions give superior properties at lower weight. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.

Natex 2D 350 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Twill 3/3 Natex® Fabrics with Laize 1000 mm and as 350 g/m2.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

Ultra Fatigue was specifically developed for leaf springs in the passenger car and truck sectors. The unidirectional fabric saves up to 50% in weight compared to steel, boasts a longer service life and features outstanding fatigue properties. It is Processed using the RTM process, it can be used with epoxy and PU resins and is ideally suited for high volume production.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ROVICORE™ R 600/D3/600 is a reinforcement comprising a non-woven synthetic 180gsm core and two 600glass mats stitched one on each side of the core.It is used in closed-mold processes.

ROVIMAT™ 600P2/450 is a 1068 gsm stitched multi-layer product, comprising a 600 gsm fabric and a 450 gsm glass mat.

DIAGONAP™ DT 20.40.1.01 is a triaxial glass fabric comprising of threestitched plies. It has a total weight of 858 gsm. This reinforcement is primarily used in theMarine industry.

ROVICORE™ FR 450/D3/450 is a reinforcement comprising a non-woven synthetic 180gsm core and two 450glass mats stitched one on each side of the core.The special ROVICORE™ FR core, combined with suitable resins, provides fire-resistant properties for use in sectors such as construction and transport.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

C-TAPE™ U1000P 24K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1006 gsm. It is made using 24K HS carbon fiber. The binding provided by the weft, along with the addition of fine warp threads, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.

ampliTex™ 5031 is a Bidirectional fabric with fibers oriented at 0° and 90°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact. ampliTex® 5031 has a very good drapability and is ideal for complex shapes. High laminate stiffness is obtained due to the low crimp satin weave.

It is optimization of multiaxial fabrics (eMax) enables us to meet the high requirements of the Aerospace and Automotive industry with respect to quality and reliability, as well as the easiness of processing the material into parts.

ECCellent unidirectional fabrics ( eUD ) are our new premium brand in area of high performance undirectional reinforcement composites. eUD's can be characterized by their high quality , high surface coverage and high performance.