Products in Reinforcements: Vacuum Infusion Processing (VIP)

ARAMAT™372K/200 is a 578 gsm multi-layer stitched fabric combining a mixed glass/Kevlar® fabric and a fiberglass mat. Use of Kevlar® fibers helps to reduce the weight. ARAMAT™ is primarily intended for the shipbuilding industry.

Conformat N751 is a continuous strand, glass fiber reinforcing mat. N751 is a semi-porous mat most frequently used for structural strength in flat or slightly contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. N751 functions equally well as reinforcement in both Pultrusion and Continuous Lamination processes. With the addition of an optional extra surface veil, N751 provides an outstanding surface finish.

G-BOND 60P 40THC is a 60gsm thermoreactive glass mesh combined with a 40gsm EVA coating. G-BOND is used to stabilize core materials (balsa, PVC, PET).

DIAGONAP™ DX 4001 is a biaxial glass fabric comprising of two stitched plies. It has a total weight of 828 gsm. This reinforcement is primarily used in the Marine industry.

ROVIMAT™ 320P/300 is a 628 gsm stitched multi-layer product, comprising a 320 gsm fabric and a 300 gsm glass mat.

G-PLY™ BX300S C4 is a biaxial +45°/-45° 332 gsm stitched glass NCF. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra surface veil, N758XS provides an outstanding surface finish.

Polymat Free Flow – PP250 is a mechanically stitch bonded 3-dimensional reinforcement fabric consisting of a polypropylene needle bonded core sandwiched between two layers of chopped strand E-glass fiber.

Conformat N758 is a continuous strand, glass fiber reinforcing mat. N758 is porous, very conformable making it an excellent reinforcing mat for complicated contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. With the addition of an optional extra surface veil, N758XS provides an outstanding surface finish.

ampliTex™ 5009 is a Non-crimp unidirectional flax fabric with fibers oriented at 0°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

SAERcore® patented SAERTEX product consists of one or two layers of chopped strand mats (CSM) and an intelligent flow media. Our multiaxial technology is integrated in our product SAERcore MAX, which reinforces the fabric complex while keeping same cavity thickness.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

ROVIMAT™ 600P2/450 is a 1068 gsm stitched multi-layer product, comprising a 600 gsm fabric and a 450 gsm glass mat.

DIAGONAP™ DT 20.40.1.01 is a triaxial glass fabric comprising of threestitched plies. It has a total weight of 858 gsm. This reinforcement is primarily used in theMarine industry.

C-TAPE™ U1000P 24K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1006 gsm. It is made using 24K HS carbon fiber. The binding provided by the weft, along with the addition of fine warp threads, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

ampliTex™ 5031 is a Bidirectional fabric with fibers oriented at 0° and 90°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact. ampliTex® 5031 has a very good drapability and is ideal for complex shapes. High laminate stiffness is obtained due to the low crimp satin weave.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Superior Huntingdon Composites M8635D1 is this reinforcing mat is a continuous filament product which is treated with a suitable bonding resin and coupling agent for polyester and vinyl ester resins. It has good handling properties, porosity, and formability, resists wash in the mold, and has weight uniformity. Some variations include faster wet through and better porosity.

ampliTex™ 5051 is a Flax fiber braid, suitable for manufacturing fiber reinforced composite tubes with high performance and low environmental impact.

powerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weightpowerRibs material is designed for manufacturing fiber reinforced composite products with high performance and low environmental impact. This special fabric creates rib structure on one surface of the composite layer, significantly increasing the flexural stiffness and damping properties of thin composite shells with little additional weight

ampliTex flax-carbon fusion UD tape is a non-crimp, 120 mm width, 170 gsm

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

G-PLY™ BX468S T3 is a biaxial +45°/-45° 482 gsm glass NCF. The addition of threads at 0° and 90° increases the stablility of this reinforcement. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

Parabeam BV ParaTank create strong, lightweight structures without labor-intensive production. Drapeable when needed. Rigid when required.

LTM800/225i is a High-speed diversion fabric. The fabric specially designed for the closed-mold molding process, and the unique structural design, makes the product form a diversion channel after layering, which greatly improves the resin diversion and penetration effect, especially suitable for vacuum infusion process. The weight is 800~2400g/㎡, and the width is 50~3200mm. Mainly used in wind energy, shipbuilding and other fields.

ampliTex flax-carbon fusion UD tape, non-crimp, 52 mm width, 225 gsm.

ROVIFLOW™ 505T/NET1/300 (36) is 923 gsm stitched multi-layer product, comprising a 500gsm fabric, a 110gsm polyester flow medium, and a 300gsm mat. It is used for infusion processes without an additional external flow medium.

ampliTex™ 5040 is a Bidirectional fabric with fibers oriented at 0° and 90°, suitable for manufacturing fiber reinforced composite products with a high performance and a low environmental impact. ampliTex® 5040 has a very good drapability and is ideal for complex shapes. High laminate stiffness is obtained due to the low crimp twill 2/2 weave as well as zero-twist yarns.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

G-PLY™ Q972 T4 is a quadraxial 0°/+45°/-45°/90° 982 gsm glass NCF. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

G-PLY™ BX600S M225 T3 is a biaxial +45°/-45° glass NCF, stitched to a 225gsm mat, resulting in a total weight of 839 gsm. The addition of threads at 0° increases the stablility of this reinforcement. This multiaxial fabric is intended in particular for the Marine industry, primarily for infusion processes but also for HLU processes.

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.