Products in Reinforcements: Glass Fibers

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC900 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

HexForce™ 1568 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

ARAMAT™372K/200 is a 578 gsm multi-layer stitched fabric combining a mixed glass/Kevlar® fabric and a fiberglass mat. Use of Kevlar® fibers helps to reduce the weight. ARAMAT™ is primarily intended for the shipbuilding industry.

E-2LTI 7200 is a E-Glass fiber type.

1164-01: Unidirectional is a 12k Carbon Warp Yarn Fiber with Low Melt Fiberglass fill yarn having a Unidirectional Weave Style

E-glass 106 is also known as electrical glass—is the standard glass composition used for most glass fibers. It is made from the oxides of silicon, aluminum, calcium, magnesium, and boron.

HexForce™ 7626 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

HexForce™ 1188 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

3B Fiberglass DS 2200-13P is a 13 μm filament dia-meter, 4 mm long chopped glass fiber designed for production of Polyolefin compounds.DS 2200-13P shows outstanding compatibility with Polypropylene. This is the material of choice for very high glass content (up to 50 %wt) compound grades that require good fiber dispersion as well as mechanical properties. DS 2200-13P is also desig-ned for parts weathering in prolonged contact with water, detergents and glycol. DS 2200-13P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-13P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation.DS 2200-13P’s sizing chemistry also requires reduced amount of coupling agents so that parts reach optimum mechanical performances.

Owens Corning M130 chopped strand mat represents a general-purpose solution for open mold hand lay-up applications in a variety of industries. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of medium tex, chopped strands randomly dispersed and bonded together by a highly soluble polyester powder binder. Certified by Lloyd’s Register of Shipping (Pending).

E-Fiberglass Warp Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Longitudinal (Warp Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high longitudinal and shear strength and stiffness, and some transverse strength. Ideal for laterally loaded panels with aspect ratio from 1 .5 to ∞. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.

1143-02:Unidirectional is a 12k Carbon Warp Yarn Fiber with Low Melt Fiberglass fill yarn having a Unidirectional Weave Style

HexForce™ 1610 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

HexForce™ 7781 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

163gsm Twill Weave Glass Fabric, often known as Style 92110, is compatible with polyester, vinyl ester and epoxy resin systems. The twill weave offers excellent drapability over compound curvature. Often used as the surface layers on tooling applications to minimize surface fiber print.

Jiangsu Changhai Composite Materials CHOPPED STRAND MAT EMC300 is fine strand reinforcement material made from E-glass cut fibers laid in a random pattern and bonded with powder or emulsion binder. It is specially designed for hand lay-up and continuous laminating process. It is easy to handle and has excellent molding performance. Also, it has rapid resin penetration together with a fast strand wet out time. The mat also brings a highly translucent finished laminates. Also, the fine strand input makes the fiber prominence at the finished laminates surface extremely low. It is an excellent reinforcement material for translucent roofing panel, chemical storage tanks, FRPpipes, boat hulls and decks, truck body panel and so on.

Carbon-Core M111E300 is Chopped Strand Mat.

D2-440-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Conformat N751 is a continuous strand, glass fiber reinforcing mat. N751 is a semi-porous mat most frequently used for structural strength in flat or slightly contoured parts manufactured by Resin Transfer Molding (RTM), Compression Molding and Closed Mold Injection. N751 functions equally well as reinforcement in both Pultrusion and Continuous Lamination processes. With the addition of an optional extra surface veil, N751 provides an outstanding surface finish.

G-BOND 60P 40THC is a 60gsm thermoreactive glass mesh combined with a 40gsm EVA coating. G-BOND is used to stabilize core materials (balsa, PVC, PET).

1527 are pipes that move millions of gallons of fluids with aerospace applications that carry thousands of passengers. They also have trailers that move thousands of tons of cargo and also car parts that perform mile after mile.