Products in Surface Finishes: Vinyls, Vinylics & Vinyl Derivatives

Crestafix® 630PA is a pre-accelerated vinyl ester-based high-performance bonding paste. This product is a non-sagging, filled compound with high strength, specifically designed for the assembly and bonding of GRP moldings. Its applications include panels, inserts, internal frames, ribs, internal core materials, and composite constructions. This product provides high shear strength bonded joints without the need for mechanical fixings.

Polycryl Y-602HT Orange is a high temperature vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent high temperature specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Polycor® Tooling VE SP gel coats are specifically formulated with selected vinyl ester resins that exhibit high heat distortion temperature to withstand the repeated molding of FRP laminates. They provide a high gloss and hard durable surface. These tooling gel coats are ready to be sprayed after the addition of the proper amount of the appropriate of promoters, then the right amount of methyl ethyl ketone peroxide. Read application instructions carefully, because even though manufacturing precautions are used to make tooling gel coat, a misapplication of these products can produce unacceptable results.

Armorguard® 967 White have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.

Armorguard® 967 Black have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.

Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.

Polycryl PPS-B-630 Black is a refinishing vinyl ester tooling gel coat. These coatings are vinyl ester urethane hybrids with a unique low hap chemistry. They are MACT Compliant and meet current Federal regulations regarding emissions.

Our Vinyl Ester Barrier Coat was developed from special thixotropic vinyl ester resins. This coating acts as a barrier coat between the laminate and the gelcoat. This formulation provides superior osmosis resistance along with enhanced thermal and cracking resistance properties. Sogel’s Vinyl Ester Barrier Coats allow accelerating the cure and the demoulding time, while strongly reducing the risk of print through, orange peel and blisters on gelcoat surface.

Polycryl B-602HT Black is a high temperature vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent high temperature specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Polycryl C-501 Clear is a vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Polycryl B-501 Black is a vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Polycor® VE Barrier coat has been formulated as a barrier coat to reduce osmotic blistering, and as a print blocker, to provide a smoother gel coat finish. A number of benefits have been demonstrated, capitalizing on some of this product’s unique properties. Among these are: - less osmotic water blistering, - final pigmented material will provide a visual aid to see air bubbles during lamination, - improved cosmetics due to reduced fiber print-through and distortion do not use 957xk100 as a finish coat, because exterior durability is poor and will result in rapid chalking and fading. This thixotropic and accelerated material just requires the proper amount and type of methyl ethyl ketone peroxide catalyst to cure at room temperature. It should not be used at temperatures below 20°c.

Polycryl G-602HT Green is a high temperature vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent high temperature specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Our vinyl ester laminating resin was formulated with an epoxy vinyl ester polymer This gives it very good physical properties and a high resistance to corrosion and penetration of water. This resin is recommended for the manufacture of FRP structures of small to large size with high production rates at room temperature. It is formulated to cure at room temperature with methyl ethyl ketone peroxide.

POLYCOR® TOOLING VE PA NEUTRAL 0000 - A pre-accelerated gel coat based on Vinyl Ester unsaturated polyester resin. Cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

Polycryl PPS-G-620 Green is a refinishing vinyl ester tooling gel coat. These coatings are vinyl ester urethane hybrids with a unique low hap chemistry. They are MACT Compliant and meet current Federal regulations regarding emissions.

Polycryl PPS-Y-610 Orange is a refinishing vinyl ester tooling gel coat. These coatings are vinyl ester urethane hybrids with a unique low hap chemistry. They are MACT Compliant and meet current Federal regulations regarding emissions.

Polycryl G-501 Green is a vinyl ester tooling gel coat, acrylic modified formulation. These gel coats are formulated specifically to meet the stringent specifications of the Marine and Transportation markets. Polycryl gel coats are formulated for spray with standard pressure pot equipment or air assisted airless equipment. Please refer to the “Polycryl Tooling Gel Coat Application Guide” before applying these products. Unacceptable results can occur when used improperly.

Our high impact tooling gel coat was formulated from a special vinyl ester resin This in combination with high quality additives, providing extreme resistance to high deformation temperature (HDT), as well as optimal performance in repeated cycles of heating, and exposure to solvents and chemicals. Sogel formulated this gel coat to provide permanent surface gloss to the mold, allowing the manufacturing of several parts between polish/wax applications.

Polycor® 965 Neutral Base vinyl ester tooling gel coats are formulated specifically for mold making. These vinyl ester based products are MACT compliant and heat resistant to withstand repeated molding of FRP laminates. Polycor® 965 series vinyl ester tooling gel coats are formulated ready-to-spray after the addition of the proper amount of an appropriate methyl ethyl ketone peroxide catalyst. Polycor® 965 series vinyl ester tooling gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP for boat manufacturing and the reinforced plastics industry.