Products in Surface Finishes: Resins, Binders & Matrix Materials

Crystic® Fireguard Gelcoat 70PA is our market leading halogen-free fire retardant gelcoat. It has been specifically designed for very stringent fire approvals particularly requiring low smoke characteristics. It achieves TS45545 HL2 with Crestapol 1212 and has low surface spread of flame. It can also be used with standard polyester fire retardant resins.

Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.

Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.

Crystic® Transfer Moulding Resin 5008ST is a non accelerated orthophtalic resin designed for use by RTM (Resin Transfer Molding) techniques, with excellent mechanical properties. Its rheology makes it suitable to be processed by vacuum injection or wet press as well.

Crestafire® GCS 1001E is a non-accelerated, low-smoke, fire retardant intumescent polyester-based gel coat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Crestafire® GCS 1001 E forms a foamed cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard light grey color and is designed to be post-painted.

Crystic® Polyester Resin 199 is an isophthalic polyester resin recommended for use in high-performance applications where superior thermal and electrical properties are required. It has excellent chemical and heat resistance. This product can withstand long periods (1 year) at temperatures up to 150ºC, and shorter periods at temperatures up to 200ºC, with no serious loss of properties. It has a 30-minute gel time.

Crystic® Primecoat is a high build, polyester coating material which allows the rapid surfacing of patterns constructed from wood, MDF, GRP etc. It can be applied wet-on-wet up to a thickness of 1.5mm in one operation without sagging or draining from vertical surfaces. The material hardens rapidly and when cured can be easily sanded to a very smooth finish which can be polished to a surface glossy enough for many applications.

Crystic® Pipe Relining Resin PD10098T is a thixotropic, non-accelerated, high-reactive orthophthalic neopentylglycol unsaturated polyester resin. It is specially developed for the production of liners in the pipe relining industry. Fully cured laminates of this product offer high chemical resistance and mechanical properties, as well as excellent long-term property retention.

Crystic® Polyester Resin 702PAX is a pre-accelerated orthophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crystic® FR1166 PAK is a filled, orthophtalic, pre accelerated, low styrene content and thixotropic unsaturated polyester resin. It has to be used when excellent low smoke and fire resistant laminates are required. Crystic PD1166 PAK is halogen free and does not contain heavy metals.

Crestafire® P1-3002PA is a pre-accelerated polyester resin with fire retardant properties, which make it suitable for applications where fire resistance is a major consideration. It is suitable for RTM (resin transfer molding) and RTM light applications. It requires only the addition of a catalyst to start the curing reaction.

Crystic® Transfer Moulding Resin 781PALV is a pre-aceelerated, orthophthalic polyester resin, designed for use in RTM (Resin Transfer Molding) and RTM Light processes. It is especially suited to those RTM applications which require the addition of filler to the resin system.

Crestafire® P1-2002PA is a pre-accelerated thixotropic polyester resin with fire retardant properties, making it suitable for applications where fire resistance is a consideration. The product is suitable for spray and hand lamination application techniques. It requires only the addition of a catalyst to start the curing reaction.

Crystic® Polyester Resin 489PA is a pre-accelerated, thixotropic, isophthalic polyester resin. When used with Crystic® Marine Grade Gelcoats such as LS 88PA, LS 97PA, LS 30PA, LS 31PA, and Permabright, it gives outstanding durability and superior blister resistance for molding boat hulls. This product is suitable for use with continuous rovings, carbon fibers, and aramids. It has a 23-minute gel time, Lloyd's approval, and is suitable for marine, transportation, building and construction, and industrial applications.

Crystic® Pipe Relining Resin D3846SA is a thixotropic, non-accelerated, isophthalic, unsaturated polyester resin with low exotherm. It is specially designed for the production of liners to be used in the pipe relining industry. The fully cured liners offer high chemical resistance and mechanical properties.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® Very-Low Styrene Ecogel S3PA is a high performance isophthalic neopentyl glycol gelcoat. This gelcoat is pre-accelerated and formulated for spray application. Crystic Ecogel® S3PA is a low VOC product. Crystic Ecogel® S3PA has been specially designed for the production of high quality parts in the marine industry. This formulation offers an excellent hydrolysis resistance combined with a high gloss and gloss retention. Crystic Ecogel® S3PA has approval by the Lloyd’s Register of Shipping.

Crystic® Polyester Resin R115NT is a general purpose non thixotropic, non accelerated, orthophthalic, unsaturated polyester resin. It has a gel time of 10 minutes and can be used for the production of filled castings or for reinforced laminates on flat molds.

Crystic® Polyester Resin 625PA is a thixotropic, tough, pre-accelerated isophthalic polyester resin with good heat and chemical resistance properties. It can be used in filament winding applications and is ideally suited for the production of heat-resistant and dimensionally stable molds. This product has a 20-minute gel time.

Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.

Crystic® Orthophthalic Topcoat 407PA White is a pre-accelerated Flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. This product is pigmented using a highly UV resistant grade of titanium dioxide. It has been formulated for brush application.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Polyester Resin PDME 074 is an acrylic modified orthophthalic unsaturated polyester resin developed specifically for the manufacturing of maximum clarity roofing sheets by continuous sheeting process. It is ultra violet stabilized by the addition of special anti UV additives. The resin also contains acrylic monomers to reduce long term yellowing of the laminates.

Crystic® Isophthalic Brush Gelcoat 80PA is an isophthalic, industrial-grade, white-pigmented, pre-accelerated gel coat that is designed for hand lay-up. This product is most suitable for all general molding requirements. It has been designed for application by brush, which yields good coverage, flow, and leveling properties.

Crystic® Polyester Resin 1124PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give a sufficient pot life for contact molding using Andonox® KP9 at normal ambient temperatures. It has been formulated to give a rapid cure time while retaining a usable pot life and a normal peak exotherm temperature. For an extra-rapid cure, the use of acetoacetonyl peroxide (Andonox® PD40) is recommended.

Crystic® Polyester Resin 125PA is a quality orthophthalic-based unsaturated polyester resin developed specifically for the manufacture of GRP moldings. This medium-viscosity polyester resin meets the requirements of BS 3532:1990 as a type "A" resin and can be used for flat surface laminations. Laminates made with this product have good mechanical strength, high rigidity and impact resistance, and excellent dimensional stability. When used with the recommended curing system, its curing properties make it especially suitable for fast production processes.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Gelcoat 12PA is a pre-accelerated iso-NPG gel coat formulated for brush application. It has good heat and chemical resistance, making it suitable for preparing molds. This product is recommended for use in the production of sanitaryware and tooling products.

Crystic® Isophthalic Brush Topcoat 65PAX is a general purpose, brush isophthalic topcoat which cures tack free when applied to the reverse side of a laminate. It can be used in applications where the back surface of a polyester laminate needs to be given a gelcoat finish to improve aesthetics.

Crystic® Fire Retardant Resin U1007TPA is a filled, fire-retardant, pre-accelerated, thixotropic unsaturated polyester resin designed for RTM and RTM light. It cures with standard MEKP peroxide and has a 17-minute gel time. This product will achieve M2 to the French fire standard.

Crystic® Laminating Resin 471PALV is a pre-accelerated, low-viscosity polyester resin with rapid hardening characteristics. This laminating resin combines rapid impregnation of reinforcements and fillers with a very short mold release time and is suitable for hand-laying or spray applications. It has an 8-minute gel time, Lloyds approval, and is suitable for use in marine, transportation, building and construction, and industrial applications.

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Crystic® Low Styrene Gelcoat 76PA FR is a low styrene content, pre-accelerated, fire retardant gelcoat developed to have very low surface spread of flame. It has been formulated for brush application and can be used for building applications, vehicle bodies and general industrial work.

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Isophthalic Spray Gelcoat GT-1000 is a gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.