Products in Surface Finishes: Liners

Crystic® Pipe Relining Resin PD10098T is a thixotropic, non-accelerated, high-reactive orthophthalic neopentylglycol unsaturated polyester resin. It is specially developed for the production of liners in the pipe relining industry. Fully cured laminates of this product offer high chemical resistance and mechanical properties, as well as excellent long-term property retention.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® Pipe Relining Resin D3846SA is a thixotropic, non-accelerated, isophthalic, unsaturated polyester resin with low exotherm. It is specially designed for the production of liners to be used in the pipe relining industry. The fully cured liners offer high chemical resistance and mechanical properties.

Crystic® Polyester Resin 272E is an isophthalic polyester resin designed for use in hot climates. It is used in high-performance applications such as pipes, tanks, and ducting. This versatile resin is suitable for use in filament winding, pultrusion, centrifugal molding, or contact molding processes. It has a 25-minute gel time.

Crystic® Polyester Resin 1160PA is a general-purpose, thixotropic, pre-accelerated, very low styrene emission, orthophthalic polyester resin with low viscosity. It has a 25-minute gel time and is suitable for parts used in building and construction, transportation, and industrial applications. This product is a part of Scott Bader's Crystic® Green system.

Crystic® Laminating Resin 1122PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give sufficient pot life for contact molding using Andonox® KP9 catalyst at normal ambient temperatures. It is suitable for a wide range of applications. This product has been specially formulated to give rapid wetting and impregnation of reinforcements and to aid in the elimination of air. It is almost colorless when cured.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).

Crystic® Transfer Moulding Resin 782PA is an orthophthalic polyester resin, designed for use in RTM. It is a versatile resin, ideally suited to environments where heat and chemical resistance are both required. Crystic® 782 is a non-accelerated version of this resin.

Crystic® Polyester Resin 197M is a medium-reactivity, orthophthalic, unsaturated polyester resin with very high mechanical properties. It is suitable for pipe and tank manufacture. This product has an 18-minute gel time and functions as a resin, binder, and matrix material.

Crystic® Vinylester Resin VE673 is a low-viscosity, non-accelerated, non-thixotropic, high-HDT epoxy novalac vinyl ester resin with outstanding chemical resistance to a wide range of substances at room temperature and elevated temperatures. This product is suitable for laminating and filament winding. It has a 16-minute gel time and can be used for chemical resistance, building and construction, and industrial applications.

Crystic® Pipe Relining Resin 4044TV01 is a thixotropic, non-accelerated ISO/NPG unsaturated polyester resin with a low exotherm. It is specially designed for the pipe-relining market, with good chemical resistance and mechanical properties. This resin is suitable for polyester felt or glass fiber reinforcement.

Crystic® Polyester Resin 2.8500PA is a low-styrene emission, pre-accelerated, orthophthalic polyester resin that rapidly wets out reinforcements. It is a general-purpose resin that is suitable for non-critical and industrial applications such as liners, pipes, and tanks. This product has a 17-minute gel time.

Crystic® Resin 3454.4T AC01 has been designed for filament winding application but can also be used by hand layup or spray techniques. Its medium-to-high reactivity allows for a fast curing time, even on thin laminates. This resin is suitable for the production of glass-reinforced laminates when heat distortion resistance is required. Its high performance makes it particularly suitable for the production of oil tanks and pipes.

Crystic® Transfer Moulding Resin 5008ST is a non accelerated orthophtalic resin designed for use by RTM (Resin Transfer Molding) techniques, with excellent mechanical properties. Its rheology makes it suitable to be processed by vacuum injection or wet press as well.

Crystic® Polyester Resin 491PA is a pre-accelerated, thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It is versatile and suitable for performance boat hulls destined for use in warm or tropical areas. This product is also suitable for the manufacture of chemical plants, tanks, pipes, and chemical containers. It has a 12-minute gel time.

Crystic® Pipe Relining Resin PD10154I is a magnesium oxide thickenable, orrthophtalic neopentyl glycol, unsaturated polyester resin with UV photoinitiator. This product is specially developed for UV curing systems and the relining pipe repair industry. It has excellent mechanical properties, resistance to water ingress, and impact resistance.

Crystic® Vinyl Ester Resin VE671-03 is a bisphenol A epoxy based, vinyl ester resin. It designed for use in closed mold applications and centrifugal casting processes. It is recommended for the manufacture of fiber reinforced composite tanks, vessels, ducts etc. for use in chemical processing applications.

Crystic® Transfer Moulding Resin 785PA is apre-accelerated, DCPD based, polyester resin designed for use in RTM (Resin Transfer Molding). It has a lower styrene content than conventional RTM resins and can significantly reduce the occurrence of print through, to produce moldings with an enhanced surface finish.

Crystic® Polyester Resin 123PA is a medium-thixotropic, tropicalized, pre-accelerated waxed unsaturated polyester resin. This resin is specially formulated to provide rapid wetting and impregnation of the reinforcement. It is ideally suited for the building of boats, water tanks, bathtubs, shower trays, and other products where water resistance is an important factor.

Crystic® Thixotropic Resin VE676T is a thixotropic version of Crystic® VE676, an epoxy bisphenol A based vinyl ester resin. This product is suitable for hand lay-up, spray lay-up, and similar processes. Thixotropic additives provide applied material sag resistance to vertical surfaces. 

Crystic® High Performance Resin 3642.3 can be used by spray, filament winding, or hand layup. This resin can be used in many applications, but its high performance makes it particularly suitable for the production of oil tanks. Additionally, it can also be used for direct bonding on sanitary acrylic.

Crystic® Polyester Resin 198 is a medium-viscosity orthophthalic polyester resin with good heat and chemical resistance properties. This product was developed for use in the chemical industry (tanks, pipes, fume stacks, etc.), where heat and chemical resistance are both required, but it can also be used in industrial, transportation, and building and construction applications. It can be used with glass fiber-backed polypropylene and suitably treated uPVC. This product has a high HDT of 112°C and a 12-minute gel time.

Crystic® CiPP Resin D5101 is an unaccelerated, thixotropic, isophthalic polyester resin ideally suited for use in the production of liners for pipe relining. Thanks to Cured-In-Place-Pipe (CiPP) technology, this resin can be used to create a new pipe lining within an existing pipe structure, making it efficient and easy to use. Once fully cured, the laminates have good chemical resistance and mechanical properties, as well as long-term property retention. This resin is therefore ideal for heavy duty, high frequency, and industrial applications. This resin should be allowed to reach workshop temperature before use, at which point its gel time will be between 3 and 6 minutes. It requires the addition of a catalyst for the curing process to begin. However, further additives such as pigments and fillers may affect its natural properties, and their effects should be evaluated before use.