Products in Surface Finishes: Vacuum Bagging

Crestafix® B72R Bonding Paste is a polyester-based, MEKP catalysed core bedding compound, developed for both hand-layup and vacuum-bag core installation. It is used as a 2-part system in conjunction with a priming resin applied to the core surface. Lightweight and non-sagging, Crestafix® B72R is formulated to the degree of elasticity required for the core to skin interface.

AeroWindTech AWTNPP 204 is designed for vacuum bag lay-up composites, metal-to-metal bonding structures, and resin infusion layup processes. It is a white nylon with red tracers to prevent material being left behind. This Heat Set and scoured finish material is a 100% Nylon 6, 6 fiber and melts at approximately 419° F (212° C). This product is not recommended for phenolic systems. The fabric leaves a rough surface impression for priming and secondary bonding and is available in precision slit widths.

AeroWindTech AWTPP 103 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-103 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish.

Biresin® S19 is a Two component epoxy system, Component A epoxy resin, filled, black, Component B amine, unfilled, amber.

AeroWindTech AWTPP 106 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. The fiber is manufactured from 100% polyester and melts at approximately 480°F (249°C). The fabric leaves a rough surface impression for priming and secondary bonding. It is available in precision slit widths of 60 inches or less.

AeroWindTech AWTPP 605 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-605 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish.

AeroWindTech AWTPP 601 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-601 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish -N or the -SRG crosslinked Polymer for superb release.

Toray Toray Microply™ TC235SF-1 is a composite surfacing film designed to provide paintable composite surfaces off of the tool. It may be cured under vacuum-only pressure or under low autoclave pressure. The surfacing properties of Toray MicroPly™ TC235SF-1 allow smooth, paintable surfaces, even with thin-skinned honeycomb-stiffened composite structure. Epoxy Surfacing System 121°C–177°F (250°F–350°F).

AeroWindTech AWTNPP 589 is designed for vacuum bag lay-up composites, metal-to-metal bonding structures, and resin infusion layup processes. This Heat Set and scoured finish material is a 100% Nylon 6, 6 fiber and melts at approximately 480°F (249°C). This product is not recommended for phenolic systems. The fabric leaves a rough surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white Heat set finish -N or the -SRG Crosslinked polymer for superb release.

Biresin® S12 is a Two component epoxy system, Component A is S12, epoxy resin, filled, gray, Component B is a amine, unfilled, amber.

AeroWindTech AWTNPP 520 SRG is a high temperature Nylon release peel ply coated with a release agent. This fabric will provide ease of release while using most pre-pregs and resin systems and is specifically designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTNPP-520-SRG is produced from 100% nylon 6, 6 fiber and melts at approximately 480°F (249°C). This product is not recommended for phenolic systems. This fabric leaves a fine surface impression for priming and secondary bonding and is available in precision slit widths.

Biresin® S8 is a Two component epoxy system, Component A epoxy resin, filled, black. Component B amine, unfilled, amber.

AeroWindTech AWTPP 604 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. AWTPP-604 is produced from 100% Polyester fiber. The fiber melts at approximately 480°F (249°C). The fabric leaves a medium surface impression for priming and secondary bonding and is available in precision slit widths. This product is available in standard white heat set finish -N or the -SRG crosslinked Polymer for superb release.