Brands in Elastomers

For resin of artificial leather & synthetic leather-Top layer for moisture-permeable & waterproofing fabrics (resulting film has the excellent moisture permeability)

AFLAS® is a trade name for a fluoroelastomer polymer offering unique chemical resistance characteristics. Alpha Associates AFLAS® sheet material is recommended for fabrication into gaskets, seals, packings, washers, pads, shims, curtains, joints and other parts for use in severe operating conditions.

SILFAR® is the name of WACKER’s range of silicone-based products specifically intended for the pharmaceutical and food industries, as well as for use in fermentation and other biotech processes. SILFAR® products feature outstanding chemical resistance. They are not resorbed in the digestive tract, and are therefore not metabolized. They are colorless and odorless.

TYTAN™ TIPT/TNBT/TET/EHT process catalyst series are the world’s leading products of homogeneous esterification and transesterification catalyst to typical users in plasticizer, acrylate and methacrylate manufacturers. TYTAN™ AP series adhesion promoter is specially designed for flexographic and gravure printing ink for flexible packaging films to improve adhesion and heat stability. TYTAN™ CX series cross-linking agents are designed to impart a shear reversible or thixotropic structure to latex paint and dispersion paint. Other catalysts are designed for polyester esterification catalysts and polyurethane catalysts.

DAIFREE is based on the fluoro technology offering efficient demolding performances for elastomers and plastics. Besides high precision release, they contribute to solving molders productivity and consistency as they limit residue on parts, are applicable rapidly at a thin thickness and reduce mold cleaning cycles. Features of DAIFREE include Excellent mold releasing capability, Very thin, dry film of 0,1 – 1,0 μm thickness, Oil repellency, Stain-proofing properties, Improves molding efficiency, Lowers defect ratio, Improves molding precision and Continued releasing capability.

The Cri-Line® compounds described in this site are fully formulated high performance compounds, developed, tested and guaranteed by Cri-Tech, Inc. These Product Selection pages will enable you to quickly locate compounds that meet your specifications. Compounds are grouped by product type/families. Among them are products for most major FKM end-use applications and manufacturing processes. Cri-Line® FKM compounds range from 50 to 95 durometer, 65% to 71% Fluorine, bisphenol or peroxide cure system, and specialty grades such as BRE (base resistant) and low temperature. Compounds are generally supplied in several standard colors, but can be customized to support any color program. A Cri-Line® compound that you have ordered will arrive at your receiving dock accompanied by a certificate of compliance (including test data) for the lot shipped and ready for immediate processing without further modification.

ELASTOSIL® FX silicone rubber grades and additives allow to achieve realistic, impressive effects on the skin, in masks and in decorative uses. Film, theater and cosplay are possible areas of application.

Paracril NBR grades are produced by cold and hot polymerization process. The cold process yields linear polymers with good processing characteristics and solubility in polar solvents. The hot polymerization process leads to more branching. Branching in the hot Paracril grades is more developed in the higher viscosity grades. The hot polymers offer improved green strength. &rosslinNed 3aracril N%5 grades are unique in processing and function.

Produced at the highest quality, our Esters serve as versatile ingredients in your formulations. The product range includes emollients, skin conditioners, emulsifiers, stabilizer, opacifiers and viscosity modifiers.Our MASESTER™ Medium Chain Triglycerides are, next to it's use in personal care, great ingredients for flavor, food & beverage and pharmaceutical industry. The versatile oil with helath benefits functions as solubilizer, clouding agent, excipient and wetting agent.MASESTER™ Functional Products are: PHO-free (Partially Hydrogenated Oil), non-GMO and nonallergenic derived from sustainable palm oil grown within Musim Mas plantations.All products are HALAL and KOSHER certified.

ProFlex™ is a comprehensive range of medical grade Styrene Ethylene Butylene Styrene (SEBS) Thermoplastic Elastomers (TPEs) manufactured by Foster Corporation. These unique polymers offer excellent elastomeric properties, with superior design flexibility and ease of processing via injection molding and extrusion.

S.O.E.™ is a hydrogenated styrene butadiene block copolymer (SEBS) with special polymer structure. It is characterized by excellent damping property, low resilience, anti abrasion property, anti scratch resistance. It is also characterized by good compatibility to polar resins.

KRAIBURG continually tries to set new standards in technology, quality, manufacturing, delivery performance, customer relations and service. Highly customized and cost-effective solutions far exceed the current standards. KRAIBURG is the leading specialist for the development and manufacture of rubber and silicone compounds that fulfill the most stringent requirements.

The products in the Addisil brand portfolio are excellent candidates to consider when industries require high quality heat cured rubber (HCR) products. High mechanical performance, a broad range of durometers and one component ready to use options help make Momentive s Addisil line of HCR products a dependable and versatile brand.

Our Calcined Clay - Hyperlink 66 is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

Naxonac® products include anionic surfactants, one of the main advantages of phosphate esters is their stability and solubility in alkali systems. They can be used as hydrotropes to couple nonionic surfactants systems which are not soluble and at the same time increase wetting and detergency properties. The presence of the phosphate group imparts some interactions with metallic surfaces, thereby exhibiting some anti-corrosion and metal-adhesion characteristics. They can be used as additives in oil and water-soluble lubricant systems to improve lubricity, anti-frictional properties of the formula. Phosphate esters also find use as emulsifiers in emulsion polymerization.

A unique family of products that are developed using the highest quality raw materials and additives to create soft feel materials in a hardness range of 30–90 Shore A. Flextuff products are 100% recyclable. Product formulations are available for injection molding and extrusion processes. The unique properties of the Flextuff Series are ideal for applications in residential building materials and office furniture. Flextuff is available in a range of hardness levels, can be made in a variety of colors, is cost-effective and easy to process. Flextuff is designed for both injection molded and extrusion applications, and is a suitable replacement for flexible PVC in many cases. Unlike thermoset rubbers, Flextuff is not cross linked, thereby making it much more recyclable and easy to recycle. Another offering from Noble Polymers designed with sustainability in mind.

AWP TPE-S Elastex is the trade name of our Thermoplastic Elastomers. The Elastex qualities combine the rubber-elastic behavior of a rubber and a thermoplastic processing behavior. Elastex is manufactured on the basis of SBS or SEBS. Depending on requirements, the Elastex grades are available modified, including the following optimizations: UV stabilized, heat aging stabilized, slip and demoulding aids, adhesion-modified or vibration and impact absorbing.

Hydrogenated AcryloNitrile Butadiene Rubber (HNBR) properties depend upon the acrylonitrile content and the degree of hydrogenation of the copolymer. They have somewhat better oil and chemical resistance than nitrile rubber and can withstand much higher temperatures.

ELASTOSIL® is an all-rounder for countless applications. Silicone rubbers consist essentially of silicone polymers and fillers. They cure at high temperature (HTV/LSR grades) or room temperature (RTV grades) with suitable reactants, forming a three-dimensional structure and transforming the uncured compound in a plastic state into an elastomeric rubber. Silicone elastomers are flexible at low temperatures and resistant to heat and aging (UV radiation and ozone). They are easy to process and have good mechanical properties that remain unchanged over a wide temperature range. They have a neutral taste and are biologically unreactive.