Products in Elastomers: Filler

SIPERNAT® D 17 is a hydrophobic (i.e., not wettable by water) silica also used in defoamer.

HIFILL® Air Floated Clay Filler 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 3 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 10 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Casiflux M 50050 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Mistron® HYPERPLATE is produced using a proprietary delaminating process developed by Magris Talc which results in a highly lamellar talc compared with conventionally micronized grades. Mistron® HYPERPLATE enhances rubber compound barrier properties by restricting liquid and gas diffusion. It combines rubber reinforcement with processability, providing lower compound viscosity for improved flow in extrusion and molding applications. Mistron® HYPERPLATE is densified and has excellent flow properties for easy handling. It is a natural functional filler with a low environmental impact. 

Mistron® CB is a high-purity, platy, very fine talc that has been surface-treated with a proprietary silane coupling agent for rubber applications. Mistron® CB can be used in either sulfur or peroxide-cured formulations to improve modulus and compression set. The platy structure of Mistron® CB significantly enhances its barrier properties.

HIFILL® N 1200 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

SNOBRITE® Air Floated Kaolin is a crude, crushed, semi-dry kaolin that has been air floated. This natural ultrafine kaolin offers semi-reinforcing properties, good color quality, effective TiO2 spacing, and a cost-effective rheology modifier with inherent or natural plasticity and thixotropy. This product has a natural platy particle shape for semi-reinforcing properties and chemical resistance. It is an easy-to-disperse filler and is used as a rheology-control opacifier or TiO2 extension.

Magris Talc Galaxy 250 USP is a functional mineral that can be used in a range of applications such as industrial markets, food, and pharmaceuticals. Talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite make up the majority of its composition. The product is odorless and has a white or off-white to light gray color.

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Olympic H USP is a functional mineral that can be used in a range of applications such as industrial markets, food, and pharmaceuticals. Talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite make up the majority of its composition. The product is odorless and has a white or off-white to light gray color.

HIFILL® 1 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Casiflux A 5000 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Supra H USP is a functional mineral that can be used in a range of applications such as industrial markets, food, and pharmaceuticals.Talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite make up the majority of its composition. The product is odorless and has a white or off-white to light gray color.

HIFILL® N 1000 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

HIFILL® 2 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® N400 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

HIFILL® N 800 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

JetFil® M550 is a high-purity, platy, ultra-fine talc, which is recommended for improving stiffness, HDT, and dimensional stability in polymers. It can be used in polyethylene, polypropylene, and PVC-based applications to achieve maximum stiffness at loading levels up to 40% or higher. JetFil® M550 is available in densified form to improve feeding, enhance extrusion throughput, and reduce dusting.

HIFILL® N 200 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

HIFILL® 15 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Casiflux M 75 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Casiflux A 90 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

Casiflux A 7020 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Jetfine® 3CC is an off-white, high-purity, extremely platy submicron talc with an optimum aspect ratio and excellent top-size control. It is recommended for the best balance of stiffness and impact strength and to maximize HDT, dimensional stability, impact strength, and esthetics in high-performance plastics, as well as for nucleation, foamed plastics, and plastic films. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

HIFILL® 5 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

Supreme H USP is a functional mineral that can be used in a range of applications such as industrial markets, food, and pharmaceuticals. Talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite make up the majority of its composition. The product is odorless and has a white or off-white to light gray color.

Suprafino H USP is a functional mineral that can be used in a range of applications such as industrial markets, food, and pharmaceuticals. Talc (hydrous magnesium silicate), chlorite, dolomite, and magnesite make up the majority of its composition. The product is odorless and has a white or off-white to light gray color.

Casiflux CA 45 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

HIFILL® N 300 is a mineral additive that adds value to a wide range of plastic and rubber systems. It has better scratch and mar resistance, superior weatherability, and better fusion characteristics for PVC, among other benefits. HIFILL® N allows for formulation and processing cost reduction while not adversely impacting the products' physical properties and durability.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

HIFILL® 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 15 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.