Products in Elastomers: Blown Film Extrusion

PELESTAT 230 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property to polyolefin while causing practically no lowering of the physical properties of the resins themselves. It is particularly suitable for blown films and sheets of polyethylene (PE), and films and sheets of polypropylene (PP).

PELECTRON LMP-FS is an excellent dispersibility into PE and heat-sealing property. Low resistivity which is achieved surface resistivity range to 10^8-9 ohm/sq. Low dosage minimally affects the mechanical properties and moldability

PELESTAT LM230 is an excellent antistatic property independent of humidity-permanent antistatic agent for resins (preventing dust adhesion & troubles by static electricity, destruction of electronic circuit, electric shock & appliance malfunctions, etc. ) excellent dispersibility into PE and heat-sealing property low melting point.

PELESTAT 300 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded into the final product, using appropriate molders such as an injection molding machine, an extrusion molding machine and a calender, without a kneading process because this product exhibits excellent dispersibility in polyolefin.

Cromex PP-CG 50020 is used in blow molding, blown and cast film, injection molding, thermoforming and extrusion.

ISOTHANE 1680A-E3 are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.

MR-F 1200 is used in appliances, electrics & electronics ,consumer goods ,packaging.

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

Gaia® Antimicrobial AB 505 is an organic concentrate that helps to control or retard the growth of bacteria, fungus, and algae in plastic molded parts. Gaia® Antimicrobial AB 505 is a powerful additive concentrate produced in an LLDPE carrier resin for ease of dispersion. This product has been used in film, injection molding, and extrusion applications to control growth of bacteria, yeast, mold, and algae. In independent testing, Gaia® Antimicrobial AB 505 has been shown to inhibit ecoli and staphylococcus. A loading of 1.5% - 3% will protect plastic articles for an estimated 1 – 2 years. Recommended temperature range should not reach above 428°F.

Franplast Translucent USP Cl. VI is translucent SEPS based compound, perfect for medical applications. Without PVC and latex, biocompatible and without phthalates, it is a transparent and soft thermoplastic rubber, which represents an optimum alternative to silicone. It can be used for the realization of various soft touch components for medical use as injection ports, twist off closures, connectors, tubes for peristaltic pumps, joints, stoppers, gaskets, valves and membranes.

A-Len (Aleko Polymers) ANTIBLOCK АВ70TС is an antiblock masterbatch intended to create an air layer between the surfaces of the opaque sleeve film of LDPE and/or LLDPE at blow film extrusion to avoid its blocking.

M.G. Polyblends Anti Block Masterbatch consist of specialty organic and inorganic additives which migrates to the surface of the film forming the air cushion between film surfaces and thus preventing blocking without effecting film clarity.

ProFLOW 1000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

Javachem® GT-300 is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

ISOTHANE 1685A-E2 are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.

Franplast Special grade for film blowing is a TPE compound based on SEBS specially developed for film blowing of elastic films with layers of less than 100 μm (up to 50 μm). The opal/translucent compound can be enriched with gliding/release anti-blocking agents. Process setting and color methods are equivalent to PE film blowing. Our Chemiton for film is suitable for the production of elastic single-layer film for surgical drapes. We can also offer grades for improving the features of adhesive film in PE, especially for applications connected with baby and personal care (diaper and adult diapers).

ProFLOW 3000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

A-Len (Aleko Polymers) ANTIBLOCK AB20TY is an antiblock masterbatch intended to create an air layer between the surfaces of the opaque sleeve film of LDPE and/or LLDPE at blow film extrusion to avoid its blocking.

Polylink Polymers P-93010-UV is high molecular weight hindered amine light stabilizer (HALS) masterbatch based on polyolefins. It contains blends of stabilizers dispersed in the polymer matrix in the state of the art plant to give excellent performance in extreme climatic conditions.

Polylink Polymers P-93020-UV is high molecular weight hindered amine light stabilizer (HALS) masterbatch based on polyolefins. It contains blends of stabilizers dispersed in the polymer matrix in the state of the art plant to give excellent performance in extreme climatic conditions.

ISOTHANE 1685A-E are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.

ISOTHANE 1680A-E2 are polyether based thermoplastic polyurethane with good balanced qualities. They exhibit excellent high moisture vapor transmission. ISOTHANE® 1600 series can be processed by blown film extrusion.