Products in Elastomers: Foaming Agent

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

Ficel® HC AZ 40 is used as Flexible PVC, Rigid PVC, Polyolefin.

Polytrans AZODICARBONAMIDE is AC Blowing Agent/ Blowing Agent ADC.

TRACEL® TSE 7135 ACR is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

TRACEL® TSE 3140 ACR MICRO is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

TRACEL® DB 170 FINE is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Widely Use of polyester, polyurethane, polyvinyl chloride resins and polycarbonate, PA and other engineering plastics can also be used flame retardant fiber, wood and rubber and plastic products

VINYFOR AC#6-K6 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Hangzhou Hi-Tech Fine Chemical AC7000 plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

EIWA CHEMICAL FE-788 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Endex 4233™ is a high efficiency pelletized concentrate, in a thermoplastic polymer carrier. It is designed for use in both commodity and engineering plastics, and may be dried with the polymer if needed. It combines its endothermic properties, quality and efficiency, with versatility and cost-effectiveness.

Hangzhou Hi-Tech Fine Chemical RA is a high-temperature white foaming agent for polypropylene, rigid PVC, ABS, nylon, high density polyethylene, polycarbonate and other high-temperature foam products. P-toluenesulfonyl semicarbazide inorganic endothermic foaming agents in different ways and proportions compound can be produced Decomposition temperature range of absorption heat balance white foaming agent to adapt to a variety of soft, hard plastic and rubber and foam performance.

Cel-Span® CFA 200 is a 50% active Binary foaming agent specially formulated with activators and self-nucleating agents that contribute to uniform cell formation and smooth surfaces. CelSpan® CFA 200 concentrate releases mostly N2 and CO2 gasses upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, similar in color to endothermic chemical foaming agents. Cel-Span® CFA 200 is recommended for extrusion, injection, and structural molding of any kind of thermoplastics, except polycarbonate and thermoplastic polyesters.

Endex 1725™ is a 25% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Sinobase Polymers Chemical AC-01 is a slightly yellowish powder. Which is stable at room temperature and is soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination..

Ficel® Extend 49SBH73 is used as Rigid PVC.

Ficel® OB is used as Flexible PVC, Rubber/Plastisol.

Otsuka Chemical Unifoam AZ ultra #1195-I have been developed with powder technology and surface treatment technology to avoid caking and dust pollution. UNIFOAM AZ is the most widely used foaming agent for plastics and rubbers. We have recently developed UNIFOAM AZ ULTRA. This new foaming agent has perfect anti-caking qualities, is free flowing, and has a low percentage of dust.

VINYFOR DW#6 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Sinobase Polymers Chemical AC-03 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

Plastblow 60-9 PE is a blowing agent for cross-linked polyethylene foam.

Hangzhou Hi-Tech Fine Chemical HH130 blowing agent is artificial leather processing characteristics by careful modification of the AC blowing agent from leatherette special foaming agent for PVC artificial leather, foam. It can also be used for the production of soft PVC non-slip pad andsemi-PU leather foam soft PVC products for the production of the foaming agent has a good cell structure and good whiteness.

Ficel® HC 01 is used as Flexible PVC.