Products in Elastomers: Foaming Agent

MD SC-305F is a Blowing Agent Additive product. It is available in North America. MD SC-305F is compatible with Polyethylene or ethylene-olefin copolymer (PE).

TRACEL® DB 170 FINE is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

VINYFOR AC#93 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

NC blowing agent mainly used blowing agents for plastics and blowing agent for rubber, On PVC and PS profiles, plates, sheets of extrusion injection foam, such as blinds, picture frames and other low-foam plastic products, TPR soles and high-grade PVC injection slippers, sandals.

Fascom™ CS Plus is a highly activated ADC for PVCu and rubber processing.

Hangzhou Hi-Tech Fine Chemical AC7000 plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

TRACEL® DB 140 is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Plastblow 60-9 PE is a blowing agent for cross-linked polyethylene foam.

TRACEL® TSE 7145 ACR is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

New Particle Chemical Colors Corp. 7300 FOAMING PLASTIC MASTERBATCH is a most widely used Nitrogen foaming Masterbatch For Foamed Plastics. Foaming plastic masterbatch 7300 is particularly adapted for use in unicellular products where low gas loss be diffusion is required since it blows by releasing nitrogen.It is non-odorous in itself and imparts no odor to the finished products for which it is used and may be used in white or light colored compounds without the objectionable discoloration and staining obtained with many organic chemicals although it is a yellow pellet, the decomposition residue by heat is white. 7300 is broadly used blowing agent for most polymers processing, and should not be used with beryllium or copper tooling in injection molding structural foam.

Hangzhou Hi-Tech Fine Chemical RA is a high-temperature white foaming agent for polypropylene, rigid PVC, ABS, nylon, high density polyethylene, polycarbonate and other high-temperature foam products. P-toluenesulfonyl semicarbazide inorganic endothermic foaming agents in different ways and proportions compound can be produced Decomposition temperature range of absorption heat balance white foaming agent to adapt to a variety of soft, hard plastic and rubber and foam performance.

Cel-Span® CFA 899PS is a 20% active endothermic foaming agent concentrate recommended for extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrene, MPPO, and ABS. Cel-Span® CFA 899PS is recommended for extrusion, and structural foam molding of applications that require a very fine cell structure compared to a typical endothermic foaming agent in esthetic applications.

M.G. Polyblends RFM-50 has developed foaming agent masterbatch based on Exothermic blowing agent. This blowing agent is properly dispersed in a polyolefinic resin along with some specialty chemicals which helps in creating a very fine cell structure in Rotomolded LLDPE tanks. Since our Roto foam masterbatch is in pulverized form and hence there is saving in pulverization cost to our customer. A case study report is attached herewith for your reference and better understanding of our product.

Otsuka Chemical Unifoam AZ epitomizes Otsuka Chemical's organic temperature decomposition-type foaming agent, which is mainly composed of Azodicarbonamide. UNIFOAM AZ enables the foaming cell structure in plastics and rubbers to weigh less and thus offers a variety of functioning attributes, such as heat-insulation, flexibility, sound-proof, cushion elasticity, ornamentation, etc.

Sinobase Polymers Chemical AC-01 is a slightly yellowish powder. Which is stable at room temperature and is soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination..

Otsuka Chemical AZ H-115E is developed in order to solve these problems and to improve the overall efficiency of the foaming agent. Otsuka Chemical is ready to supply their variety of foaming agents for objected plastics, rubber, or ways of molding. Micro-fine foaming agent can easily worsen the working environment as well as making automatic weighing and supply difficult. Molding is also a concern in regards to worsening the foamed product.

Cel-Span® CFA 840 is a 40% active endothermic foaming agent concentrate, suitable for a variety of olefin resins such as polyethylene and polypropylene. Cel-Span® CFA 840 is recommended for extrusion, injection, and structural foam molding of polyolefins.

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

TRACEL® NC 135 XF is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

EIWA CHEMICAL FE-788 is type blowing agent and its compounds. Its unique minimum decomposition heat temperature characteristics and tan-free properties make it a favorite agent for plastic sheets with thickness.

Fascom™ RP Range is a modified and activated ADC for reduced plate-out.

MASTERFRAN® FM 05032 A is a TPE compund for caps and closures. It is designed specific materials for the cork industry: specifically, closures for wine, spirits and spirits. Our materials are easy to print, colorable, recyclable, phthalate free.

TRACEL® TSE 7135 ACR is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Hangzhou Hi-Tech Fine Chemical AC4000 is specially suitable for PVC extrusion and secondary high foam rubber and plastic free mode of foam and PEF; used in EVA MD injection, the size of the mold pressing, PE molded of PVC molding, coating and rubber molded foam, and rubbermolding and extrusion foaming. widely Use of high-grade EVA the MD shoe material, NBR + PVC insulation materials, seals and obturator leather.

TRACEL® TSE 3142 ACK is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Ficel® HRVP 01 is used as Rigid PVC.

Endex 1725™ is a 25% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Cel-Span® CFA 200 is a 50% active Binary foaming agent specially formulated with activators and self-nucleating agents that contribute to uniform cell formation and smooth surfaces. CelSpan® CFA 200 concentrate releases mostly N2 and CO2 gasses upon decomposition. This product is safe when used under the conditions of intended use. Upon complete decomposition (activation) of the C.F.A., the extruded and injected parts will become white, similar in color to endothermic chemical foaming agents. Cel-Span® CFA 200 is recommended for extrusion, injection, and structural molding of any kind of thermoplastics, except polycarbonate and thermoplastic polyesters.

Endex 100™ is a 100% active, free-flowing powder. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

Sinobase Polymers Chemical AC-02 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

Sinobase Polymers Chemical AC-05 is slightly yellowish powder. stable at room temperature. Soluble in alkali, insoluble in acid, pyridine, benzene, gasoline and water. There is no toxicity or contamination.

Endex NBC 2750™ is a 50% concentrate in a polymer carrier. It can be used in a wide range of commodity and engineering plastics, combining quality and efficiency with the benefits of versatility and cost effectiveness.

AC blowing agent chemical name is azodicarbonamide,it is light yellow crystal powder.Non-toxic, odorless, OF Gas evolution, easy dispersed in plastics and rubber, atmospheric foam andpressure foam can be applied.

Polytrans AZODICARBONAMIDE is AC Blowing Agent/ Blowing Agent ADC.

MASTERFRAN® FM 56002 A is a TPE compund for caps and closures. It is designed specific materials for the cork industry: specifically, closures for wine, spirits and spirits. Our materials are easy to print, colorable, recyclable, phthalate free.

TRACEL® G 5172 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.