Products in Elastomers: Release Agent

Changzhou Juyou New Material Technology JY201-125000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Schlicht Handelsgesellschaft A353 Release agent for elastomers is a semi-permanent, fast curing release agent for elastomers including EPDM, Nitrile and Neoprene . It creates a permanent yet removable thin non-stick coating on the mold surface for quick and easy part removal from the molds.

MoldWiz® 249-B41 is a liquid external release agent that dries at room temperature forming a monomolecular film which adheres by absorption to the mold surface and has no affinity for the molded resin or rubber. This selective adhesion prevents the film from being easily abraded by the demolded part. Numerous demoldings per application of release agent can be expected without any necessity for washing the parts. The release will not interfere with secondary finishing operations such as decorating, bonding, or painting.

Changzhou Juyou New Material Technology JY201-20 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Qingdao Zhongsu PE Wax H-22 is a polymerized type.

Econo-Spray® 3 Mold Release Spray (No. 40810P) contains a highly effective non-silicone release in a non-chlorinated solvent carrier system. This product is highly paintable, and will permit ultra-sonic welding of molded parts. It affords excellent release of all thermoplastics.

Bellflex Lube 2745 Completely Silicone Free is a hose lubricant Experts and it belongs to the Bellflex Lube range of mandrel lubricants that have been developed specifically for hose production. Bell Plastics Ltd manufactures only water-based mandrel lubricant/release products, avoiding the use of flammable solvents and causing environmental damage (VOC). We provide a service to determine the best lubricant for each hose/mandrel combination, which is important because tube compounds vary and behave very differently.

Schlicht Handelsgesellschaft A373 Release agent for fluoroelastomers is a semi-permanent, fast curing release agent for fluorocarbon rubbers such as Fluorel, Viton and other synthetic rubbers. It creates a permanent, yet removable, thin non-stick coating on the mold surface for quick and easy part demolding. With A373 you improve demolding even with complex shapes and under high loads.

IRRH Speciality Chemicals Zinc Stearate ISC-400 is biodegradable and non-toxic.

RP 23 - Lubricating viscosity modifiers for polypropylene that provide consistent melt flow change in both virgin and recycled materials. These multi-functional additives are formulated to meet the desired amount of melt change in a given range. Available with odor control additives incorporated as needed, as is the case with RP 23 and RP 38. RP 38 is designed to work well in contaminated mixed recycle streams.

Rikeizai O-498 can meet the exact requirements of our customers in manufacturing regarding the surface quality of molded products, reduction of piled materials on mold surface, and improvement in workability and offer Rikeizai O-498 for foam molding.

Slide Products Silicone Mold Release Agent (No. 40112N) keeps the most challenging parts from hanging up and stalling production. Extremely effective for injection and compression molding.

MoldWiz® WB-640ET - A liquid external release agent that dries at room temperature forming a mono-molecular film which adheres by absorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

McLube® 1700L is a PTFE dispersion with binding additives offering semi-permanent, non-transferring release characteristics. Ideal for injection molding. Silicone-free. Also, an excellent dry lubricant.

Tepe Kimya Li – 200 is an excellent mold release agent and also acts as a lubricant. It is suitable for high working temperature. It is very compatible with all rubber and plastic material.

XTEND® 19RBU - An air-drying reactive resin solution that cures to a cross-linked semi-permanent coating, which provides multiple release without transfer.

MATER 55 EHD is a stearic acid made from from tallow. Depending on the volume solicited, vegetable oils can also be used as raw materials.

MoldWiz® INT-PS125 - A process aid additive and mold release with anti-static properties which is incorporated directly into the resin eliminating the need for an external mold release agent. Improves resin flow and line speeds. An effective addition of process aid additive will not have any adverse effect on the cured resin. The complex polymeric nature of the process aid additive will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating.

MoldWiz® EM-1212 - A water-based external release agent that dries at room temperature forming a monomolecular film which adheres by adsorption to the mold walls and has no affinity for the resin. This selective adhesion prevents the film from easily being torn off by the demolded part resulting in numerous demoldings per release application without any necessity for washing the mold. Will not interfere with any secondary operations such as decorating, bonding, or painting.

Econo-Spray® 2 Mold Release Spray (No. 40710P) is a paintable release in a non-chlorinated solvent carrier system. It permits post-decorating of molded parts without prior cleaning.

SAK- LiS by Sun Ace is a lithium stearate. Acts as an acid scavenger, lubricant, mold release agent, extender and water repellent agent. SAK- LiS contains vegetable-based fatty acid and metal. Exhibits excellent lubricating and dispersing properties and stabilizing, hydrophobic and foam inhibiting effects. Used in plastics and rubber.

XTEND® 858 - An air-drying external mold release. It cures to a semipermanent coating, which provides multiple releases without transfer.

Eager Polymers EP7922 White Mold Release Paste Wax is a mold release agent for all the numerous and widespread applications currently used by carnauba wax. In the plastics industry, a film of carnauba wax may be used alone or superimposed by other compounds such as PVA (polyvinyl alcohol) as an excellent releasing agent for most jobs. However, there are different grades and colors of carnauba wax, whereas our white mold release wax EP7922 is pure white. This feature is of great importance to plastics manufactureres who cannot tolerate staining, discoloration or marking off of the cast piece.

Rikeizai M-975 can meet the exact requirements of our customers in manufacturing regarding the surface quality of molded products, reduction of piled materials on mold surface, and improvement in workability and offer Rikeizai M-975 for foam molding.

Qingdao Zhongsu PE Wax H-101 is a polymerized type.

McLube® 857 is a highly lubricious release emulsion in water. Ideal for epoxy and some polyurethane applications. Cured when dry at room temperature.

Stoner, Inc. E204 Light Duty Silicone Release - FG is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It produces a very light, dry mist coating which reduces over-application and buildup on molds.

Ease Release® 200 is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, polyurethane foam, epoxy resin, polyester resins, platinum silicones, rubber and thermoplastic polymers. Ease Release® 200 is effective on aluminum, chrome, platinum silicone, epoxy, rubber and steel molds.

Eager Polymers Polyvinyl Alcohol Release Agent (EP7930) PVA solution is a unique release agent composed of PVA (polyvinyl alcohol) resin in a water and alcohol solvent system. PVA provides positive release with excellent part finish for most resins, and in particular, in reinforced fiberglass production and FRP.

Qingdao Zhongsu PE Wax PE-6A is a polymerized type.

Stoner, Inc. E236 Urethane Mold Release is specially formulated as a release agent and anti-stick lubricant for molded urethanes. A light coating produces best results.

V-PETS - External lubricant for extruded profiles and molded goods.

Marbocote® 175HT is a releasing agent used in applications with hard to coat molds which has intricate detail or hard to reach surfaces.

MAGNESIUM STEARATE - A high purity stearate with a low soluble salt level that reduces discoloration during processing. It is an excellent dusting agent to prevent surface adhesion in ABS plastic and in other thermoplastics.

Rikeizai R-599 can meet the exact requirements of our customers in manufacturing regarding the surface quality of molded products, reduction of piled materials on mold surface, and improvement in workability and offer Rikeizai R-599 for foam molding.