Products in Elastomers: Ethylene Propylene Diene Terpolymer (EPDM)

Polymer-Technik Elbe EPDM - Elastomer Guideline TWK7534 has excellent ozone, aging and weather resistance which also has low pressure deformation residue even at high temperatures, very good resistance to hot water, hot steam, acids, alkalis and hydraulic fluids based on glycol water.

D50070 is a EPDM based compound that has chemical resistant,heat resistant, weatherable and UV resistant

Climarub 0.7 is our new rubber material developed to reduce the environmental impact. It can replace traditional EPDM rubber resulting in considerably lower CO₂ emission. Technically, Climarub performs just as well as traditional EPDM rubber.

JSR EP96 is high filler loadingoil extended EPDM.

D10070 is EPDM based compound that is medium hard with dimension stability.

General Purpose, Ethylene Propylene Terpolymer (EPT) 75-85 IRHD. Terpolymer of ethylene, propylene and diene monomers. To meet Aerospace specification DTD 5597A Grade 80. ASTM & ISO designation = EPDM.For sealing applications where good fluid resistance and low compression set are of prime importance. For continuous and/or intermittent use in contact with phosphate ester or silicone hydraulic fluids within the temperature ranges as quoted. Suitable for applications in contact with air, this material has excellent resistance to ozone. Unsuitable for use in contact with fuels, mineral oil based and diester oils and silicate fluids or greases derived from these.

G&E 254 is produced from feedstocks carefully selected for uniform viscosity, ethylene propylene ratio, and 3rd monomer. The feedstocks are chosen to produce a blended EPDM Polymer which has a medium ethylene content, medium diene content, and low mooney. G&E Blended EPDM 254 can be blended with prime EPDM polymers to reduce compound costs in extruded, calendered and molded applications.

Coruba Coru1456 Black 100% High Grade EPDM Rubber 60° shore is a High Grade EPDM suitable for use in applications where good weather and ozone resistance is required, also suitable for some mineral oils. This sheeting is manufactured from top quality virgin materials and ingredients meeting high standard of performance.

E70Q is a peroxide-cured, Ethylene Propylene Terpolymer material suitable for use in all types of applications requiring FDA, USP and 3A compliance. It is suitable for use in all food contact applications including dry, aqueous and fatty* media. E70Q provides excellent water and steam resistance and is widely used in equipment associated with the production of foodstuffs intended for human consumption and biomedical applications. Available in any sized O-ring (fully molded up to 2.5m/8ft internal diameter), gaskets and custom designed components.Key Attributes FDA compliant - extraction tested to CFR 21 § 177.2600 (e,f) USP Class VI <88> and USP <87> compliant 3A Sanitary Standard 18-03 Class 2 compliant Free from Animal Derived Ingredients (ADI) Typical ApplicationsRecommended for use in food, dairy, biomedical and pharmaceutical applications. O-rings Gaskets Hygienic/sanitary couplings & pipe connectors Valves Pumps Metering equipment

Coruba Coru204 Black Non-Reinforced Diaphragm 100% Premium Grade EPDM 60° shore is a high grade non reinforced diaphragm EPDM rubber sheet, offering excellent resistance to weather and ozone.

FullForce™ EPDM with Secure BondTM Technology is the next generation of self adhered roof system application. Secure Bond Adhesive is factory applied which ensures uniform adhesion across the entire membrane, even through the seam, creating a powerful bond with the substrate and overlapping seam area. This advanced technology not only improves installation speed over traditional fully adhered applications, but also widens the installation window with the ability to be installed from 20 °F (-7 °C) to 120 °F (49 °C). With no VOCs emitted during field membrane application, FullForce EPDM with Secure Bond Technology is a reliable solution for all your fully adhered roofing needs.

Colmant Coated Fabrics Epdm Rubber Sheet is a copolymer of ethylene and propylene and a smaller amount of a diene monomer which forms chemically unsaturated ethylene groups pendant from the main saturated chain. These facilitate cross-linking reactions which do not affect the integrity of the polymer backbone. This feature gives EPDM excellent heat, ozone and chemical resistance. Physical properties are very good and resistance to polar fluids is generally good. Low temperature resistance is very good and EPDM can be compounded to give excellent electrical resistance.

Polymer-Technik Elbe EPDM - Elastomer Guideline TWK5813 has excellent ozone, aging and weather resistance which also has low pressure deformation residue even at high temperatures, very good resistance to hot water, hot steam, acids, alkalis and hydraulic fluids based on glycol water.

Coruba Coru176 Black EPDM Flame Retardant Sheet 60° shore is a high grade flame retardant EPDM compound meeting and passing the test requirements of American standard UL94-VO test rating. Flame Resistance to DIN75200 -UL94VO – PASS.

Polymer-Technik Elbe EPDM - Sulfur TWK8684 has excellent ozone, aging and weather resistance which also has low pressure deformation residue even at high temperatures, very good resistance to hot water, hot steam, acids, alkalis and hydraulic fluids based on glycol water.

RubberGard™ Fire Retardant (FR) EPDM Membrane is a non-reinforced, cured, single-ply roofing membrane that can be used in ballasted, fully adhered and mechanically attached systems.

Climarub 1.3 is developed to reduce the environmental impact. It can replace traditional EPDM rubber resulting in considerably lower CO₂ emission. Technically, Climarub performs just as well as traditional EPDM rubber.

KEP® 070P produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

RubberGard™ EcoWhite Platinum™ EPDM Membrane is a 0.090" (2.29 mm) non-reinforced, bi-laminate, white-on-black, cured single-ply roofing membrane that can be used in fully adhered Firestone Roofing Systems.

American Biltrite AB-566 (FDA) is a Ethylene Propylene (EPDM) Polymer.

A DCPD Polymer for Electrical Insulation and Blends for Tire and Inner Tube Applications

D50050 is a EPDM based compound that has chemical resistant,heat resistant, weatherable and UV resistant

J. Allcock & Sons EPDM Crumbs is produced by the ambient grinding of EPDM waste / scrap material. EPDM is a rubber made from either a co-polymer of ethylene and propylene – which will be peroxide cured, or a ter-polymer which has a small amount of an unsaturated polymer added – this will be sulfur cured. The two different types are rigorously segregated, both as scrap and as finished crumb (or granules).

Seals Eastern Compound 7204 is 87-duro EPM.

Interep 79-2 EPDM Standard cellular rubbers have an excellent aging resistance, a good temperature resistance range and good compression sets.

Da/Pro Rubber EPDM are not exposed to oils, gasoline, kerosene, aromatic and aliphatic hydrocarbons, halogenated solvents, and concentrated acids are ideal for EPDM rubber gaskets. EPDM rubber is often used in weather seals, and as a source of noise reduction in the automotive industry. EPDM is an excellent source for gaskets or gasket sealing against atmospheric conditions such as sunlight, ozone, wind and rain. EPDM rubber can withstand temperatures ranging from-50°C to 150°C.

An Excellent Low Viscosity Polymer for High Quality Mechanical Goods

KEP® 2060 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

Detectaseal® XE7H is the latest advance in contamination detection and containment. This unique range of metal detectable elastomer compounds has been developed specifically to meet the stringent demands of the pharmaceutical and food processing industries.The Detectaseal® fragments as small as 2-3mm can be easily identified by in-line metal detection equipment used to detect product contaminated by process lines.The Detectaseal® range includes Nitrile, Silicone, EPDM and Fluoropolymer (FKM) elastomer compounds (all FDA-compliant) available in blue and black, which allows the most appropriate material to be selected for every application.Detectaseal® compounds can be molded into O-rings and custom components.Key Attributes Early detection and containment of contamination: Reduced product loss, Increased productivity Blue seals to assist in easy identification Excellent mechanical properties and sealing efficiency Exceptional oil and heat resistance FDA-compliant elastomer materials Free from animal-derived ingredients Typical Applications Static and dynamic sealing applications Food processing equipment Pharmaceutical drug manufacturing equipment Bioscience industry.

Royaltherm 1411A is a modified EPDM with a special silicone rubber. Royaltherm 1411A is supplied as a base compound that can be vulcanized with peroxides or sulfur/accelerator systems. Royaltherm 1411A is 30 - 40 Durometer when vulcanized with 1.8 phr of dicumyl peroxide. It can be blended with Royaltherm 1721 for intermediate hardness applications. Royaltherm 1411A is recommended for applications that require lower tensile strength than Royaltherm 1721. Royaltherm 1411A is also recommended for applications that require retention of mechanical strength at elevated temperatures, weather and moisture resistance, electrical stability and compression recovery at low temperatures.

CHANNEL RUBBER STRIP is a commercial grade black EPDM channel.

Unirubber EPDM Recycled Retardant Granules is a infill granule for artificial (synthetic) turf on indoor and outdoor playing fields.

An Excellent Polymer for Hose and Extruded Profiles

Interep 77-2 EPDM Standard cellular rubbers have an excellent aging resistance, a good temperature resistance range and good compression sets.

KRAIBURG EPDM is a ethylene-propylene-diene rubber used in applications such as seals for windows and doors, hoses for washing machines, dishwashers and water fittings, cable insulations and cable sheathings, use in drinking water, use in seal and control applications.

EB 1001 is a Ethyle Propylene Diene monomer with wire mesh. 125” Single Ply Aramid Inserted EPDM Belt[Press/Roto Cured].