Products in Elastomers: Liquid Silicone Rubber (LSR)

Silopren™ LSR 2345/06 is a electrically conductive two-component liquid silicone rubber for injection molding processes.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2345/06 TP 3585 are distinguished by the following properties: electrically conductive excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties outstanding resistance to aging not readily combustible, does not melt or drip Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2345/06 TP 3585 is particularly suitable for the following elastomeric articles: electrodes, field control elements, cable terminals, cable connectors, high voltage plugs, sealing elements s.o.

Silopren™ LSR 3786/20 is a two-component liquid silicone rubber for injection molding processes. This material is an excellent candidate to consider for the manufacture of elastomeric articles requiring self-lubricating properties. The self-lubricating effect is achieved by a fluid which exudes out of the vulcanizate over an extended period of time. It starts typically between a few hours and one day after vulcanization. Silopren™ LSR 3786/20 liquid silicone rubber shows a low compression set after vulcanization without post-curing.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 3786/20 liquid silicone rubber are typically distinguished by the following properties: low compression set without post-cure self-lubricating properties low viscosity fast cure high thermal stability outstanding resistance to aging easy to color Potential ApplicationsBecause of the outstanding properties, Silopren™ LSR 3786/20 liquid silicone rubber is an excellent candidate to consider for use in wire harness applications for the following elastomeric articles: cable seals mat seals grommets gaskets plug seals.

ZA 22 WT3 Spray is a addition silicone (PLATINUM curing agent) which has the product have to be used by spray. Ideal for vacuum bagging or for impression of vertical surface. It appears in light blue color and used in vacuum bagging.

Silopren™ LSR 2750 TP 3824 is a two-component liquid silicone rubber for injection molding, which offers primer-less adhesion to a wide range of substrates including metals and engineering plastics, but without adhesion to the mold. Full bond strength is reached after a short post cure (e.g. 1 h at 100°C) or by longer storage at room temperature. This makes Silopren™ LSR 2750 TP 3824 the optimal choice for cost-efficient manufacturing of high numbers of articles in integrated processes such as multi-component injection molding or insert-molding.Key Features and Benefits Primer-less adhesion to many substrates No special mold treatment needed: Final adhesion builds up with time High temperature stability Excellent stability and flexibility at low temperatures Outstanding aging behavior and weathering resistance Good dielectric and mechanical properties Easy pigmentable due to translucent color Potential ApplicationsSilopren™ LSR 2750 TP 3824 is particularly suitable for the manufacturing of parts, where engineering plastics and elastomeric materials need to be combined in an overmoulding or co-molding process such as sealing elements, automotive connectors, membranes, vibration dampening elements, etc. Parts made from Silopren™ LSR 2750 TP 3824 can generally be used in technical applications without post-cure, but do not comply with regulations applicable for parts, which are intended for the pharmaceutical or food industry.

Zhermack ZA 35 Mold is a addition silicone (Platinum curing agent) which has low viscosity, dimensional stability, precision in reproduction. It appears in yellow color and used in mold making.

Wynca XHG-6300 is a two-component liquid silicone that cures to form soft and gel-like elastomer with self-repairing effect. This material provides excellent protection of electronic assemblies from external shock and vibrations and allows in-situ repairing of electronic assemblies. It can also be used as the filling material for biomimetic subcutaneous tissues.

Zhermack ZA 22-45 Mold Neutro has low viscosity, high mechanical resistance, dimensional stability, precision in reproduction.

Silopren™ LSR 4040 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4040 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4040 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4040 is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters, parts for medical technical equipment, mats s.o.

Da/Pro Rubber LSR is the material used in our proprietary liquid injection molding (LIM) process. LSR produces medium to high volume rubber parts more efficiently and economically than other rubber molding processes.

Silopren™ LSR 4030 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4030 can be used to produce medical technical articles with high transparency and excellent rubber like properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4030 are distinguished by the following properties: high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylen oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4030 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, diaphragms, bellows, catheters, baby teats, respiratory devices, vibration dampers, mats, parts for medical technical equipments.

Goodyear Rubber Company of So. California Silicone rubber is an elastomer different from other rubbers in that it has an inorganic backbone made of silicon and oxygen atoms. Organic rubbers have a carbon-carbon chain atomic structure. The outstanding physical property of silicone is its’ retention of flexibility and tensile strength at relatively high and low temperatures, from -150 F to 600 F. Silicones are very flexible due to large bond angles and bond lengths compared to basic organic polymers. Silicone rubber is a material of choice where retention of shape and mechanical strength are desired under heavy thermal stress or sub-zero temperatures. Silicone rubber is highly inert and does not react with most chemicals and due to its structural properties, it is widely used in aircraft engine parts, door and window sealing parts, healthcare and medical applications including implants.

TC-5015 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. When used to make molds, the TC-5015 A/B is translucent enough to see through when casting into the mold cavity. This aids in developing void free surfaces on the casting. TC-5015 A/B is also commonly used to make ink stamp pads as well as other types of pressure pads.

Poolkemie SILIMOLD AL 25 is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST S o SN, according to the polycondensation process.SILIMOLD AL-25 silicon rubber is characterized by its medium-low hardness and a high tearing resistance. Thanks to these properties, it may also be utilized in the manufacture of molds with many undercuts.

Silopren™ LSR 2530 is a two-component liquid silicone rubber especially developed for the coating of textiles and glassfibre fabrics.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2530 are distinguished by the following properties: low viscosity excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties long service life at dynamic stress high stability to ozone and ultraviolet light outstanding resistance to aging excellent dielectric behavior over a wide range of temperatures not readily combustible, does not melt or drip easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2530 is particularly suitable for the following applications: textile coating for protective suits or conveyor belts, coating of glasfibre fabric sleeves, coating of fabrics for compensators, tents and other technical applications s.o.

Poolkemie SILIMOLD HT 60 SILIMOLD HT 60 is a high hardness poly condensation silicone rubber (60 shore A). fluid owing to its high temperature resistance it is suitable for building flexible simple mold for the reproduction of small sized low-melting point alloy objects, lead or tin.

ZA 00 Translucid is addition silicone (PLATINUM curing agent) which has softness, good mechanical properties, isolating and dumping properties, Its Color is translucid and used in podiatry, special applic.

LIM™ 6040-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6040-D2 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds The combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Silopren™ LSR 2670 is a two-component liquid silicone rubber for injection molding processes. In comparison to Silopren™ LSR 2070, Silopren™ LSR 2670 shows a lower viscosity, improved tear resistance and a higher reactivity. Therefore, it is also possible to reduce the vulcanization temperature while maintaining a standard crosslinking rate. The increased reactivity does not affect the properties of the vulcanizate.Key Features and BenefitsVulcanizates of Silopren™ LSR 2670 are typically distinguished by the following properties: High reactivity, lower viscosity, shorter cycle time Excellent thermal stability Biocompatible Sterilizable with ethylene oxide, steam and gamma radiation High stability and flexibility at low temperatures Good rubber-like properties, high tear resistance Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily pigmentable with LSR color pastes KTW approved Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2670 is an excellent candidate to consider for the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Vibration dampers Pressure cookers parts Spark plug boots, catheters, parts of medical technical equipment s.o.

Silopren™ LSR 4070 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4070 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4070 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4070 is particularly suitable for the following elastomeric articles: sealing elements, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

Wynca XHG-6330 is a two-component, low viscosity liquid silicone rubber designed for electric and electronic potting. It is flame retardant and provides good dielectric property and excellent resistance to temperature extremes.

Silopren™ LSR 2730 by Momentive Performance Materials is commonly used as Molding Resin for a variety of applications.

Silopren™ LSR 2752 is a two-component, selfbonding liquid silicone rubber for injection molding processes showing primerless adhesion to a wide range of substrates (e.g. engineering plastics, metals) without adhesion to the mold during manufacturing.Key Features and Benefits primerless adhesion to many substrates without necessity of any special mold treatment high thermal stability excellent stability and flexibility at low temperatures long service life at dynamic stress good rubber-like properties high stability to ozone and ultraviolet light outstanding resistance to aging excellent dielectric behavior over a wide range of temperatures not readily combustible, does not melt or drip easy-pigmentable with LSR Color Pastes Potential ApplicationsDue to the selfbonding properties Silopren™LSR 2752 is the optimal choice for the production of multi component articles in a cost efficient integrated process (multi component injection molding, overmoulding). Because of the outstanding properties Silopren™LSR 2752 is particularly suitable for the manufacturing of soft/rigid combinations out of engineering plastics and Silopren™ LSR e.g. sealing elements, membranes, shower heads or wherever a gasket is needed on a thermoplastic substrate.

Silopren™ LSR 2070 is a standard two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties it can be considered for use in a wide range of applications.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 2070 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2070 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Bellows Vibration dampers Pressure cooker parts ... and many more.

Silopren™ LSR 7080 J by Momentive Performance Materials is commonly used as Molding Resin for a variety of applications.

LIM™ 6010 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LIM6010 elastomer is clear, but easily pigmentable with Momentive masterbatch colors. The combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications as corn pads and heel inserts, where 'soft touch' sensory characteristics are important. LIM6010 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and Benefits Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Outstanding Thermal Cycling Performance Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in such consumer goods applications, where 'soft touch' sensory characteristics are important. Corn Pads Heel Inserts.

ZA 35-15 GLASS is a addition silicone (PLATINUM curing agent) that is liquid and transparent,

XTX 45 DRY is a addition silicone (PLATINUM curing agent) which has high transparency adapt for rapid prototyping, high mechanical properties. Two version: DRY and OIL BLEEDING (suggested for the resin). It appears trasparent and used in rapid prototyping.

ZAX 60 is a addition silicone (PLATINUM curing agent) which has good mechanical resistance against epoxy resins, PU resins, Polyesther resins and PU foam, It appears in blue color and used in mold making.

ZC 20-120 is a Condensation silicone (TIN curing agent) which has low viscosity, high mechanical resistance. It appears in whitish color and used in mold making.

Da/Pro Rubber Conductive Elastomers are rubber compounds that have been specially compounded and modified to make the rubber electrically conductive. The level of conductivity of rubber ranges from Insulative to Antistatic to EMI/RFI Shielding to Highly Conductive. The base polymer is an insulating material. Ingredients added to make a rubber compound effect the level of conductivity.

It is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST B*, according to the polycondensation process. A highly anti-adherent flexible compound, that is extremely accurate in its reproduction of fine details.

Zhermack ZA 13 Mold WT45 is a addition silicone (Platinum curing agent) whish has low viscosity, high mechanical resistance, dimensional stability, precision in reproduction. Its color translucid and used in mold making.

Silopren™ LSR 4060 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4060 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 4060 are distinguished by the following properties: Excellent biocompatibility High stability to ozone and ultraviolet light Neutral odor and taste Sterilisable with ethylene oxide, steam and gamma radiation Good transparency High thermal stability High recovery after puncture Easy pigmentable with the LSR Color Pastes Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4060is particularly suitable for the following elastomeric articles: sealing elements, diaphragms, bellows, respiratory devices, vibration dampers, tube connectors, pipette nipples, catheters, parts for medical technical equipment, mats s.o.

Poolkemie SILIMOLD AL 40 is a two component room temperature vulcanising pour able fluid silicon which cures on the addition of the appropriate CATALYST S o SN, according to the polycondensation process. SILIMOLD AL-40 silicon rubber is characterized by its medium-high hardness, an high dimensional stability and a good mechanical resistance. Thanks to these properties, it may also be utilized in the manufacture of molds for the reproduction of large sized patterns.

Zhermack ZA 22 Mold is a addition silicone (Platinum curing agent) which has low viscosity, high mechanical resistance, dimensional stability, precision in reproduction.It appears in blue color and used in mold making.

XTX 45 OIL BLEEDING is a addition silicone (PLATINUM curing agent) which has high transparency adapt for rapid prototyping, high mechanical properties. Two version: DRY and OIL BLEEDING (suggested for the resin). It appears trasparent and used in rapid prototyping.